Date: Tue, 15 Dec 2009 16:33:12 +0100 From: Spil Oss <spil.oss@googlemail.com> To: freebsd-usb@freebsd.org, Hans Petter Selasky <hselasky@c2i.net> Subject: Re: Problem with 2.5" USB drive Message-ID: <5fbf03c20912150733o48f6bc59s5e42b478ebc8dbfd@mail.gmail.com> In-Reply-To: <5fbf03c20912110917q7d41db01rc2d34b93b484d419@mail.gmail.com> References: <5fbf03c20912100108p72de71a8t95937304510c9a9a@mail.gmail.com> <5fbf03c20912100808w5606ef45i988d20c7171454a5@mail.gmail.com> <200912111037.05348.hselasky@c2i.net> <5fbf03c20912110917q7d41db01rc2d34b93b484d419@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Dec 11, 2009 at 6:17 PM, Spil Oss <spil.oss@googlemail.com> wrote: > On Fri, Dec 11, 2009 at 10:37 AM, Hans Petter Selasky <hselasky@c2i.net> = wrote: >> On Thursday 10 December 2009 17:08:53 Spil Oss wrote: >>> On Thu, Dec 10, 2009 at 10:08 AM, Spil Oss <spil.oss@googlemail.com> wr= ote: >>> > Hello all, >>> > >>> > Can't get my 2.5" USB drive to work reliably. The device has a ALI >>> > M5642 Chip and connects 2.5" PATA disks. Vendor 0x0402 is >>> > USB_VENDOR_ACERLABS /* Acer Labs */ which ALi is afaik. >>> > >>> > When I connect it: >>> > Dec =A08 16:11:20 gw root: Unknown USB device: vendor 0x0402 product >>> > 0x5642 bus uhub3 >>> > Dec =A08 16:11:20 gw kernel: ugen3.2: <vendor 0x0402> at usbus3 >>> > Dec =A08 16:11:20 gw kernel: umass0: <vendor 0x0402 USB 2.0 Storage >>> > Device, class 0/0, rev 2.00/1.00, addr 2> on usbus3 >>> > Dec =A08 16:11:20 gw kernel: umass0: =A0SCSI over Bulk-Only; quirks = =3D 0x0000 >>> > Dec =A08 16:11:21 gw kernel: umass0:0:0:-1: Attached to scbus0 >>> > Dec =A08 16:11:21 gw kernel: da0 at umass-sim0 bus 0 target 0 lun 0 >>> > Dec =A08 16:11:21 gw kernel: da0: <USB 2.0 Storage Device 0100> Fixed >>> > Direct Access SCSI-0 device >>> > Dec =A08 16:11:21 gw kernel: da0: 40.000MB/s transfers >>> > Dec =A08 16:11:21 gw kernel: da0: 38154MB (78140160 512 byte sectors: >>> > 255H 63S/T 4864C) >>> > >>> > When I try to dd/fdisk/bsdlabel the disk I tend to get >>> > Dec =A09 12:47:49 gw kernel: (da0:umass-sim0:0:0:0): AutoSense Failed >>> > Sometimes the LED on the cage stays red until I reconnect it. >>> > When I first `usbconfig -u 3 -a 2 reset` and then reconnect the disk >>> > it is recognized again. Tried both on an Intel GM855 and a nVidia >>> > nForce4 system. >>> > >>> > Errors that pop up when transferring data: >>> > Dec =A08 16:11:21 gw kernel: (da0:umass-sim0:0:0:0): SYNCHRONIZE >>> > CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0 >>> > Dec =A08 16:11:21 gw kernel: (da0:umass-sim0:0:0:0): UNIT ATTENTION >>> > asc:28,0 Dec =A08 16:11:21 gw kernel: (da0:umass-sim0:0:0:0): Not rea= dy to >>> > ready change, medium may have changed >>> > >>> > Strangely it seems that this device was recognized on a previous >>> > version of FreeBSD see http://takaq1.plala.jp/freebsd/usb/index.html >>> > (not that I've tried!) Not quite clear what version of FreeBSD that >>> > is. >>> > >>> > Ultimately FreeBSD crashes when I play around too long.. >>> > >>> > Can anyone assist? >>> >>> Saw on the list that usbconfig dump_device_desc is helpful, >>> problematic device is ugen3.2: >>> >>> ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=3D0 md=3DHOST spd=3DFULL = (12Mbps) >>> pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0100 >>> =A0 bDeviceClass =3D 0x0009 >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x0000 >>> =A0 idProduct =3D 0x0000 >>> =A0 bcdDevice =3D 0x0100 >>> =A0 iManufacturer =3D 0x0001 =A0<Intel> >>> =A0 iProduct =3D 0x0002 =A0<UHCI root HUB> >>> =A0 iSerialNumber =3D 0x0000 =A0<no string> >>> =A0 bNumConfigurations =3D 0x0001 >>> >>> ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=3D0 md=3DHOST spd=3DFULL = (12Mbps) >>> pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0100 >>> =A0 bDeviceClass =3D 0x0009 >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x0000 >>> =A0 idProduct =3D 0x0000 >>> =A0 bcdDevice =3D 0x0100 >>> =A0 iManufacturer =3D 0x0001 =A0<Intel> >>> =A0 iProduct =3D 0x0002 =A0<UHCI root HUB> >>> =A0 iSerialNumber =3D 0x0000 =A0<no string> >>> =A0 bNumConfigurations =3D 0x0001 >>> >>> ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=3D0 md=3DHOST spd=3DFULL = (12Mbps) >>> pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0100 >>> =A0 bDeviceClass =3D 0x0009 >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x0000 >>> =A0 idProduct =3D 0x0000 >>> =A0 bcdDevice =3D 0x0100 >>> =A0 iManufacturer =3D 0x0001 =A0<Intel> >>> =A0 iProduct =3D 0x0002 =A0<UHCI root HUB> >>> =A0 iSerialNumber =3D 0x0000 =A0<no string> >>> =A0 bNumConfigurations =3D 0x0001 >>> >>> ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=3D0 md=3DHOST spd=3DHIGH >>> (480Mbps) pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0200 >>> =A0 bDeviceClass =3D 0x0009 >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0001 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x0000 >>> =A0 idProduct =3D 0x0000 >>> =A0 bcdDevice =3D 0x0100 >>> =A0 iManufacturer =3D 0x0001 =A0<Intel> >>> =A0 iProduct =3D 0x0002 =A0<EHCI root HUB> >>> =A0 iSerialNumber =3D 0x0000 =A0<no string> >>> =A0 bNumConfigurations =3D 0x0001 >>> >>> ugen3.2: <USB 2.0 Storage Device vendor 0x0402> at usbus3, cfg=3D0 >>> md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON >>> >>> =A0 bLength =3D 0x0012 >>> =A0 bDescriptorType =3D 0x0001 >>> =A0 bcdUSB =3D 0x0200 >>> =A0 bDeviceClass =3D 0x0000 >>> =A0 bDeviceSubClass =3D 0x0000 >>> =A0 bDeviceProtocol =3D 0x0000 >>> =A0 bMaxPacketSize0 =3D 0x0040 >>> =A0 idVendor =3D 0x0402 >>> =A0 idProduct =3D 0x5642 >>> =A0 bcdDevice =3D 0x0100 >>> =A0 iManufacturer =3D 0x0000 =A0<no string> >>> =A0 iProduct =3D 0x0001 =A0<USB 2.0 Storage Device> >>> =A0 iSerialNumber =3D 0x0002 =A0<12345678901234567890> >>> =A0 bNumConfigurations =3D 0x0001 >>> >>> Thanks! >>> >> >> Have you tried a 9-current kernel? >> >> --HPS >> > Haven't tried a -CURRENT kernel. Guess that a kernel wouldn't be a big > change, but world..... > Have usbdevs.h and/or usbdevs_data.h changed considerably? > Hello all, Tried a GENERIC 9.0-CURRENT kernel csup-ped today just about 2 hours ago. Same problem. I seem to have been able to fdisk the disk, when bsdlabel-ing I get kernel: (da0:umass-sim0:0:0:0) AutoSense Failed The light on the USB cage stays red until I unplug it. Can anyone assist? Kind regards, Spil. PS from uname 9.0-CURRENT Tue Dec 15 15:09:49 CET 2009 /usr/obj/usr/src/sys/GENERIC i386
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5fbf03c20912150733o48f6bc59s5e42b478ebc8dbfd>