Skip site navigation (1)Skip section navigation (2)
Date:      05 May 2004 21:48:17 +0200
From:      "Arno J. Klaassen" <arno@heho.snv.jussieu.fr>
To:        freebsd-current@freebsd.org
Subject:   atapicam problem
Message-ID:  <wpisfabqpq.fsf@heho.snv.jussieu.fr>

next in thread | raw e-mail | index | archive | help
--=-=-=

hello,

when I compile in atapicam in my kernel (with or without CAMDEBUG)
I get :

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0xff00ff2c
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc0442720
stack pointer           = 0x10:0xc0c21bbc
frame pointer           = 0x10:0xc0c21bbc
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
kernel: type 12 trap, code=0
Stopped at      xpt_find_device+0x10:   cmpl    %edx,0x2c(%eax)
db> tr 0
xpt_find_device(c4f19a40,0,c0568ad7,1,c4f0d8f0) at xpt_find_device+0x10
xpt_compile_path(c4f0d8f0,c1b6fc00,0,1,0) at xpt_compile_path+0x4f
xpt_create_path(c0c21c3c,c1b6fc00,0,1,0) at xpt_create_path+0x59
xpt_scan_bus(c1b6fc00,c504c400,c06bf737,c4f0d890,3) at xpt_scan_bus+0x2e5
xpt_action(c504c400,c504c400,1,ffffffff,ffffffff) at xpt_action+0x907
xptconfigfunc(c4f19b40,0,0,0,c0c21d1c) at xptconfigfunc+0xfb
xptdefbusfunc(c4f19b40,c0c21d30,0,c07af2b0,c076da98) at xptdefbusfunc+0x21
xptbustraverse(0,c043f4e0,c0c21d30,0,c0443fc0) at xptbustraverse+0x2c
xpt_for_all_busses(c0443fc0,0,c0c21d70,c058b2fb,0) at xpt_for_all_busses+0x35
xpt_config(0,c057d426,c07cb024,3e8,c057d3f0) at xpt_config+0x59
run_interrupt_driven_config_hooks(0,c000897f,0,c076dad0,c076dad0) at run_interru
pt_driven_config_hooks+0x2b
mi_startup() at mi_startup+0xa1
begin() at begin+0x2c
db>

For info, please find attached :

atapicam.dmesg (a bit cut-off, I just have an old win98 box
with hyperterminal to server as serial console)

std.dmesg (same KERNCONF, recompiled without atapicam;
KERNCONF basically is GENERIC, unneeded drivers commented out,
SCHED_4BSD,HZ=1000 and acpi compiled into the kernel)

Regards, Arno


--=-=-=
Content-Type: application/octet-stream
Content-Disposition: attachment; filename=atapicam.dmesg

\_SB_.PCI0.FNC0.LNKG irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.2.0
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.0
\_SB_.PCI0.FNC0.LNKB irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.1
\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.10.0
\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.0
\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.1
\_SB_.PCI0.FNC0.LNKH irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.6.0
\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.18.0
\_SB_.PCI0.FNC0.LNKG irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.2.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 3, range 32, base f0000000, size 26, enabled
found-> vendor=0x10b9, dev=0x1644, revid=0x01
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0xa210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 1  supports D0 D3  current D0
found-> vendor=0x10b9, dev=0x5247, revid=0x00
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x0400, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        map[10]: type 1, range 32, base f7eff000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \_SB_.PCI0.FNC0.LNKG)
pcib0: slot 2 INTA is routed to irq 11
found-> vendor=0x10b9, dev=0x5237, revid=0x03
        bus=0, slot=2, func=0
        class=0c-03-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000eff0, size  4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc3
        bus=0, slot=4, func=0
        class=01-01-f0, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
        intpin=a, irq=255
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000ed00, size  8, enabled
        map[14]: type 1, range 32, base f7efe000, size 12, enabled
pcib0: matched entry for 0.6.INTA (src \_SB_.PCI0.FNC0.LNKH)
pcib0: slot 6 INTA is routed to irq 11
found-> vendor=0x10b9, dev=0x5451, revid=0x01
        bus=0, slot=6, func=0
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
found-> vendor=0x10b9, dev=0x1533, revid=0x00
        bus=0, slot=7, func=0
        class=06-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 1  supports D0 D3  current D0
found-> vendor=0x10b9, dev=0x7101, revid=0x00
        bus=0, slot=8, func=0
        class=06-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type 1, range 32, base f7efd000, size 12, enabled
        map[14]: type 4, range 32, base 0000eb40, size  6, enabled
        map[18]: type 1, range 32, base f7ec0000, size 17, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.FNC0.LNKD)
pcib0: slot 10 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1229, revid=0x0d
        bus=0, slot=10, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x1179, dev=0x0617, revid=0x32
        bus=0, slot=17, func=0
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        powerspec 1  supports D0 D3  current D0
        map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x1179, dev=0x0617, revid=0x32
        bus=0, slot=17, func=1
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=255
        powerspec 1  supports D0 D3  current D0
        map[10]: type 1, range 32, base f7ebfe00, size  9, enabled
pcib0: matched entry for 0.18.INTA (src \_SB_.PCI0.FNC0.LNKA)
pcib0: slot 18 INTA is routed to irq 11
found-> vendor=0x1179, dev=0x0805, revid=0x03
        bus=0, slot=18, func=0
        class=08-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 o
n pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf7f00000-0xfdffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 1.0.0
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
        map[10]: type 1, range 32, base fc000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xfc000000-0xfdffffff
        map[14]: type 1, range 32, base fbc00000, size 22, enabled
pcib1: device (null) requested decoded memory range 0xfbc00000-0xfbffffff
        map[18]: type 1, range 32, base f8000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xf8000000-0xf9ffffff
        map[1c]: type 1, range 32, base f7ff8000, size 15, enabled
pcib1: device (null) requested decoded memory range 0xf7ff8000-0xf7ffffff
pcib1: matched entry for 1.0.INTA (src \_SB_.PCI0.FNC0.LNKC)
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x1023, dev=0x8820, revid=0x82
        bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
        lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf7eff000-0xf7efffff irq
 11 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7eff000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xeff0-0xefff,0x376,0x170-0x1
77,0x3f6,0x1f0-0x1f7 at device 4.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xeff0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Acer Labs M5451> port 0xed00-0xedff mem 0xf7efe000-0xf7efefff irq 11 at d
evice 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xed00
pcm0: <Asahi Kasei AK4543 AC97 Codec (id = 0x414b4d02)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM
 3D Audio
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 29c000, 1000; 0xc4ee8000 -> 29c000
pcm0: sndbuf_setmap 2be000, 1000; 0xc4eea000 -> 2be000
pcm0: sndbuf_setmap 2f8000, 1000; 0xc4f04000 -> 2f8000
pcm0: sndbuf_setmap 2f6000, 1000; 0xc4f02000 -> 2f6000
pcm0: sndbuf_setmap 2f4000, 1000; 0xc4f00000 -> 2f4000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 8.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xeb40-0xeb7f mem 0xf7ec0000-0xf7edfff
f,0xf7efd000-0xf7efdfff irq 11 at device 10.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7efd000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 1179 0001 000d
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:00:39:bd:7b:b1
fxp0: [GIANT-LOCKED]
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 17.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.17.INTA (src \_SB_.PCI0.FNC0.LNKA)
pcib0: slot 17 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x06171179 0x04900007 0x06070032 0x00824000
  0x10: 0xf4000000 0x04800080 0x00030300 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
  0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b
  0x40: 0x00011179 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00010001 0x00800000 0x00000000 0x01000000
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000
  0xa0: 0x860011f0 0x0c000000 0x00008000 0x0000d100
  0xb0: 0x3f3f3fcf 0x0a081020 0x10010100 0x00023f00
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 17.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.17.INTB (src \_SB_.PCI0.FNC0.LNKB)
pcib0: slot 17 INTB is routed to irq 11
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x06171179 0x04900007 0x06070032 0x00824000
  0x10: 0xf4001000 0x04800080 0x00040400 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
  0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b
  0x40: 0x00011179 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00010001 0x00800000 0x00000000 0x01000000
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000
  0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100
  0xb0: 0x3f3f3fcf 0x0a081020 0x10010100 0x00023f00
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci0: <base peripheral> at device 18.0 (no driver attached)
unknown: not probed (disabled)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_toshiba0: <Toshiba HCI Extras> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
linprocfs registered
procfs registered
Timecounter "TSC" frequency 995963561 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA66 on AcerLabs Aladdin chip
ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
[0] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:16322040 l:22748040
[1] f:80 typ:23 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:16321977
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 8356884480 length 11646996480 end 20003880959
GEOM: Configure ad0s2, start 32256 length 8356852224 end 8356884479
GEOM: Configure ad0s1a, start 0 length 262144000 end 262143999
GEOM: Configure ad0s1b, start 524288000 length 536870912 end 1061158911
GEOM: Configure ad0s1c, start 0 length 11646996480 end 11646996479
GEOM: Configure ad0s1d, start 262144000 length 262144000 end 524287999
GEOM: Configure ad0s1e, start 1061158912 length 10585837568 end 11646996479
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <UJDA720 DVD/CDRW/1.00> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm photo disc


Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0xff00ff2c
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc0442720
stack pointer           = 0x10:0xc0c21bbc
frame pointer           = 0x10:0xc0c21bbc
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
kernel: type 12 trap, code=0
Stopped at      xpt_find_device+0x10:   cmpl    %edx,0x2c(%eax)
db> tr 0
xpt_find_device(c4f19a40,0,c0568ad7,1,c4f0d8f0) at xpt_find_device+0x10
xpt_compile_path(c4f0d8f0,c1b6fc00,0,1,0) at xpt_compile_path+0x4f
xpt_create_path(c0c21c3c,c1b6fc00,0,1,0) at xpt_create_path+0x59
xpt_scan_bus(c1b6fc00,c504c400,c06bf737,c4f0d890,3) at xpt_scan_bus+0x2e5
xpt_action(c504c400,c504c400,1,ffffffff,ffffffff) at xpt_action+0x907
xptconfigfunc(c4f19b40,0,0,0,c0c21d1c) at xptconfigfunc+0xfb
xptdefbusfunc(c4f19b40,c0c21d30,0,c07af2b0,c076da98) at xptdefbusfunc+0x21
xptbustraverse(0,c043f4e0,c0c21d30,0,c0443fc0) at xptbustraverse+0x2c
xpt_for_all_busses(c0443fc0,0,c0c21d70,c058b2fb,0) at xpt_for_all_busses+0x35
xpt_config(0,c057d426,c07cb024,3e8,c057d3f0) at xpt_config+0x59
run_interrupt_driven_config_hooks(0,c000897f,0,c076dad0,c076dad0) at run_interru
pt_driven_config_hooks+0x2b
mi_startup() at mi_startup+0xa1
begin() at begin+0x2c
db>

--=-=-=
Content-Type: application/octet-stream
Content-Disposition: attachment; filename=std.dmesg

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #9: Wed May  5 21:22:14 MEST 2004
    toor@M:/usr/src/sys/i386/compile/Sat-current
Preloaded elf kernel "/boot/kernel/kernel.test" at 0xc089e000.
Calibrating clock(s) ... i8254 clock: 1193182 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 994970049 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1000MHz (994.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 653656064 (623 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x0000000026439fff, 629227520 bytes (153620 pages)
avail memory = 629932032 (600 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f00b0
bios32: Entry = 0xf98e9 (c00f98e9)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x97ab
pnpbios: Found PnP BIOS data at 0xc00f0260
pnpbios: Entry = f0000:8d8  Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID c936f351
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
cpu0 on motherboard
acpi0: <TOSHIB 750> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000084
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=164410b9)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f01d0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    2    A   0x59  11
embedded    0    6    A   0x08  11
embedded    0   17    A   0x01  11
embedded    0   17    B   0x02  11
embedded    0   10    A   0x04  11
embedded    1    0    A   0x03  11
embedded    0   16    A   0x03  11
embedded    0   16    B   0x04  11
embedded    0   18    A   0x01  11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 3, max = 7, width = 4
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 7, width = 5
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
acpi_cpu0: <CPU> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.0
\\_SB_.PCI0.FNC0.LNKB irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.1
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.10.0
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.0
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.1
\\_SB_.PCI0.FNC0.LNKH irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.6.0
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.FNC0.LNKG irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.2.0
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.0
\\_SB_.PCI0.FNC0.LNKB irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.17.1
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.10.0
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.0
\\_SB_.PCI0.FNC0.LNKD irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.16.1
\\_SB_.PCI0.FNC0.LNKH irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.6.0
\\_SB_.PCI0.FNC0.LNKA irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.FNC0.LNKG irq  11: [  3  4  5  6  7 10 11] low,level,sharable 0.2.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f0000000, size 26, enabled
found->	vendor=0x10b9, dev=0x1644, revid=0x01
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0xa210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x5247, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0400, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f7eff000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.FNC0.LNKG)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x10b9, dev=0x5237, revid=0x03
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000eff0, size  4, enabled
found->	vendor=0x10b9, dev=0x5229, revid=0xc3
	bus=0, slot=4, func=0
	class=01-01-f0, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000ed00, size  8, enabled
	map[14]: type 1, range 32, base f7efe000, size 12, enabled
pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.FNC0.LNKH)
pcib0: slot 6 INTA is routed to irq 11
found->	vendor=0x10b9, dev=0x5451, revid=0x01
	bus=0, slot=6, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x10b9, dev=0x1533, revid=0x00
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
found->	vendor=0x10b9, dev=0x7101, revid=0x00
	bus=0, slot=8, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base f7efd000, size 12, enabled
	map[14]: type 4, range 32, base 0000eb40, size  6, enabled
	map[18]: type 1, range 32, base f7ec0000, size 17, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.FNC0.LNKD)
pcib0: slot 10 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x1229, revid=0x0d
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found->	vendor=0x1179, dev=0x0617, revid=0x32
	bus=0, slot=17, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 1  supports D0 D3  current D0
	map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found->	vendor=0x1179, dev=0x0617, revid=0x32
	bus=0, slot=17, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 1  supports D0 D3  current D0
	map[10]: type 1, range 32, base f7ebfe00, size  9, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.FNC0.LNKA)
pcib0: slot 18 INTA is routed to irq 11
found->	vendor=0x1179, dev=0x0805, revid=0x03
	bus=0, slot=18, func=0
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf7f00000-0xfdffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 1.0.0
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.FNC0.LNKC irq  11: [  3  4  5  6  7 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base fc000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xfc000000-0xfdffffff
	map[14]: type 1, range 32, base fbc00000, size 22, enabled
pcib1: device (null) requested decoded memory range 0xfbc00000-0xfbffffff
	map[18]: type 1, range 32, base f8000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xf8000000-0xf9ffffff
	map[1c]: type 1, range 32, base f7ff8000, size 15, enabled
pcib1: device (null) requested decoded memory range 0xf7ff8000-0xf7ffffff
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.FNC0.LNKC)
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x1023, dev=0x8820, revid=0x82
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf7eff000-0xf7efffff irq 11 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7eff000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xeff0-0xefff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xeff0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Acer Labs M5451> port 0xed00-0xedff mem 0xf7efe000-0xf7efefff irq 11 at device 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xed00
pcm0: <Asahi Kasei AK4543 AC97 Codec (id = 0x414b4d02)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM 3D Audio
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 29c000, 1000; 0xc4ee8000 -> 29c000
pcm0: sndbuf_setmap 2be000, 1000; 0xc4eea000 -> 2be000
pcm0: sndbuf_setmap 2f9000, 1000; 0xc4f05000 -> 2f9000
pcm0: sndbuf_setmap 2f7000, 1000; 0xc4f03000 -> 2f7000
pcm0: sndbuf_setmap 2d5000, 1000; 0xc4f01000 -> 2d5000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 8.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xeb40-0xeb7f mem 0xf7ec0000-0xf7edffff,0xf7efd000-0xf7efdfff irq 11 at device 10.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7efd000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 1179 0001 000d
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:00:39:bd:7b:b1
fxp0: [GIANT-LOCKED]
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 17.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.FNC0.LNKA)
pcib0: slot 17 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x06171179 0x04900007 0x06070032 0x00824000 
  0x10: 0xf4000000 0x04800080 0x00030300 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 
  0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 
  0x40: 0x00011179 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00010001 0x00800000 0x00000000 0x01000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x860011f0 0x0c000000 0x00008000 0x0000d100 
  0xb0: 0x3f3f3fcf 0x0a081020 0x10010100 0x00023f00 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 17.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.17.INTB (src \\_SB_.PCI0.FNC0.LNKB)
pcib0: slot 17 INTB is routed to irq 11
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x06171179 0x04900007 0x06070032 0x00824000 
  0x10: 0xf4001000 0x04800080 0x00040400 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 
  0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 
  0x40: 0x00011179 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00010001 0x00800000 0x00000000 0x01000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100 
  0xb0: 0x3f3f3fcf 0x0a081020 0x10010100 0x00023f00 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 
pci0: <base peripheral> at device 18.0 (no driver attached)
unknown: not probed (disabled)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_toshiba0: <Toshiba HCI Extras> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
linprocfs registered
procfs registered
Timecounter "TSC" frequency 994970049 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA66 on AcerLabs Aladdin chip
ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
[0] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:16322040 l:22748040
[1] f:80 typ:23 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:16321977
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 8356884480 length 11646996480 end 20003880959
GEOM: Configure ad0s2, start 32256 length 8356852224 end 8356884479
GEOM: Configure ad0s1a, start 0 length 262144000 end 262143999
GEOM: Configure ad0s1b, start 524288000 length 536870912 end 1061158911
GEOM: Configure ad0s1c, start 0 length 11646996480 end 11646996479
GEOM: Configure ad0s1d, start 262144000 length 262144000 end 524287999
GEOM: Configure ad0s1e, start 1061158912 length 10585837568 end 11646996479
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <UJDA720 DVD/CDRW/1.00> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm photo disc
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Pre-seeding PRNG:
 kickstart
.
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 66182 free (1198 frags, 8123 blocks, 1.0% fragmentation)
/dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 1248574 free (190798 frags, 132222 blocks, 3.8% fragmentation)
/dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 114043 free (291 frags, 14219 blocks, 0.2% fragmentation)

--=-=-=--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wpisfabqpq.fsf>