Date: Fri, 24 Jul 1998 09:48:50 -0300 (ADT) From: Marc Fournier <marc.fournier@acadiau.ca> To: freebsd-scsi@FreeBSD.ORG Subject: newest CAM driver... Message-ID: <Pine.GSO.3.96.980724094634.24881F-100000@iceberg>
next in thread | raw e-mail | index | archive | help
Ack... Just updated my kernel using the newest CAM drivers, and, upon reboot, got hit with, which just doesn't give a "warm fuzzy feeling". I did a 'cvs checkout' of the source tree as of July 16th, applied the diff and then did a 'cvs update -APd' to bring the source tree up to date (today, July 24th), with the only conflict being in isa_device.h ... (probe1:ahc1:0:0:3): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x18d SSTAT1 == 0xa (probe1:ahc1:0:0:3): Queuing a BDR SCB (probe1:ahc1:0:0:3): SCB 0x0 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x18d SSTAT1 == 0xa (probe1:ahc1:0:0:3): no longer in timeout, status = 34b ahc1: Issued Channel A Bus Reset. 2 SCBs aborted (probe1:ahc1:0:0:3): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x18d SSTAT1 == 0xa (probe1:ahc1:0:0:3): Queuing a BDR SCB (probe1:ahc1:0:0:3): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x18d SSTAT1 == 0xa (probe1:ahc1:0:0:3): no longer in timeout, status = 34b ahc1: Issued Channel A Bus Reset. 2 SCBs aborted cda0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM VIKING II 4.5WSE 3506> Fixed Direct Access SCSI2 device da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C) hda1 at ahc1 bus 0 target 0 lun 0 da1: <QUANTUM XP34550W LYK8> Fixed Direct Access SCSI2 device da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) da2 at ahc1 bus 0 target 1 lun 0 da2: <QUANTUM XP34550W LYK8> Fixed Direct Access SCSI2 device da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) anging root device to da0s1a (da0:ahc0:0:0:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x18d SSTAT1 == 0xa (da0:ahc0:0:0:0): Queuing a BDR SCB (da0:ahc0:0:0:0): SCB 0xe - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 SEQADDR == 0x18d SSTAT1 == 0xa (da0:ahc0:0:0:0): no longer in timeout, status = 34b Marc G. Fournier marc.fournier@acadiau.ca Systems Administrator, Acadia University "These are my opinions, which are not necessarily shared by my employer" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.3.96.980724094634.24881F-100000>