Date: 02 Dec 2001 21:24:40 -0600 From: chris barlas <chrisbarlas@home.com> To: freebsd-mobile@FreeBSD.ORG Subject: Orinoco wi0 no dete Message-ID: <20011203032151.HBDQ12947.femail22.sdc1.sfba.home.com@europa.makenode.org>
next in thread | raw e-mail | index | archive | help
I recently have installed FreeBSD 4.4 on my Dell Inspiron Laptop and
have had no luck getting
my orinoco silver working with the wi0 (wiX) driver. I have searched
google but have found
not found anyone else having the same problem. It is not recognizing my
card at all... though
I think in the dmesg there are two or three lines... belowe are the
lines that I think may hold the
answer, plus a full dmesg output. This card has working flawlessly in
OpenBSD 2.9/3.0 and
Linux 2.4.x. Any help or pointers would be greatly appreciated.
Thanx in advance.
::chris::
dmesg ---------->
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
<---------------
bubble# dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (801.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134066176 (130924K bytes)
avail memory = 125931520 (122980K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fbd70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11
pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial
isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial
isa irq]
pccard1: <PC Card bus (classic)> on pcic1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xcce0-0xccff irq
11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at
device 7.3 on pci0
pci0: <unknown card> (vendor=0x125d, dev=0x1998) at 8.0 irq 5
pcib2: <PCI to PCI bridge (vendor=1668 device=0100)> at device 16.0 on
pci0
pci8: <PCI bus> on pcib2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdcc0-0xdcff mem
0xfbe00000-0xfbefffff,0xfbfff000-0xfbffffff irq 11 at device 4.fxp0:
Ethernet address 00:20:e0:6b:a1:a9
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci8: <unknown card> (vendor=0x11c1, dev=0x0448) at 8.0 irq 11
orm0: <Option ROMs> at iomem
0xc0000-0xcffff,0xd0000-0xd17ff,0xd1800-0xd1fff,0xd2000-0xd27ff,0xd2800-0xd2fff,0xd3000-0xd37ff,0fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 19077MB <IC25N020ATDA04-0> [38760/16/63] at ata0-master UDMA33
acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s3a
--
/*------------------------------------------*
* Christopher J. Barlas
* chris@makenode.com chrisbarlas@home.com
* USA
*-------------------------------------------*/
return(0);
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011203032151.HBDQ12947.femail22.sdc1.sfba.home.com>