Date: Wed, 22 Mar 2000 11:56:54 -0700 From: Brian Budnick <brian@utrave.org> To: freebsd-questions@freebsd.org Subject: 4.0-20000314-CURRENT (Keeps Rebooting!) Message-ID: <4.3.0.20000322115356.00af1a88@mail.utrave.org>
next in thread | raw e-mail | index | archive | help
Dear FreeBSD, I just recently installed FreeBSD 4.0-20000314-CURRENT onto a machine last night and every couple hours it just keeps rebooting itself and the error logs say nothing about it so I can't see any reason why it does it. Here is some of my messages log file: Mar 22 11:08:24 blue /kernel: Copyright (c) 1992-2000 The FreeBSD Project. Mar 22 11:08:25 blue /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Mar 22 11:08:25 blue /kernel: The Regents of the University of California. All rights r eserved. Mar 22 11:08:25 blue /kernel: FreeBSD 4.0-20000314-CURRENT #0: Tue Mar 14 12:35:03 GMT 2000 Mar 22 11:08:25 blue /kernel: root@usw2.freebsd.org:/usr/src/sys/compile/GENERIC Mar 22 11:08:25 blue /kernel: Timecounter "i8254" frequency 1193182 Hz Mar 22 11:08:25 blue /kernel: CPU: AMD-K6tm w/ multimedia extensions (167.05-MHz 586-cl ass CPU) Mar 22 11:08:25 blue /kernel: Origin = "AuthenticAMD" Id = 0x562 Stepping = 2 Mar 22 11:08:25 blue /kernel: Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> Mar 22 11:08:25 blue /kernel: AMD Features=0x400<<b10>> Mar 22 11:08:25 blue /kernel: real memory = 134217728 (131072K bytes) Mar 22 11:08:25 blue /kernel: avail memory = 126255104 (123296K bytes) Mar 22 11:08:25 blue /kernel: Preloaded elf kernel "kernel" at 0xc03c0000. Mar 22 11:08:25 blue /kernel: md0: Malloc disk Mar 22 11:08:25 blue /kernel: npx0: <math processor> on motherboard Mar 22 11:08:25 blue /kernel: npx0: INT 16 interface Mar 22 11:08:25 blue /kernel: pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on mo therboard Mar 22 11:08:25 blue /kernel: pci0: <PCI bus> on pcib0 Mar 22 11:08:25 blue /kernel: pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on p ci0 Mar 22 11:08:25 blue /kernel: pci1: <PCI bus> on pcib1 Mar 22 11:08:25 blue /kernel: pci1: <3D Labs model 0009 graphics accelerator> at 0.0 Mar 22 11:08:25 blue /kernel: pci0: <AcerLabs M5237 (Aladdin-V) USB controller> at 2.0 irq 11 Mar 22 11:08:25 blue /kernel: isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 Mar 22 11:08:25 blue /kernel: isa0: <ISA bus> on isab0 Mar 22 11:08:25 blue /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0 xe9000000-0xe90000ff irq 10 at device 9.0 on pci0 Mar 22 11:08:25 blue /kernel: rl0: Ethernet address: 00:4f:4e:03:7f:ee Mar 22 11:08:25 blue /kernel: miibus0: <MII bus> on rl0 Mar 22 11:08:25 blue /kernel: rlphy0: <RealTek internal media interface> on miibus0 Mar 22 11:08:25 blue /kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Mar 22 11:08:25 blue /kernel: rl0: supplying EUI64: 00:4f:4e:ff:fe:03:7f:ee Mar 22 11:08:25 blue /kernel: atapci0: <AcerLabs Aladdin ATA33 controller> port 0xf000- 0xf00f at device 15.0 on pci0 Mar 22 11:08:25 blue /kernel: ata0: at 0x1f0 irq 14 on atapci0 Mar 22 11:08:25 blue /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Mar 22 11:08:25 blue /kernel: fdc0: FIFO enabled, 8 bytes threshold Mar 22 11:08:25 blue /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Mar 22 11:08:25 blue /kernel: atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 Mar 22 11:08:25 blue /kernel: fdc0: FIFO enabled, 8 bytes threshold Mar 22 11:08:25 blue /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Mar 22 11:08:25 blue /kernel: atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 Mar 22 11:08:25 blue /kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 Mar 22 11:08:25 blue /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000 -0xbffff on isa0 Mar 22 11:08:25 blue /kernel: sc0: <System console> on isa0 Mar 22 11:08:25 blue /kernel: sc0: VGA <16 virtual consoles, flags=0x200> Mar 22 11:08:25 blue /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Mar 22 11:08:25 blue /kernel: sio0: type 16550A Mar 22 11:08:25 blue /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Mar 22 11:08:25 blue /kernel: sio1: type 16550A Mar 22 11:08:25 blue /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Mar 22 11:08:25 blue /kernel: ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode Mar 22 11:08:25 blue /kernel: ppi0: <Parallel I/O> on ppbus0 Mar 22 11:08:25 blue /kernel: lpt0: <Printer> on ppbus0 Mar 22 11:08:25 blue /kernel: lpt0: Interrupt-driven port Mar 22 11:08:25 blue /kernel: plip0: <PLIP network interface> on ppbus0 Mar 22 11:08:25 blue /kernel: ad0: 6187MB <FUJITSU MPC3064AT> [13410/15/63] at ata0-mas ter using UDMA33 Mar 22 11:08:25 blue /kernel: Mounting root from ufs:/dev/ad0s1a Mar 22 11:08:25 blue /kernel: WARNING: / was not properly dismounted Mar 22 11:08:25 blue /kernel: rl0: starting DAD for fe80:0001::024f:4eff:fe03:7fee Mar 22 11:08:25 blue named[76]: starting. named 8.2.2-P5-NOESW Tue Mar 14 10:48:52 GMT 2000 root@usw2.freebsd.org:/usr/obj/usr/src/usr.sbin/named Mar 22 11:08:25 blue named[76]: limit files set to fdlimit (1024) Mar 22 11:08:25 blue named[77]: Ready to answer queries. Mar 22 11:08:25 blue /kernel: rl0: DAD complete for fe80:0001::024f:4eff:fe03:7fee - no duplicates found Then about 3 hours later you will see that it will just display the same message again. I'm running a K6/166Mhz with 128megs of Ram, 6.4GIG HardDrive. This machine use to run 3.4-STABLE and it ran perfectly. I'm almost to the point of going back to 3.4-STABLE and just staying there until 5.0 get released or something. Any ideas?? Brian. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.0.20000322115356.00af1a88>