Date: Mon, 09 Oct 2006 16:58:18 +0800 From: Ganbold <ganbold@micom.mng.net> To: Alexander Motin <mav@mavhome.dp.ua> Cc: freebsd-net@freebsd.org Subject: Re: mpd and vlan Message-ID: <452A0F2A.3000901@micom.mng.net> In-Reply-To: <452A008B.8040804@mavhome.dp.ua> References: <1159971789.00612536.1159960802@10.7.7.3> <4524055D.7060906@mavhome.dp.ua> <4529C408.5070807@micom.mng.net> <452A008B.8040804@mavhome.dp.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Alexander, Alexander Motin wrote: > I mean something like this: > > default: > load server1 > load server2 > load server3 > .. > pppoe_standard: > set ccp yes mpp-e40 > set ccp yes mpp-e128 > set ccp yes mpp-stateless > set pppoe service "*" > set pppoe disable originate > set pppoe enable incoming > .. > server1: > new -i ng1 pppoe1 pppoe1 > set ipcp ranges x.x.x.x/32 y.y.y.y/24 > load pppoe_standard > server2: > new -i ng2 pppoe2 pppoe2 > set ipcp ranges x.x.x.x/32 y.y.y.y/24 > load pppoe_standard > server3: > new -i ng3 pppoe3 pppoe3 > set ipcp ranges x.x.x.x/32 y.y.y.y/24 > load pppoe_standard > .. > > mpd.links file: > pppoe1: > set link type pppoe > set pppoe iface vlan0 > pppoe2: > set link type pppoe > set pppoe iface vlan1 > pppoe3: > set link type pppoe > set pppoe iface vlan2 > .. > OK, so I have to create vlans first on the system and then configure mpd.links file accordingly and take out the "set pppoe iface bge1" line from mpd.conf. I will try it sometime later and let you know how it goes. thanks a lot, Ganbold
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?452A0F2A.3000901>