Date: Fri, 14 Feb 2003 17:10:45 -0700 From: Scott Long <scott_long@btc.adaptec.com> To: Martin Blapp <mb@imp.ch> Cc: current@freebsd.org Subject: Re: ACPI problems: ACPI-1287: *** Error: Method execution failed AE_AML_BUFFER_LIMIT Message-ID: <3E4D8585.9070108@btc.adaptec.com> In-Reply-To: <20030215005515.Y44623@cvs.imp.ch> References: <20030215005515.Y44623@cvs.imp.ch>
next in thread | previous in thread | raw e-mail | index | archive | help
Martin Blapp wrote: > This IBM X-Series 305 show these ACPI problems. And rebooting the box with > ACPI enabled hangs it (deadlock). > > Feb 13 17:41:05 ibm-01 kernel: acpi0: on motherboard > Feb 13 17:41:05 ibm-01 kernel: ACPI-0625: *** Info: GPE Block0 defined > as GPE0 > to GPE31 > Feb 13 17:41:05 ibm-01 kernel: ACPI-0625: *** Info: GPE Block1 defined > as GPE32 > to GPE63 > Feb 13 17:41:05 ibm-01 kernel: acpi0: power button is handled as a > fixed feature > programming model. > Feb 13 17:41:05 ibm-01 kernel: Timecounter "ACPI-safe" frequency > 3579545 Hz > Feb 13 17:41:05 ibm-01 kernel: unknown: I/O range not supported > Feb 13 17:41:05 ibm-01 kernel: unknown: I/O range not supported > Feb 13 17:41:05 ibm-01 kernel: acpi_timer0: <32-bit timer at > 3.579545MHz> port > 0x40c-0x40f on acpi0 > Feb 13 17:41:05 ibm-01 kernel: acpi_cpu0: on acpi0 > Feb 13 17:41:05 ibm-01 kernel: pcib0: on acpi0 > Feb 13 17:41:05 ibm-01 kernel: ACPI-1287: *** Error: Method execution > failed, > AE_AML_BUFFER_LIMIT > Feb 13 17:41:05 ibm-01 last message repeated 19 times > > Any way to work around this ? During boot, stop the bootloader and enter: set hint.acpi.0.disabled="1" then: boot This is documented in the troubleshooting section of the 5.0 installation guide =-) Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E4D8585.9070108>