Date: Sat, 30 May 2009 23:08:04 +0300 From: =?iso-8859-9?Q?Yavuz_Ma=FElak?= <yavuz.maslak@netiletisim.net> To: <freebsd-questions@freebsd.org> Subject: about using ppp over ethernet Message-ID: <32914FF12A6A47E48839C2343FDA1AAC@desktop2002>
next in thread | raw e-mail | index | archive | help
I use freebsd7.1 I have a adsl modem. I am going to use freebsd as a router and firewall. I wish to use over pppoe. I set the adsl modem as a bridge mode. I configured ppp.conf on freebsd. When I try to connect to internet using ADSL, But I get an error as below; Freebsd can't ping at any outside ip. Therefore I am not able to reach to internet in this way. What am I doing wrong? Any advice ? Thanks May 21 17:35:54 gw110 ppp[1215]: tun0: Phase: bundle: Establish May 21 17:35:54 gw110 ppp[1215]: tun0: Phase: deflink: closed -> opening May 21 17:35:54 gw110 ppp[1215]: tun0: Phase: deflink: Connected! May 21 17:35:54 gw110 ppp[1215]: tun0: Phase: deflink: opening -> dial May 21 17:35:54 gw110 ppp[1215]: tun0: Phase: deflink: dial -> carrier May 21 17:35:55 gw110 ppp[1215]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "SE-ATAKOY-NEC-1") May 21 17:35:55 gw110 ppp[1215]: tun0: Phase: Received NGM_PPPOE_SESSIONID May 21 17:35:55 gw110 ppp[1215]: tun0: Phase: Received NGM_PPPOE_SUCCESS May 21 17:35:55 gw110 ppp[1215]: tun0: Phase: deflink: carrier -> login May 21 17:35:55 gw110 ppp[1215]: tun0: Phase: deflink: login -> lcp May 21 17:35:56 gw110 ppp[1215]: tun0: Phase: bundle: Authenticate May 21 17:35:56 gw110 ppp[1215]: tun0: Phase: deflink: his = PAP, mine = none May 21 17:35:56 gw110 ppp[1215]: tun0: Phase: Pap Output: xyza@ttnet ******** May 21 17:35:57 gw110 ppp[1215]: tun0: Phase: Pap Input: SUCCESS () May 21 17:35:57 gw110 ppp[1215]: tun0: Phase: deflink: lcp -> open May 21 17:35:57 gw110 ppp[1215]: tun0: Phase: bundle: Network May 21 17:35:57 gw110 ppp[1215]: tun0: Warning: 0.0.0.0/0: Change route failed: errno: No such process May 21 17:35:57 gw110 ppp[1215]: tun0: Warning: ff02:7::/32: Change route failed: errno: Network is unreachable cat /etc/rc.conf gw110# ifconfig xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:60:97:b8:77:eb media: Ethernet autoselect (100baseTX <full-duplex>) status: active stge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC> ether 00:22:15:10:73:04 inet 10.11.1.221 netmask 0xffffff00 broadcast 10.11.1.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 pflog0: flags=0<> metric 0 mtu 33204 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pfsync0: flags=0<> metric 0 mtu 1460 syncpeer: 224.0.0.240 maxupd: 128 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1492 inet 88.238.76.207 --> 88.238.64.1 netmask 0xffffffff Opened by PID 1215 tun1: flags=8010<POINTOPOINT,MULTICAST> metric 0 mtu 1500 gw110# ping 88.238.76.207 PING 88.238.76.207 (88.238.76.207): 56 data bytes 64 bytes from 88.238.76.207: icmp_seq=0 ttl=64 time=0.831 ms 64 bytes from 88.238.76.207: icmp_seq=1 ttl=64 time=0.222 ms 64 bytes from 88.238.76.207: icmp_seq=2 ttl=64 time=0.206 ms Bu elektronik posta ve varsa ekleri tamamen gizli ve gönderilen kişiler listesine özeldir. Eğer adınız gönderilen kişiler listesinde yer almıyorsa, lütfen derhal gönderen kişiyi bilgilendiriniz ve içeriğini herhangi başka bir kişiye iletmeyiniz, herhangi bir amaç için kullanmayınız, sayısal ve basılı ortamlar dahil olmak üzere saklamayınız ve kopyalamayınız. This e-mail and attachments, if any, may contain confidential and/or proprietary information. Please be advised that the unauthorized use or disclosure of the information is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by reply e-mail and delete all copies of this message and attachments. Thank you.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?32914FF12A6A47E48839C2343FDA1AAC>