Date: Mon, 30 Jun 2014 21:16:45 +0200 From: Eduardo Morras <emorrasg@yahoo.es> To: freebsd-questions@freebsd.org Cc: Chris Kelley <mail@thechriskelley.com> Subject: Re: Mount: /dev/da0: Operation not permitted Message-ID: <20140630211645.160e63cb3c9135df08afd85e@yahoo.es> In-Reply-To: <AE1180C0-0C4A-4EBB-AD44-14F6FA905E79@thechriskelley.com> References: <AE1180C0-0C4A-4EBB-AD44-14F6FA905E79@thechriskelley.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 30 Jun 2014 10:32:57 -0700 Chris Kelley <mail@thechriskelley.com> wrote: > Hi, > > I’m trying to get a USB RAID 1+0 formatted as UFS to mount after a > power outage and auto-restart. mount(8) errors with “Operation not > permitted”. I’ve tried the following: > > # mount -t ufs /dev/da0 /mnt/vault > mount: /dev/da0: Operation not permitted > If you try to mount twice you get the same error. Are you sure it isn't mount? > # dmesg | grep da0 > da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 > da0: <JMicron H/W RAID10 > Fixed Direct Access SCSI-2 device > da0: Serial Number AD01EA0D91FF > da0: 40.000MB/s transfers > da0: 1907648MB (3906863104 512 byte sectors: 255H 63S/T 243190C) > da0: quirks=0x2<NO_6_BYTE> This show us you have a disk there, but perhaps disk and the RAID has different /dev name. What's the output of #ls /dev/ > > # fsck -t ufs -fy /dev/da0 > ** /dev/da0 > ** Last Mounted on /mnt/vault > ** Phase 1 - Check Blocks and Sizes > ** Phase 2 - Check Pathnames > ** Phase 3 - Check Connectivity > ** Phase 4 - Check Reference Counts > ** Phase 5 - Check Cyl groups > 1148248 files, 21336627 used, 451688721 free (39393 frags, 56456166 > blocks, 0.0% fragmentation) > > ***** FILE SYSTEM IS CLEAN ***** > > > There doesn’t seem to be any error or message in /var/log/messages > or /var/log/all.log. I’m not quite sure how to handle this. > > > Thanks, > Chris --- --- Eduardo Morras <emorrasg@yahoo.es>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140630211645.160e63cb3c9135df08afd85e>