Date: Sat, 10 Aug 2002 08:16:22 -0700 (PDT) From: "Łukasz Sznajder" <lukasz.sznajder@webservice.pl> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/41521: system crash after any activity at fxp inteface Message-ID: <200208101516.g7AFGM01054245@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 41521
>Category: i386
>Synopsis: system crash after any activity at fxp inteface
>Confidential: no
>Severity: critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Aug 10 08:20:04 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Łukasz Sznajder
>Release: 4.6-STABLE
>Organization:
Webservice Internet
>Environment:
FreeBSD zywiec 4.6-RELEASE FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC i386
>Description:
First: uname -a taken from 4.6-RELEASE because 4.6-STABLE is unusable for us.
System: INTEL ISP 1210S
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1130.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536608768 (524032K bytes)
avail memory = 517173248 (505052K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00f3bb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib1: <ServerWorks host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xfebe0000-
0xfebe0fff irq 9 at device 7.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2000-0x20ff mem 0xfebf0000-
0xfebf0fff irq 10 at device 7.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0xfe8a0000-0xfe8b
ffff,0xfe8e0000-0xfe8e0fff irq 5 at device 3.0 on pci0
fxp0: Ethernet address 00:03:47:d5:98:81
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x1440-0x147f mem 0xfe860000-0xfe87
ffff,0xfe880000-0xfe880fff irq 7 at device 4.0 on pci0
fxp1: Ethernet address 00:03:47:d5:98:82
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 12.0 irq 9
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x410-0x413,0x3a0-0x3af,0-0x3
,0-0x7,0-0x3,0-0x7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe840000-0xfe840fff irq 10 at devic
e 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib4
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xc
b000-0xd0fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass2 at ahc1 bus 0 target 6 lun 0
pass2: <ESG-SHV SCA HSBP M18 0.06> Fixed Processor SCSI-2 device
pass2: 3.300MB/s transfers
Mounting root from ufs:/dev/da0s1a
da0 at ahc1 bus 0 target 0 lun 0
da0: <SEAGATE ST318203LSUN18G 034A> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
da1 at ahc1 bus 0 target 1 lun 0
da1: <SEAGATE ST318406LC 0109> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
>How-To-Repeat:
Take INTEL ISP 1210S, sources before 15:00 10.08.2002 CET, make buildworld, mergemaster; make installworld; config GENERIC; make depend; make; make install; shutdown -r now
In my case there is a crash after any activity at 3 or higher ip layer
>Fix:
i take back 4.6-RELEASE kernel
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200208101516.g7AFGM01054245>