Date: Fri, 13 Nov 2009 21:31:03 -0800 From: David Wolfskill <david@catwhisker.org> To: freebsd-hardware@freebsd.org Subject: Re: Msg: no prefetched decode (going from stable/6 -> stable/7) Message-ID: <20091114053103.GG1649@albert.catwhisker.org> In-Reply-To: <20091114052429.GF1649@albert.catwhisker.org> References: <20091114052429.GF1649@albert.catwhisker.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--U3BNvdZEnlJXqmh+ Content-Type: multipart/mixed; boundary="yZnyZsPjQYjG7xG7" Content-Disposition: inline --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Nov 13, 2009 at 09:24:29PM -0800, David Wolfskill wrote: > ... > So this evening, I booted each of the slices in turn to single user > mode, then (in each case) entered: >=20 > * fsck -p && mount -a > * csh > * uname -a >/var/tmp/pciconf.N > * pciconf -lv >>!$ > * dmesg >/vat/tmp/dmesg.N >=20 > (where "N" was one of "6", "7", "8", or "9", according to the version of > FreeBSD being run at the time). >=20 > I've attached the resulting files. =2E... Errr... works better what I actually *do* it. Sorry. :-( Peace, david --=20 David H. Wolfskill david@catwhisker.org Depriving a girl or boy of an opportunity for education is evil. See http://www.catwhisker.org/~david/publickey.gpg for my public key. --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.6" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.4-STABLE #700 r199014: Sat Nov 7 04:28:00 PST 2009 root@g1-101.catwhisker.org:/common/S1/obj/usr/src/sys/CANARY Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c2a000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c2a14c. Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0c2a1f8. Preloaded elf module "/boot/kernel/firmware.ko" at 0xc0c2a2a4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c2a354. Calibrating clock(s) ... i8254 clock: 1193197 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2392948164 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz (2392.95-MHz 686-class CP= U) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x400<CNXT-ID> real memory =3D 2147360768 (2047 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000007db91fff, 2092355584 bytes (510829 pages) avail memory =3D 2092195840 (1995 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Oct 20 2009 05:01:45) hptrr: HPT RocketRAID controller driver v1.1 (Oct 20 2009 05:01:42) npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIRQ -> bus 0 dev 31 func 0 acpi0: wakeup code va 0xda768000 pa 0x9d000 atpic: Programming IRQ9 as level/low ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 Validation 0 11 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x8e0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 11 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x04 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x04 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=3D0x8086, dev=3D0x2484, revid=3D0x02 bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x2487, revid=3D0x02 bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type 4, range 32, base 0000bfa0, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc40, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000d080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xebffffff at device = 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x4c66, revid=3D0x01 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x01a7, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: requested memory range 0xe0000000-0xe7ffffff: good map[14]: type 4, range 32, base 0000c000, size 8, enabled pcib1: requested I/O range 0xc000-0xc0ff: in range map[18]: type 1, range 32, base fcff0000, size 16, enabled pcib1: requested memory range 0xfcff0000-0xfcffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xbf40-0xbf5f i= rq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f i= rq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [GIANT-LOCKED] usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.1.INTA at func 0: 255 ACPI: Found matching pin for 2.1.INTA at func 1: 255 ACPI: Found matching pin for 2.1.INTA at func 2: 11 ACPI: Found matching pin for 2.3.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=3D2 found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x78 bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000ec80, size 7, enabled pcib2: requested I/O range 0xec80-0xecff: in range map[14]: type 1, range 32, base f8fffc00, size 7, enabled pcib2: requested memory range 0xf8fffc00-0xf8fffc7f: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 bus=3D2, slot=3D1, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 bus=3D2, slot=3D1, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0x8027, revid=3D0x00 bus=3D2, slot=3D1, func=3D2 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base f8fff000, size 11, enabled pcib2: requested memory range 0xf8fff000-0xf8fff7ff: good map[14]: type 1, range 32, base f8ff8000, size 14, enabled pcib2: requested memory range 0xf8ff8000-0xf8ffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x4220, revid=3D0x05 bus=3D2, slot=3D3, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0016, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f8ffe000, size 12, enabled pcib2: requested memory range 0xf8ffe000-0xf8ffefff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x1011, dev=3D0x0022, revid=3D0x04 bus=3D2, slot=3D12, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x02 (500 ns) powerspec 1 supports D0 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0= xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:08:74:e9:c9:41 xl0: [MPSAFE] cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0xf4000000-0xfbffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0xf4000000 0x020000a0 0x20040400 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: cbb1 requested memory range 0xf4000000-0xfbffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0xf4001000 0x020000a0 0x20050500 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 fwohci0: <Texas Instruments PCI4451> mem 0xf8fff000-0xf8fff7ff,0xf8ff8000-0= xf8ffbfff irq 11 at device 1.2 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8fff000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 42:4f:c0:00:07:2c:30:41 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:2c:30:41 fwe0: bpf attached fwe0: Ethernet address: 42:4f:c0:2c:30:41 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xf8ffe000-0xf8ffefff irq 11 at de= vice 3.0 on pci2 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8ffe000 iwi0: bpf attached iwi0: Ethernet address: 00:0e:35:aa:11:ca iwi0: bpf attached iwi0: bpf attached iwi0: [MPSAFE] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci2 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xffff pcib3: memory decode 0xfa000000-0xfbffffff pcib3: prefetched decode 0xfff00000-0xfffff ACPI: Found matching pin for 3.5.INTA at func 0: 11 ACPI: Found matching pin for 3.1.INTA at func 0: 11 ACPI: Found matching pin for 3.2.INTA at func 0: 11 ACPI: Found matching pin for 3.7.INTA at func 0: 11 ACPI: Found matching pin for 3.8.INTA at func 0: 11 pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3D3 found-> vendor=3D0x10b7, dev=3D0x9055, revid=3D0x30 bus=3D3, slot=3D1, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000fc80, size 7, enabled pcib3: requested I/O range 0xfc80-0xfcff: in range pcib2: requested I/O range 0xfc80-0xfcff: in range map[14]: type 1, range 32, base fafffc00, size 7, enabled pcib3: requested memory range 0xfafffc00-0xfafffc7f: good pcib2: requested memory range 0xfafffc00-0xfafffc7f: good pcib3: matched entry for 3.1.INTA (src \\_SB_.PCI0.LNKC:0) pcib3: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x11ad, dev=3D0x0002, revid=3D0x20 bus=3D3, slot=3D2, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[10]: type 4, range 32, base 0000f800, size 8, enabled pcib3: requested I/O range 0xf800-0xf8ff: in range pcib2: requested I/O range 0xf800-0xf8ff: in range map[14]: type 1, range 32, base fafff800, size 8, enabled pcib3: requested memory range 0xfafff800-0xfafff8ff: good pcib2: requested memory range 0xfafff800-0xfafff8ff: good pcib3: matched entry for 3.2.INTA (src \\_SB_.PCI0.LNKC:0) pcib3: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x1095, dev=3D0x0646, revid=3D0x07 bus=3D3, slot=3D5, func=3D0 class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000fc78, size 3, enabled pcib3: requested I/O range 0xfc78-0xfc7f: in range pcib2: requested I/O range 0xfc78-0xfc7f: in range map[14]: type 4, range 32, base 0000fc70, size 2, enabled pcib3: requested I/O range 0xfc70-0xfc73: in range pcib2: requested I/O range 0xfc70-0xfc73: in range map[18]: type 4, range 32, base 0000fc60, size 3, enabled pcib3: requested I/O range 0xfc60-0xfc67: in range pcib2: requested I/O range 0xfc60-0xfc67: in range map[1c]: type 4, range 32, base 0000fc58, size 2, enabled pcib3: requested I/O range 0xfc58-0xfc5b: in range pcib2: requested I/O range 0xfc58-0xfc5b: in range map[20]: type 4, range 32, base 0000fc40, size 4, enabled pcib3: requested I/O range 0xfc40-0xfc4f: in range pcib2: requested I/O range 0xfc40-0xfc4f: in range pcib3: matched entry for 3.5.INTA (src \\_SB_.PCI0.LNKC:0) pcib3: slot 5 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x9004, dev=3D0x8078, revid=3D0x01 bus=3D3, slot=3D7, func=3D0 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x08 (2000 ns) intpin=3Da, irq=3D11 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000f000, size 8, enabled pcib3: requested I/O range 0xf000-0xf0ff: in range pcib2: requested I/O range 0xf000-0xf0ff: in range map[14]: type 1, range 32, base faffe000, size 12, enabled pcib3: requested memory range 0xfaffe000-0xfaffefff: good pcib2: requested memory range 0xfaffe000-0xfaffefff: good pcib3: matched entry for 3.7.INTA (src \\_SB_.PCI0.LNKC:0) pcib3: slot 7 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x6c bus=3D3, slot=3D8, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000f400, size 7, enabled pcib3: requested I/O range 0xf400-0xf47f: in range pcib2: requested I/O range 0xf400-0xf47f: in range map[14]: type 1, range 32, base fafff400, size 7, enabled pcib3: requested memory range 0xfafff400-0xfafff47f: good pcib2: requested memory range 0xfafff400-0xfafff47f: good pcib3: matched entry for 3.8.INTA (src \\_SB_.PCI0.LNKC:0) pcib3: slot 8 INTA routed to irq 11 via \\_SB_.PCI0.LNKC xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xfc80-0xfcff mem 0xfafffc00-0= xfafffc7f irq 11 at device 1.0 on pci3 xl1: Reserved 0x80 bytes for rid 0x14 type 3 at 0xfafffc00 xl1: using memory mapped I/O xl1: media options word: a xl1: found MII/AUTO miibus1: <MII bus> on xl1 xlphy0: <3Com internal media interface> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: bpf attached xl1: Ethernet address: 00:50:da:23:e6:d2 xl1: [MPSAFE] dc0: <82c169 PNIC 10/100BaseTX> port 0xf800-0xf8ff mem 0xfafff800-0xfafff8f= f irq 11 at device 2.0 on pci3 dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf800 miibus2: <MII bus> on dc0 bmtphy0: <BCM5201 10/100baseTX PHY> on miibus2 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc0: Ethernet address: 00:02:e3:06:ac:4c dc0: [MPSAFE] atapci0: <SiI CMD 646U2 UDMA33 controller> port 0xfc78-0xfc7f,0xfc70-0xfc73= ,0xfc60-0xfc67,0xfc58-0xfc5b,0xfc40-0xfc4f irq 11 at device 5.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc40 atapci0: [MPSAFE] atapci0: HW has secondary channel disabled ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfc78 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfc70 ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata2: stat0=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0 ata2: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata2: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata2: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER> ata2: [MPSAFE] ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xf000-0xf0ff mem 0xfaffe00= 0-0xfaffefff irq 11 at device 7.0 on pci3 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf000 ahc0: Reading SEEPROM...checksum error ahc0: No SEEPROM available. ahc0: Host Adapter Bios disabled. Using default SCSI device parameters ahc0: Downloading Sequencer Program... 434 instructions downloaded ahc0: Features 0x10001, Bugs 0x11, Flags 0x8401f64 ahc0: [GIANT-LOCKED] aic7880: Ultra Single Channel A, SCSI Id=3D7, 16/253 SCBs xl2: <3Com 3c905C-TX Fast Etherlink XL> port 0xf400-0xf47f mem 0xfafff400-0= xfafff47f irq 11 at device 8.0 on pci3 xl2: Reserved 0x80 bytes for rid 0x14 type 3 at 0xfafff400 xl2: using memory mapped I/O xl2: media options word: a xl2: found MII/AUTO miibus3: <MII bus> on xl2 xlphy1: <3c905C 10/100 internal PHY> on miibus3 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl2: bpf attached xl2: Ethernet address: 00:b0:d0:12:47:87 xl2: [MPSAFE] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x9<ATAPI_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D3f ostat1=3D3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat1=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: reset tp2 stat0=3Dbf stat1=3Dbf devices=3D0x0 ata1: [MPSAFE] pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc40-0xdc7f irq 9 at devi= ce 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc40 pcm0: [MPSAFE] pcm0: <Cirrus Logic CS4205 AC97 Codec (id =3D 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bi= t DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic,= AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: sndbuf_setmap 7d78a000, 4000; 0xeaf0e000 -> 7d78a000 pcm0: sndbuf_setmap 7d786000, 4000; 0xeaf12000 -> 7d786000 pcm0: sndbuf_setmap 7d775000, 4000; 0xeaf16000 -> 7d775000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 speaker0: <PC speaker> port 0x61,0x63,0x65,0x67 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0xa01 0xa11 0xa01 0xa01 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 = on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xa01 0xa01 0xa01 0xa01 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 134102 -> 100000 procfs registered Timecounter "TSC" frequency 2392948164 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached DUMMYNET with IPv6 initialized (040826) ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding enabled, d= efault to deny, logging unlimited rr232x: no controller detected. hptrr: no controller detected. Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout acpi_acad0: acline initialization start battery0: battery initialization start battery1: battery initialization start battery1: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization done, tried 1 times ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire ad0: setting PIO4 on ICH3 chip ad0: setting UDMA100 on ICH3 chip ad0: 114473MB <FUJITSU MHV2120AH 000000A0> at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on ICH3 chip acd0: setting UDMA33 on ICH3 chip acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4241N/A100> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire acd1: setting PIO4 on CMD 646U2 chip acd1: setting UDMA33 on CMD 646U2 chip acd1: <HL-DT-STCD-RW/DVD-ROM GCC-4240N/D110> CDRW drive at ata2 as master acd1: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd1: Writes: CDR, CDRW, test write, burnproof acd1: Audio: play, 256 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc pcm0: measured ac97 link rate at 48004 Hz, will use 48000 Hz fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe14:ata0:0:1:0): error 22 (probe14:ata0:0:1:0): Unretryable Error acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe15:ata2:0:0:0): error 22 (probe15:ata2:0:0:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ahc0: Selection Timeout on A:0. 0 SCBs aborted ahc0: Selection Timeout on A:1. 0 SCBs aborted ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:5. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted pass0 at ata0 bus 0 target 1 lun 0 pass0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 pass0: 33.000MB/s transfers pass1 at ata2 bus 0 target 0 lun 0 pass1: <HL-DT-ST RW/DVD GCC-4240N D110> Removable CD-ROM SCSI-0 device=20 pass1: 33.000MB/s transfers GEOM: new disk cd0 GEOM: new disk cd1 (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 target 1 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd1:ata2:0:0:0): error 6 (cd1:ata2:0:0:0): Unretryable Error cd1 at ata2 bus 0 target 0 lun 0 cd1: <HL-DT-ST RW/DVD GCC-4240N D110> Removable CD-ROM SCSI-0 device=20 cd1: 33.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present (cd1:ata2:0:0:0): error 6 (cd1:ata2:0:0:0): Unretryable Error (cd1:ata2:0:0:0): error 6 (cd1:ata2:0:0:0): Unretryable Error (cd1:ata2:0:0:0): error 6 (cd1:ata2:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init linprocfs registered --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.7" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-STABLE #8 r199250: Fri Nov 13 07:50:14 PST 2009 root@g1-108.catwhisker.org:/common/S2/obj/usr/src/sys/CANARY i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f44000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0f4414c. Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0f441f8. Preloaded elf module "/boot/kernel/iwi_bss.ko" at 0xc0f442a4. Preloaded elf module "/boot/kernel/iwi_ibss.ko" at 0xc0f44350. Preloaded elf module "/boot/kernel/iwi_monitor.ko" at 0xc0f44400. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f444b0. Calibrating clock(s) ... i8254 clock: 1193175 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2392950328 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz (2392.95-MHz 686-class CP= U) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x400<CNXT-ID> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte = line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte lin= e size real memory =3D 2147360768 (2047 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000007db8cfff, 2092335104 bytes (510824 pages) avail memory =3D 2091491328 (1994 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_bu= ffersize=3D16384 feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_= round=3D25 firmware: 'iwi_bss' version 300: 191142 bytes loaded at 0xc0e48000 firmware: 'iwi_ibss' version 300: 185660 bytes loaded at 0xc0e7973c firmware: 'iwi_monitor' version 300: 187836 bytes loaded at 0xc0ea9000 wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Nov 13 2009 07:49:= 43) ACPI: RSDP @ 0x0xfde50/0x0014 (v 0 DELL ) ACPI: RSDT @ 0x0xfde64/0x002C (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) ACPI: FACP @ 0x0xfde90/0x0074 (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) ACPI: DSDT @ 0x0xfffe4000/0x314E (v 1 INT430 SYSFexxx 0x00001001 MSFT 0x01= 00000E) ACPI: FACS @ 0x0x7ffff800/0x0040 ACPI: BOOT @ 0x0xfdf04/0x0028 (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: wakeup code va 0xc50a1000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIRQ -> bus 0 dev 31 func 0 acpi0: reservation of 0, 9fc00 (3) failed acpi0: reservation of 100000, 7fef0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 Validation 0 11 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 11 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x04 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 26, ena= bled found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x04 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=3D0x8086, dev=3D0x2484, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x2487, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base 0xbfa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled map[14]: type I/O Port, range 32, base 0xdc40, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd400, size 8, enabled map[14]: type I/O Port, range 32, base 0xd080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x4c66, revid=3D0x01 domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x01a7, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, ena= bled pcib1: requested memory range 0xe0000000-0xe7ffffff: good map[14]: type I/O Port, range 32, base 0xc000, size 8, enabled pcib1: requested I/O range 0xc000-0xc0ff: in range map[18]: type Memory, range 32, base 0xfcff0000, size 16, enabled pcib1: requested memory range 0xfcff0000-0xfcffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe0000000-0xe7fff= fff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xbf40-0xbf5f i= rq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f i= rq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.1.INTA at func 0: 255 ACPI: Found matching pin for 2.1.INTA at func 1: 255 ACPI: Found matching pin for 2.1.INTA at func 2: 11 ACPI: Found matching pin for 2.3.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x78 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec80, size 7, enabled pcib2: requested I/O range 0xec80-0xecff: in range map[14]: type Memory, range 32, base 0xf8fffc00, size 7, enabled pcib2: requested memory range 0xf8fffc00-0xf8fffc7f: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0x8027, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D2 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8fff000, size 11, enabled pcib2: requested memory range 0xf8fff000-0xf8fff7ff: good map[14]: type Memory, range 32, base 0xf8ff8000, size 14, enabled pcib2: requested memory range 0xf8ff8000-0xf8ffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x4220, revid=3D0x05 domain=3D0, bus=3D2, slot=3D3, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0016, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8ffe000, size 12, enabled pcib2: requested memory range 0xf8ffe000-0xf8ffefff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x1011, dev=3D0x0022, revid=3D0x04 domain=3D0, bus=3D2, slot=3D12, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x02 (500 ns) powerspec 1 supports D0 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0= xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:08:74:e9:c9:41 xl0: [MPSAFE] xl0: [ITHREAD] cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0xf4000000-0xfbffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0xf4000000 0x020000a0 0x20040302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: cbb1 requested memory range 0xf4000000-0xfbffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: [ITHREAD] cbb1: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0xf4001000 0x020000a0 0x20060502 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 fwohci0: <Texas Instruments PCI4451> mem 0xf8fff000-0xf8fff7ff,0xf8ff8000-0= xf8ffbfff irq 11 at device 1.2 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8fff000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 42:4f:c0:00:07:2c:30:41 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:2c:30:41 fwe0: bpf attached fwe0: Ethernet address: 42:4f:c0:2c:30:41 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 42:4f:c0:00:07:2c:30:41 @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xc9e940 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xf8ffe000-0xf8ffefff irq 11 at de= vice 3.0 on pci2 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8ffe000 iwi0: bpf attached iwi0: Ethernet address: 00:0e:35:aa:11:ca iwi0: bpf attached iwi0: bpf attached iwi0: [MPSAFE] iwi0: [ITHREAD] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci2 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xffff pcib3: memory decode 0xfa000000-0xfbffffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x9<ATAPI_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D3f ostat1=3D3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat1=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: reset tp2 stat0=3Dbf stat1=3Dbf devices=3D0x0 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc40-0xdc7f irq 9 at devi= ce 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc40 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Cirrus Logic CS4205 AC97 Codec (id =3D 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bi= t DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic,= AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: sndbuf_setmap 130c000, 4000; 0xe57dc000 -> 130c000 pcm0: sndbuf_setmap 1310000, 4000; 0xe57e0000 -> 1310000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 speaker0: <PC speaker> port 0x61,0x63,0x65,0x67 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] sio0: irq maps: 0x201 0x211 0x201 0x201 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A, console sio0: [FILTER] cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) pcf0 failed to probe on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 134101 -> 100000 procfs registered Timecounter "TSC" frequency 2392950328 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forward= ing enabled, default to deny, logging unlimited DUMMYNET with IPv6 initialized (040826) lo0: bpf attached hptrr: no controller detected. firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery0: battery initialization done, tried 1 times battery1: battery initialization start battery1: battery initialization done, tried 1 times ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire ad0: setting PIO4 on ICH3 chip ad0: setting UDMA100 on ICH3 chip ad0: 114473MB <FUJITSU MHV2120AH 000000A0> at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on ICH3 chip fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout acd0: setting UDMA33 on ICH3 chip acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4241N/A100> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pcm0: measured ac97 link rate at 47999 Hz, will use 48000 Hz acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0? (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 (probe0:ata0:0:1:0): CAM Status: SCSI Status Error (probe0:ata0:0:1:0): SCSI Status: Check Condition (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present (probe0:ata0:0:1:0): (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0= =20 (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present Unretryable error (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error pass0 at ata0 bus 0 target 1 lun 0 pass0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 pass0: 33.000MB/s transfers (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 target 1 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present GEOM: new disk cd0 scsi_cd.c::ioctl cmd=3D4400648b error=3D25 (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.8" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-PRERELEASE #970 r199220: Thu Nov 12 17:19:10 PST 2009 root@d254.dwolf.juniper.net.:/common/S3/obj/usr/src/sys/CANARY i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc1008000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc100814c. Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc10081f8. Preloaded elf module "/boot/kernel/iwi_bss.ko" at 0xc10082a4. Preloaded elf module "/boot/kernel/iwi_ibss.ko" at 0xc1008350. Preloaded elf module "/boot/kernel/iwi_monitor.ko" at 0xc1008400. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2392950092 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz (2392.95-MHz 686-class CP= U) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x400<CNXT-ID> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte = line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte lin= e size real memory =3D 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x000000007db8cfff, 2088136704 bytes (509799 pages) avail memory =3D 2086809600 (1990 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: ULE: setup cpu 0 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_ra= te_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 wlan: <802.11 Link Layer> firmware: 'iwi_bss' version 300: 191154 bytes loaded at 0xc0f77000 firmware: 'iwi_ibss' version 300: 185428 bytes loaded at 0xc0fa8764 firmware: 'iwi_monitor' version 300: 187836 bytes loaded at 0xc0fd8000 null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI: RSDP 0xfde50 00014 (v0 DELL ) ACPI: RSDT 0xfde64 0002C (v1 DELL CPi R 27D40107 ASL 00000061) ACPI: FACP 0xfde90 00074 (v1 DELL CPi R 27D40107 ASL 00000061) ACPI: DSDT 0xfffe4000 0314E (v1 INT430 SYSFexxx 00001001 MSFT 0100000E) ACPI: FACS 0x7ffff800 00040 ACPI: BOOT 0xfdf04 00028 (v1 DELL CPi R 27D40107 ASL 00000061) npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: wakeup code va 0xc54c1000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIRQ -> bus 0 dev 31 func 0 acpi0: reservation of 0, 9fc00 (3) failed acpi0: reservation of 100000, 7fef0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 Validation 0 11 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 11 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x04 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 26, ena= bled found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x04 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=3D0x8086, dev=3D0x2484, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x2487, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base 0xbfa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled map[14]: type I/O Port, range 32, base 0xdc40, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd400, size 8, enabled map[14]: type I/O Port, range 32, base 0xd080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x4c66, revid=3D0x01 domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x01a7, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, ena= bled pcib1: requested memory range 0xe0000000-0xe7ffffff: good map[14]: type I/O Port, range 32, base 0xc000, size 8, enabled pcib1: requested I/O range 0xc000-0xc0ff: in range map[18]: type Memory, range 32, base 0xfcff0000, size 16, enabled pcib1: requested memory range 0xfcff0000-0xfcffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe0000000-0xe7fff= fff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xbf40-0xbf5f i= rq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f i= rq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.1.INTA at func 0: 255 ACPI: Found matching pin for 2.1.INTA at func 1: 255 ACPI: Found matching pin for 2.1.INTA at func 2: 11 ACPI: Found matching pin for 2.3.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x78 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec80, size 7, enabled pcib2: requested I/O range 0xec80-0xecff: in range map[14]: type Memory, range 32, base 0xf8fffc00, size 7, enabled pcib2: requested memory range 0xf8fffc00-0xf8fffc7f: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0x8027, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D2 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8fff000, size 11, enabled pcib2: requested memory range 0xf8fff000-0xf8fff7ff: good map[14]: type Memory, range 32, base 0xf8ff8000, size 14, enabled pcib2: requested memory range 0xf8ff8000-0xf8ffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x4220, revid=3D0x05 domain=3D0, bus=3D2, slot=3D3, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0016, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8ffe000, size 12, enabled pcib2: requested memory range 0xf8ffe000-0xf8ffefff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x1011, dev=3D0x0022, revid=3D0x04 domain=3D0, bus=3D2, slot=3D12, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x02 (500 ns) powerspec 1 supports D0 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0= xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:08:74:e9:c9:41 xl0: [MPSAFE] xl0: [ITHREAD] cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0x80000000 0x020000a0 0x20040302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: cbb1 requested memory range 0x0-0xffffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: [FILTER] cbb1: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0x80001000 0x020000a0 0x20060502 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 fwohci0: <Texas Instruments PCI4451> mem 0xf8fff000-0xf8fff7ff,0xf8ff8000-0= xf8ffbfff irq 11 at device 1.2 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8fff000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 42:4f:c0:00:07:2c:30:41 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xd50260 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:2c:30:41 fwe0: bpf attached fwe0: Ethernet address: 42:4f:c0:2c:30:41 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 42:4f:c0:00:07:2c:30:41 @ 0xfffe00000000, S400, ma= xrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, CYCLEMAS= TER mode iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xf8ffe000-0xf8ffefff irq 11 at de= vice 3.0 on pci2 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8ffe000 iwi0: [MPSAFE] iwi0: [ITHREAD] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci2 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xffff pcib3: memory decode 0xfa000000-0xfbffffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x20001 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D3f ostat1=3D3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat1=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: reset tp2 stat0=3Dbf stat1=3Dbf devices=3D0x0 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc40-0xdc7f irq 9 at devi= ce 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc40 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Cirrus Logic CS4205 AC97 Codec (id =3D 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bi= t DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic,= AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: sndbuf_setmap 17c0000, 4000; 0xe5ced000 -> 17c0000 pcm0: sndbuf_setmap 17c4000, 4000; 0xe5cf1000 -> 17c4000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart0: fast interrupt uart0: console (9600,n,8,1) ppc0: using extended I/O port range ppc0: SPP ECP ECP+EPP ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 pcf0 failed to probe on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 133845 -> 100000 procfs registered Timecounter "TSC" frequency 2392950092 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forward= ing enabled, default to deny, logging firewire0: 1 nodes, maxhop <=3D 0 cab= le IRM irm(0) (me)=20 firewire0: bus manager 0=20 disabled lo0: bpf attached DUMMYNET with IPv6 initialized (040826) hptrr: no controller detected. ata0: Identifying devices: 00020001 ata0: New devices: 00020001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery0: battery initialization done, tried 1 times battery1: battery initialization start battery1: battery initialization done, tried 1 times ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire ad0: setting PIO4 on ICH3 chip ad0: setting UDMA100 on ICH3 chip ad0: 114473MB <FUJITSU MHV2120AH 000000A0> at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on ICH3 chip acd0: setting UDMA33 on ICH3 chip acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4241N/A100> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 pcm0: measured ac97 link rate at 48010 Hz, will use 48000 Hz acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0? (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 (probe0:ata0:0:1:0): CAM Status: SCSI Status Error (probe0:ata0:0:1:0): SCSI Status: Check Condition (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present (probe0:ata0:0:1:0): (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0= =20 (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present Unretryable error (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error pass0 at ata0 bus 0 target 1 lun 0 pass0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 pass0: 33.000MB/s transfers (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 target 1 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout GEOM: new disk cd0 GEOM: ad0s1: geometry does not match label (15h,63s !=3D 16h,63s). GEOM: ad0s2: geometry does not match label (15h,63s !=3D 16h,63s). GEOM: ad0s3: geometry does not match label (15h,63s !=3D 16h,63s). GEOM: ad0s4: geometry does not match label (15h,63s !=3D 16h,63s). (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s3a ct_to_ts([2009-11-14 03:36:35]) =3D 1258169795.000000000 start_init: trying /sbin/init linprocfs registered --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.9" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #1176 r199250: Fri Nov 13 11:06:42 PST 2009 root@d254.dwolf.juniper.net.:/common/S4/obj/usr/src/sys/CANARY i386 WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. MEMGUARD DEBUGGING ALLOCATOR INITIALIZED: MEMGUARD map base: 0xc5800000 MEMGUARD map limit: 0xc7801000 MEMGUARD map size: 33558528 (Bytes) Preloaded elf kernel "/boot/kernel/kernel" at 0xc1282000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc128214c. Preloaded elf module "/boot/kernel/if_an.ko" at 0xc12821f8. Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc12822a4. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc1282350. Preloaded elf module "/boot/kernel/iwi_bss.ko" at 0xc12823fc. Preloaded elf module "/boot/kernel/iwi_ibss.ko" at 0xc12824a8. Preloaded elf module "/boot/kernel/iwi_monitor.ko" at 0xc1282558. Preloaded elf module "/boot/kernel/radeon.ko" at 0xc1282608. Preloaded elf module "/boot/kernel/drm.ko" at 0xc12826b4. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2392950792 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz (2392.95-MHz 686-class CP= U) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x400<CNXT-ID> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte = line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte lin= e size real memory =3D 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x000000007db8cfff, 2088136704 bytes (509799 pages) avail memory =3D 2086383616 (1989 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: WARNING: VIMAGE (virtualized network stack) is a highly experimental featur= e. ULE: setup cpu 0 wlan: <802.11 Link Layer> firmware: 'iwi_bss' version 300: 191154 bytes loaded at 0xc116d000 firmware: 'iwi_ibss' version 300: 185428 bytes loaded at 0xc119e764 firmware: 'iwi_monitor' version 300: 187836 bytes loaded at 0xc11ce000 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_ra= te_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 kbd: new array size 4 kbd1 at kbdmux0 nfslock: pseudo-device mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> io: <I/O> random: <entropy source, Software, Yarrow> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI: RSDP 0xfde50 00014 (v0 DELL ) ACPI: RSDT 0xfde64 0002C (v1 DELL CPi R 27D40107 ASL 00000061) ACPI: FACP 0xfde90 00074 (v1 DELL CPi R 27D40107 ASL 00000061) ACPI: DSDT 0xfffe4000 0314E (v1 INT430 SYSFexxx 00001001 MSFT 0100000E) ACPI: FACS 0x7ffff800 00040 ACPI: BOOT 0xfdf04 00028 (v1 DELL CPi R 27D40107 ASL 00000061) npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: wakeup code va 0xc54c1000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIRQ -> bus 0 dev 31 func 0 acpi0: reservation of 0, 9fc00 (3) failed acpi0: reservation of 100000, 7fef0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 Validation 0 11 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 11 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x04 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 26, ena= bled found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x04 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=3D0x8086, dev=3D0x2484, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x2487, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base 0xbfa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled map[14]: type I/O Port, range 32, base 0xdc40, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd400, size 8, enabled map[14]: type I/O Port, range 32, base 0xd080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x4c66, revid=3D0x01 domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x01a7, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, ena= bled pcib1: requested memory range 0xe0000000-0xe7ffffff: good map[14]: type I/O Port, range 32, base 0xc000, size 8, enabled pcib1: requested I/O range 0xc000-0xc0ff: in range map[18]: type Memory, range 32, base 0xfcff0000, size 16, enabled pcib1: requested memory range 0xfcff0000-0xfcffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe0000000-0xe7fff= fff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1 drm0: <ATI Radeon Lf RV250 Mobility 9000 M9 / FireMV 2400 PCI> on vgapci0 vgapci0: Reserved 0x10000 bytes for rid 0x18 type 3 at 0xfcff0000 vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xe8000000 64MB info: [drm] Initialized radeon 1.31.0 20080613 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xbf40-0xbf5f i= rq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f i= rq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.1.INTA at func 0: 255 ACPI: Found matching pin for 2.1.INTA at func 1: 255 ACPI: Found matching pin for 2.1.INTA at func 2: 11 ACPI: Found matching pin for 2.3.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x78 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec80, size 7, enabled pcib2: requested I/O range 0xec80-0xecff: in range map[14]: type Memory, range 32, base 0xf8fffc00, size 7, enabled pcib2: requested memory range 0xf8fffc00-0xf8fffc7f: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0x8027, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D2 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8fff000, size 11, enabled pcib2: requested memory range 0xf8fff000-0xf8fff7ff: good map[14]: type Memory, range 32, base 0xf8ff8000, size 14, enabled pcib2: requested memory range 0xf8ff8000-0xf8ffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x8086, dev=3D0x4220, revid=3D0x05 domain=3D0, bus=3D2, slot=3D3, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0016, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf8ffe000, size 12, enabled pcib2: requested memory range 0xf8ffe000-0xf8ffefff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x1011, dev=3D0x0022, revid=3D0x04 domain=3D0, bus=3D2, slot=3D12, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x02 (500 ns) powerspec 1 supports D0 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0= xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:08:74:e9:c9:41 xl0: [MPSAFE] xl0: [ITHREAD] cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 cbb0: Found memory at 80000000 cbb0: Secondary bus is 4 cbb0: Setting primary bus to 2 cbb0: Secondary bus set to 3 subbus 4 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0x80000000 0x020000a0 0x20040302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: cbb1 requested memory range 0x0-0xffffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80001000 cbb1: Found memory at 80001000 cbb1: Secondary bus is 5 cbb1: Setting primary bus to 2 cbb1: Secondary bus set to 5 subbus 6 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: [FILTER] cbb1: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0x80001000 0x020000a0 0x20060502 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 fwohci0: <Texas Instruments PCI4451> mem 0xf8fff000-0xf8fff7ff,0xf8ff8000-0= xf8ffbfff irq 11 at device 1.2 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8fff000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 42:4f:c0:00:07:2c:30:41 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:2c:30:41 fwe0: bpf attached fwe0: Ethernet address: 42:4f:c0:2c:30:41 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 42:4f:c0:00:07:2c:30:41 @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xdb8520 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, CYCLEMAS= TER mode iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xf8ffe000-0xf8ffefff irq 11 at de= vice 3.0 on pci2 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8ffe000 iwi0: [MPSAFE] iwi0: [ITHREAD] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci2 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xffff pcib3: memory decode 0xfa000000-0xfbffffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x20001 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D3f ostat1=3D3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat0=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: stat1=3D0x3f err=3D0x3f lsb=3D0x3f msb=3D0x3f ata1: reset tp2 stat0=3Dbf stat1=3Dbf devices=3D0x0 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc40-0xdc7f irq 9 at devi= ce 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc40 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Cirrus Logic CS4205 AC97 Codec (id =3D 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bi= t DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic,= AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: sndbuf_setmap 1714000, 4000; 0xe5c63000 -> 1714000 pcm0: sndbuf_setmap 1718000, 4000; 0xe5c67000 -> 1718000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) Calling int 0x15 (ax=3D0xc000 bx=3D0x0000 cx=3D0x0000 dx=3D0x0000 es=3D0x00= 00 di=3D0x0000) Exiting int 0x15 (ax=3D0x0000 bx=3D0xe6f5 cx=3D0x0000 dx=3D0x0000 es=3D0xf0= 00 di=3D0x0000) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart0: fast interrupt uart0: console (9600,n,8,1) ppc0: using extended I/O port range ppc0: SPP ECP ECP+EPP ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 pcf0 failed to probe on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 133845 -> 100000 procfs registered Timecounter "TSC" frequency 2392950792 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed firewire0: 1 nodes, maxhop <=3D 0 cable IRM irm(0) (me)=20 firewire0: bus manager 0=20 ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forward= ing enabled, default to deny, logging disabled lo0: bpf attached DUMMYNET with IPv6 initialized (040826) hptrr: no controller detected. ata0: Identifying devices: 00020001 ata0: New devices: 00020001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 Status is 0x30000106 Status is 0x30000006 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Expensive timeout(9) function: 0xc08a3740(0xc7a2d8c0) 0.109901956 s ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ACPI Warning for \\_SB_.BAT0._BIF: Converted Buffer to expected String at i= ndex 9 (20091013/nsrepair-282) ACPI Warning for \\_SB_.BAT0._BIF: Converted Buffer to expected String at i= ndex 10 (20091013/nsrepair-282) ACPI Warning for \\_SB_.BAT0._BIF: Converted Buffer to expected String at i= ndex 11 (20091013/nsrepair-282) ACPI Warning for \\_SB_.BAT0._BIF: Converted Buffer to expected String at i= ndex 12 (20091013/nsrepair-282) battery0: battery initialization done, tried 1 times battery1: battery initialization start ACPI Warning for \\_SB_.BAT1._BIF: Converted Buffer to expected String at i= ndex 9 (20091013/nsrepair-282) ACPI Warning for \\_SB_.BAT1._BIF: Converted Buffer to expected String at i= ndex 10 (20091013/nsrepair-282) ACPI Warning for \\_SB_.BAT1._BIF: Converted Buffer to expected String at i= ndex 11 (20091013/nsrepair-282) ACPI Warning for \\_SB_.BAT1._BIF: Converted Buffer to expected String at i= ndex 12 (20091013/nsrepair-282) battery1: battery initialization done, tried 1 times ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire ad0: setting PIO4 on ICH3 chip ad0: setting UDMA100 on ICH3 chip ad0: 114473MB <FUJITSU MHV2120AH 000000A0> at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on ICH3 chip acd0: setting UDMA33 on ICH3 chip acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4241N/A100> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pcm0: measured ac97 link rate at 47998 Hz, will use 48000 Hz acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0? (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 (probe0:ata0:0:1:0): CAM Status: SCSI Status Error (probe0:ata0:0:1:0): SCSI Status: Check Condition (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present (probe0:ata0:0:1:0): (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0= =20 (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present Unretryable error (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error pass0 at ata0 bus 0 scbus1 target 1 lun 0 pass0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 pass0: 33.000MB/s transfers WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance.(cd0:ata0:0:= 1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 scbus1 target 1 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present GEOM: ad0s1: geometry does not match label (15h,63s !=3D 16h,63s). GEOM: ad0s2: geometry does not match label (15h,63s !=3D 16h,63s). GEOM: ad0s3: geometry does not match label (15h,63s !=3D 16h,63s). GEOM: ad0s4: geometry does not match label (15h,63s !=3D 16h,63s). GEOM: new disk cd0 (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s4a ct_to_ts([2009-11-14 03:39:38]) =3D 1258169978.000000000 start_init: trying /sbin/init lock order reversal: 1st 0xc55b4a90 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2559 2nd 0xc8530e00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:285 KDB: stack backtrace: db_trace_self_wrapper(c0c8012c,e7ead75c,c08ad035,c089dc2b,c0c830c8,...) at = 0xc04d49a6 =3D db_trace_self_wrapper+0x26 kdb_backtrace(c089dc2b,c0c830c8,c7936308,c793a268,e7ead7b8,...) at 0xc0899a= b9 =3D kdb_backtrace+0x29 _witness_debugger(c0c830c8,c8530e00,c0ca7565,c793a268,c0ca71fe,...) at 0xc0= 8ad035 =3D _witness_debugger+0x25 witness_checkorder(c8530e00,9,c0ca71fe,11d,0,...) at 0xc08ae259 =3D witness= _checkorder+0x839 _sx_xlock(c8530e00,0,c0ca71fe,11d,c8500d98,...) at 0xc0872495 =3D _sx_xlock= +0x85 ufsdirhash_acquire(c55b4a30,d9a7ecbc,144,d9a7eccc,e7ead888,...) at 0xc0adab= 45 =3D ufsdirhash_acquire+0x35 ufsdirhash_add(c8500d98,e7ead8d0,2ccc,e7ead874,e7ead878,...) at 0xc0adaff3 = =3D ufsdirhash_add+0x13 ufs_direnter(c853d860,c853d218,e7ead8d0,e7eadbd0,0,...) at 0xc0ade109 =3D u= fs_direnter+0x729 ufs_makeinode(e7eadbd0,0,e7eadabc,e7eada18,c0bcd3c5,...) at 0xc0ae3358 =3D = ufs_makeinode+0x508 ufs_create(e7eadabc,e7eadad4,0,0,e7eadba4,...) at 0xc0ae3630 =3D ufs_create= +0x30 VOP_CREATE_APV(c0d8f1c0,e7eadabc,e7eadbd0,e7eada54,0,...) at 0xc0bcd3c5 =3D= VOP_CREATE_APV+0xa5 vn_open_cred(e7eadba4,e7eadc5c,1a4,0,c79c0280,...) at 0xc09092d5 =3D vn_ope= n_cred+0x205 vn_open(e7eadba4,e7eadc5c,1a4,c84f7658,c8508af0,...) at 0xc09096bb =3D vn_o= pen+0x3b kern_openat(c8508af0,ffffff9c,48350700,0,602,...) at 0xc09074ef =3D kern_op= enat+0x11f kern_open(c8508af0,48350700,0,601,1b6,...) at 0xc0907a55 =3D kern_open+0x35 open(c8508af0,e7eadcf8,c,c0c83b24,c0d6bb0c,...) at 0xc0907a90 =3D open+0x30 syscall(e7eadd38) at 0xc0bb4d84 =3D syscall+0x2b4 Xint0x80_syscall() at 0xc0b97200 =3D Xint0x80_syscall+0x20 --- syscall (5, FreeBSD ELF32, open), eip =3D 0x4820e273, esp =3D 0xbfbfe8f= c, ebp =3D 0xbfbfe918 --- --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="pciconf.6" FreeBSD 6.4-STABLE FreeBSD 6.4-STABLE #700 r199014: Sat Nov 7 04:28:00 PST 2009 root@g1-101.catwhisker.org:/common/S1/obj/usr/src/sys/CANARY i386 agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '82845G[GL/GV/GE/PE] Host-Hub Interface Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x45418086 chip=0x24828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x45418086 chip=0x24848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x45418086 chip=0x24878086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM USB Controller' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM LPC Interface or ISA bridge: see Notes' class = bridge subclass = PCI-ISA atapci1@pci0:31:1: class=0x01018a card=0x45418086 chip=0x248a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA pcm0@pci0:31:5: class=0x040100 card=0x59591013 chip=0x24858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller' class = multimedia subclass = audio none0@pci0:31:6: class=0x070300 card=0x4c21134d chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class = simple comms subclass = generic modem none1@pci1:0:0: class=0x030000 card=0x00d51028 chip=0x4c661002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'ATI MOBILITY RADEON 9000 (Microsoft Corporation - Radeon Mobility M9' class = display subclass = VGA xl0@pci2:0:0: class=0x020000 card=0x00d51028 chip=0x920010b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C905 CX-TX-M Fast EtherLink for PC Management NIC' class = network subclass = ethernet cbb0@pci2:1:0: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI4451 PC card CardBus Controller' class = bridge subclass = PCI-CardBus cbb1@pci2:1:1: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI4451 PC card CardBus Controller' class = bridge subclass = PCI-CardBus fwohci0@pci2:1:2: class=0x0c0010 card=0x00d51028 chip=0x8027104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'PCI4451 OHCI-Lynx IEEE-1394 FireWire Adapter' class = serial bus subclass = FireWire iwi0@pci2:3:0: class=0x028000 card=0x27218086 chip=0x42208086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'MPCI3B driverIntel PRO/Wireless 2200BG' class = network pcib3@pci2:12:0: class=0x060400 card=0x00000000 chip=0x00221011 rev=0x04 hdr=0x01 vendor = 'Digital Equipment Corporation' device = '21150-AA PCI to PCI Bridge' class = bridge subclass = PCI-PCI xl1@pci3:1:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x30 hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C905-TX Fast Etherlink 10/100 PCI TX NIC' class = network subclass = ethernet dc0@pci3:2:0: class=0x020000 card=0xf0041385 chip=0x000211ad rev=0x20 hdr=0x00 vendor = 'Lite-On Communications Inc' device = 'KNE110TX Kingston EtheRx KNE110TX PCI Fast Ethernet Adapter' class = network subclass = ethernet atapci0@pci3:5:0: class=0x01018f card=0x06461095 chip=0x06461095 rev=0x07 hdr=0x00 vendor = 'Silicon Image Inc (Was: CMD Technology Inc)' device = 'PCI-0646 EIDE Adapter (Single FIFO)' class = mass storage subclass = ATA ahc0@pci3:7:0: class=0x010000 card=0x78809004 chip=0x80789004 rev=0x01 hdr=0x00 vendor = 'Adaptec Inc' device = 'AIC-7880P Ultra/Ultra Wide SCSI Chipset' class = mass storage subclass = SCSI xl2@pci3:8:0: class=0x020000 card=0x00a81028 chip=0x920010b7 rev=0x6c hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C905 CX-TX-M Fast EtherLink for PC Management NIC' class = network subclass = ethernet --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="pciconf.7" FreeBSD 7.2-STABLE FreeBSD 7.2-STABLE #8 r199250: Fri Nov 13 07:50:14 PST 2009 root@g1-108.catwhisker.org:/common/S2/obj/usr/src/sys/CANARY i386 hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Host-Hub Interface Bridge (82845G[GL/GV/GE/PE])' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0x45418086 chip=0x24828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *1' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x45418086 chip=0x24848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *2' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x45418086 chip=0x24878086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM USB Controller *3 (ICH3-S/ICH3-M)' class = serial bus subclass = USB pcib2@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'LPC Interface or ISA bridge: see Notes (82801CAM)' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x45418086 chip=0x248a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA pcm0@pci0:0:31:5: class=0x040100 card=0x59591013 chip=0x24858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller' class = multimedia subclass = audio none0@pci0:0:31:6: class=0x070300 card=0x4c21134d chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class = simple comms subclass = generic modem vgapci0@pci0:1:0:0: class=0x030000 card=0x00d51028 chip=0x4c661002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'Radeon Mobility 9000 series (ATI MOBILITY RADEON 9000 (Microsoft Corporation -)' class = display subclass = VGA xl0@pci0:2:0:0: class=0x020000 card=0x00d51028 chip=0x920010b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = 'Fast EtherLink for PC Management NIC (3C905 CX-TXM)' class = network subclass = ethernet cbb0@pci0:2:1:0: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PC card CardBus Controller (PCI4451)' class = bridge subclass = PCI-CardBus cbb1@pci0:2:1:1: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PC card CardBus Controller (PCI4451)' class = bridge subclass = PCI-CardBus fwohci0@pci0:2:1:2: class=0x0c0010 card=0x00d51028 chip=0x8027104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'PCI4451 OHCI-Lynx IEEE-1394 FireWire Adapter' class = serial bus subclass = FireWire iwi0@pci0:2:3:0: class=0x028000 card=0x27218086 chip=0x42208086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'driverIntel PRO/Wireless 2200BG (MPCI3B)' class = network pcib3@pci0:2:12:0: class=0x060400 card=0x00000000 chip=0x00221011 rev=0x04 hdr=0x01 vendor = 'Digital Equipment Corporation' device = 'PCI-PCI Bridge (DC21150-AA)' class = bridge subclass = PCI-PCI --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="pciconf.8" FreeBSD 8.0-PRERELEASE FreeBSD 8.0-PRERELEASE #970 r199220: Thu Nov 12 17:19:10 PST 2009 root@d254.dwolf.juniper.net.:/common/S3/obj/usr/src/sys/CANARY i386 hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Host-Hub Interface Bridge (82845G[GL/GV/GE/PE])' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0x45418086 chip=0x24828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *1' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x45418086 chip=0x24848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *2' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x45418086 chip=0x24878086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM USB Controller *3 (ICH3-S/ICH3-M)' class = serial bus subclass = USB pcib2@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'LPC Interface or ISA bridge: see Notes (82801CAM)' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x45418086 chip=0x248a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA pcm0@pci0:0:31:5: class=0x040100 card=0x59591013 chip=0x24858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller' class = multimedia subclass = audio none0@pci0:0:31:6: class=0x070300 card=0x4c21134d chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class = simple comms subclass = generic modem vgapci0@pci0:1:0:0: class=0x030000 card=0x00d51028 chip=0x4c661002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'Radeon Mobility 9000 series (ATI MOBILITY RADEON 9000 (Microsoft Corporation -)' class = display subclass = VGA xl0@pci0:2:0:0: class=0x020000 card=0x00d51028 chip=0x920010b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = 'Fast EtherLink for PC Management NIC (3C905 CX-TXM)' class = network subclass = ethernet cbb0@pci0:2:1:0: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PC card CardBus Controller (PCI4451)' class = bridge subclass = PCI-CardBus cbb1@pci0:2:1:1: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PC card CardBus Controller (PCI4451)' class = bridge subclass = PCI-CardBus fwohci0@pci0:2:1:2: class=0x0c0010 card=0x00d51028 chip=0x8027104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'PCI4451 OHCI-Lynx IEEE-1394 FireWire Adapter' class = serial bus subclass = FireWire iwi0@pci0:2:3:0: class=0x028000 card=0x27218086 chip=0x42208086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'driverIntel PRO/Wireless 2200BG (MPCI3B)' class = network pcib3@pci0:2:12:0: class=0x060400 card=0x00000000 chip=0x00221011 rev=0x04 hdr=0x01 vendor = 'Digital Equipment Corporation' device = 'PCI-PCI Bridge (DC21150-AA)' class = bridge subclass = PCI-PCI --yZnyZsPjQYjG7xG7 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="pciconf.9" FreeBSD 9.0-CURRENT FreeBSD 9.0-CURRENT #1176 r199250: Fri Nov 13 11:06:42 PST 2009 root@d254.dwolf.juniper.net.:/common/S4/obj/usr/src/sys/CANARY i386 hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x1a308086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Host-Hub Interface Bridge (82845G[GL/GV/GE/PE])' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086 rev=0x04 hdr=0x01 vendor = 'Intel Corporation' device = '82845/E/MP/MZ Brookdale CPU to AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0x45418086 chip=0x24828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *1' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x45418086 chip=0x24848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller *2' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x45418086 chip=0x24878086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM USB Controller *3 (ICH3-S/ICH3-M)' class = serial bus subclass = USB pcib2@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'LPC Interface or ISA bridge: see Notes (82801CAM)' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x45418086 chip=0x248a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM (ICH3-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA pcm0@pci0:0:31:5: class=0x040100 card=0x59591013 chip=0x24858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Audio Controller' class = multimedia subclass = audio none0@pci0:0:31:6: class=0x070300 card=0x4c21134d chip=0x24868086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller' class = simple comms subclass = generic modem vgapci0@pci0:1:0:0: class=0x030000 card=0x00d51028 chip=0x4c661002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'Radeon Mobility 9000 series (ATI MOBILITY RADEON 9000 (Microsoft Corporation -)' class = display subclass = VGA xl0@pci0:2:0:0: class=0x020000 card=0x00d51028 chip=0x920010b7 rev=0x78 hdr=0x00 vendor = '3COM Corp, Networking Division' device = 'Fast EtherLink for PC Management NIC (3C905 CX-TXM)' class = network subclass = ethernet cbb0@pci0:2:1:0: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PC card CardBus Controller (PCI4451)' class = bridge subclass = PCI-CardBus cbb1@pci0:2:1:1: class=0x060700 card=0x00d51028 chip=0xac42104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PC card CardBus Controller (PCI4451)' class = bridge subclass = PCI-CardBus fwohci0@pci0:2:1:2: class=0x0c0010 card=0x00d51028 chip=0x8027104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'PCI4451 OHCI-Lynx IEEE-1394 FireWire Adapter' class = serial bus subclass = FireWire iwi0@pci0:2:3:0: class=0x028000 card=0x27218086 chip=0x42208086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'driverIntel PRO/Wireless 2200BG (MPCI3B)' class = network pcib3@pci0:2:12:0: class=0x060400 card=0x00000000 chip=0x00221011 rev=0x04 hdr=0x01 vendor = 'Digital Equipment Corporation' device = 'PCI-PCI Bridge (DC21150-AA)' class = bridge subclass = PCI-PCI --yZnyZsPjQYjG7xG7-- --U3BNvdZEnlJXqmh+ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.13 (FreeBSD) iEYEARECAAYFAkr+QJYACgkQmprOCmdXAD14rwCeJktZpcQJsgS8h3OFlfGNhiKN QfYAoILGTXr9XXiNgu6RDmkQAF7EdcZA =79c+ -----END PGP SIGNATURE----- --U3BNvdZEnlJXqmh+--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091114053103.GG1649>