Date: Mon, 24 Jun 2002 17:23:23 -0700 (PDT) From: mingo lu <freebiebsd@yahoo.com> To: Philip Paeps <philip@paeps.cx> Cc: freebsd-questions <freebsd-questions@FreeBSD.ORG> Subject: Re: SMP problems Message-ID: <20020625002323.5786.qmail@web14808.mail.yahoo.com> In-Reply-To: <20020624093117.GG48808@juno.paeps.cx>
next in thread | previous in thread | raw e-mail | index | archive | help
--0-2139314008-1024964603=:5180 Content-Type: multipart/alternative; boundary="0-1820217776-1024964603=:5180" --0-1820217776-1024964603=:5180 Content-Type: text/plain; charset=us-ascii Thanks. The freebsd version is 4.5 and machine is proliant 800 (dual-cpu, 200 Mhz). I really think that there are bugs for 4.5 version ... _mingo Philip Paeps <philip@paeps.cx> wrote: On 2002-06-24 05:17:03, mingo lu wrote: > I am trying to build SMP kernel with my dual-cpu machine (compaq proliant) > and failed. Which Proliant have you got? What all is in the machine? Compaq has about a hundred different Proliants. > atcually it was compiled with no error. After reboot, it hanged > up at : > > ..... > > Change APIC ID for IO APIC #0 from 0 to 2 on chip > > Programming 24 pins in IOAPIC #0 > > IOAPIC #O intpin 2 -> irq 0 > > The booting process never went beyond this,ust hanged at this point. Weird. > I checked kernel file and found there were no lines (options NCPU, NBUS, > NAPIC and NINTR). I added those lines and tried to recomplied it; the > compilation was failed: Can you post your kernel config file? Be sure to remove the 386_CPU and 486_CPU lines when compiling SMP kernels, they 'confuse' things. [...] - Philip -- Philip Paeps philip@paeps.cx http://www.paeps.cx/ +32 486 114 720 --------------------------------- Do You Yahoo!? Sign-up for Video Highlights of 2002 FIFA World Cup --0-1820217776-1024964603=:5180 Content-Type: text/html; charset=us-ascii <P> Thanks. <P>The freebsd version is 4.5 and machine is proliant 800 (dual-cpu, 200 Mhz). I really think that there are bugs for 4.5 version ... <P> <P>_mingo <P> <B><I>Philip Paeps <philip@paeps.cx></I></B> wrote: <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">On 2002-06-24 05:17:03, mingo lu <FREEBIEBSD@YAHOO.COM>wrote:<BR>> I am trying to build SMP kernel with my dual-cpu machine (compaq proliant)<BR>> and failed. <BR><BR>Which Proliant have you got? What all is in the machine? Compaq has about a<BR>hundred different Proliants.<BR><BR>> atcually it was compiled with no error. After reboot, it hanged<BR>> up at :<BR>><BR>> .....<BR>> <BR>> Change APIC ID for IO APIC #0 from 0 to 2 on chip<BR>> <BR>> Programming 24 pins in IOAPIC #0<BR>> <BR>> IOAPIC #O intpin 2 -> irq 0<BR>> <BR>> The booting process never went beyond this,ust hanged at this point.<BR><BR>Weird.<BR><BR>> I checked kernel file and found there were no lines (options NCPU, NBUS,<BR>> NAPIC and NINTR). I added those lines and tried to recomplied it; the<BR>> compilation was failed:<BR><BR>Can you post your kernel config file? Be sure to remove the 386_CPU and<BR>486_CPU lines when compiling SMP kernels, they 'confuse' things.<BR><BR>[...]<BR><BR>- Philip<BR><BR>-- <BR>Philip Paeps<BR>philip@paeps.cx<BR>http://www.paeps.cx/<BR><BR>+32 486 114 720</BLOCKQUOTE><p><br><hr size=1><b>Do You Yahoo!?</b><br> <a href="http://rd.yahoo.com/welcome/*http://fifaworldcup.yahoo.com/fc/en/spl">Sign-up for Video Highlights</a> of 2002 FIFA World Cup --0-1820217776-1024964603=:5180-- --0-2139314008-1024964603=:5180 Content-Type: text/plain; name=smp Content-Description: smp Content-Disposition: inline; filename=smp # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 murray Exp $ machine i386 # cpu I386_CPU # cpu I486_CPU # cpu I586_CPU cpu I686_CPU # ident GENERIC ident koala maxusers 64 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols # options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking # options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required # options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem # device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID # device dpt # DPT Smartcache - See LINT for options! # device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers # device aac # Adaptec FSA RAID, Dell PERC2/PERC3 # device ida # Compaq Smart RAID # device amr # AMI MegaRAID # device mlx # Mylex DAC960 family # device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support # device card # device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 # device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # device sio2 at isa? disable port IO_COM3 irq 5 # device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. # device de # DEC/Intel DC21x4x (``Tulip'') # device txp # 3Com 3cR990 (``Typhoon'') # device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support # device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) # device pcn # AMD Am79C97x PCI 10/100 NICs # device rl # RealTek 8129/8139 # device sf # Adaptec AIC-6915 (``Starfire'') # device sis # Silicon Integrated Systems SiS 900/SiS 7016 # device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') # device vr # VIA Rhine, Rhine II # device wb # Winbond W89C840F # device wx # Intel Gigabit Ethernet Card (``Wiseman'') device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # device bge # Broadcom BCM570x (``Tigon III'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? port 0x300 # Xircom Ethernet # device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. # device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" # pseudo-device gif # IPv6 and IPv4 tunneling # pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer # device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii # device aue # ADMtek USB ethernet # device cue # CATC USB ethernet # device kue # Kawasaki LSI USB ethernet --0-2139314008-1024964603=:5180-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020625002323.5786.qmail>