Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 17 Feb 1999 22:31:29 -0500
From:      Malartre <malartre@aei.ca>
To:        dmaddox@conterra.com
Cc:        questions@FreeBSD.ORG
Subject:   Re: Sound Blaster 16 problems after a re-installation
Message-ID:  <36CB8991.7E441EFF@aei.ca>
References:  <36CB6A1A.801DC9EA@aei.ca> <19990217210842.A8770@dmaddox.conterra.com>

next in thread | previous in thread | raw e-mail | index | archive | help
No it wont work. No error messages...
dmesg:
...snip...
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster 16 4.13>
sbxvi0 at 0x0 drq 5 on isa
sbxvi0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
sbmidi0: <SoundBlaster MPU-401>
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
...snip...
Thank You

"Donald J . Maddox" wrote:
> 
> No way to tell what's wrong from the below.  Maybe you could post your
> dmesg output?  Does 'cat file.au >/dev/audio' work?
> 
> On Wed, Feb 17, 1999 at 08:17:14PM -0500, Malartre wrote:
> > $ vi /sys/i386/conf/F00F
> > # Controls all sound devices
> > # snd: Voxware sound support code
> > controller      snd0
> > # sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
> > device sb0      at isa? port 0x220 irq 5 drq 1 vector sbintr
> > # sbxvi: SoundBlaster 16
> > device sbxvi0   at isa? drq 5 conflicts
> > # sbmidi: SoundBlaster 16 MIDI interface
> > device sbmidi0  at isa? port 0x330
> > # opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
> > device opl0     at isa? port 0x388
> >
> > I used that before. It was a 2.2.5 CVSuped to 2.2.8 and it worked right
> > with "amp". I did a complete new install and I use the same kernel
> > config.
> > $ uname -a
> > FreeBSD 9.nws.net 2.2.8-RELEASE FreeBSD 2.2.8-RELEASE #0: Sat Jan 16
> > 23:50:10 EST 1999     cam@9.nws.net:/usr/src/sys/compile/F00F  i386
> >
> > Under root, here is the error msg:
> > Playing: /dos/mp3/rage-no_shelter.mp3
> > Unable to open the audio device
> >
> > Properties:    stereo 22050Hz
> > Coding Method: MPEG2.0 layer3
> > Bitrate:       56kbit/s
> > Broken pipe
> > What's wrong?
> > Thank You
> > --
> > [Malartre][malartre@aei.ca][French piss me off - Cartman, South Park]
> > [The FreeBSD User Guide][http://www.aei.ca/~malartre/freebsd/]
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> >
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message

-- 
[Malartre][malartre@aei.ca][French piss me off - Cartman, South Park]
[The FreeBSD User Guide][http://www.aei.ca/~malartre/freebsd/]


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36CB8991.7E441EFF>