Date: Tue, 22 Jun 2004 19:29:20 -0400 (EDT) From: Bryan Liesner <bryan@kishka.net> To: Lukas Ertl <le@freebsd.org> Cc: current@freebsd.org Subject: Re: Testers wanted: USB printers Message-ID: <20040622191512.Y562@gravy.kishka.net> In-Reply-To: <20040622220540.V640@korben.in.tern> References: <20040622220540.V640@korben.in.tern>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 22 Jun 2004, Lukas Ertl wrote: > Hi, > > I'd like to merge a ulpt(4) patch from NetBSD, but since I don't have a > USB printer I'd be glad if someone out there owning such a piece of > hardware could test it: > > <http://people.freebsd.org/~le/ulpt.diff>; > > Thank you, > le I applied the patch and my printer still works. I use gs and the hpijs driver. Here's what I normally see at boot time before and after the patch: ulpt0: hp deskjet 5100, rev 2.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode ulpt0: at uhub1 port 1 (addr 2) disconnected ulpt0: detached ulpt0: hp deskjet 5100, rev 2.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode Here's a little something extra after the patch I've never seen before: uhub1: illegal enable change, port 1 The printer is attached to a NEC usb 2.0 controller card: usb0: OHCI version 1.0 usb0: <NEC uPD 9210 USB controller> on ohci0 usb0: USB revision 1.0 usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci1 usb1: USB revision 1.0 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 usb2: EHCI version 0.95 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 usb3: <VIA 83C572 USB controller> on uhci0 usb3: USB revision 1.0 usb4: <VIA 83C572 USB controller> on uhci1 usb4: USB revision 1.0 usb5: <VIA 83C572 USB controller> on uhci2 usb5: USB revision 1.0 This printer is a USB 2.0 device, but it never was reported as or worked at high speed: Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, deskjet 5100(0x6204), hp(0x03f0), rev 1.00 port 2 powered Controller /dev/usb2: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 addr 2: high speed, self powered, config 2, USB 2.0 Hard Drive(0x3a00), Buslink(0x0caf), rev 11.00 port 2 powered port 3 addr 3: high speed, power 500 mA, config 1, ImageMate CF(0x9191), SanDisk(0x0781), rev 0.29 port 4 powered port 5 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, Trackball(0xc404), Logitech(0x046d), rev 2.20 Controller /dev/usb4: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb5: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 port 1 powered port 2 powered Any other info you'd like, just ask. Thanks
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040622191512.Y562>