Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 11 Apr 2006 09:15:16 -0500
From:      "Zane C.B." <zanecb@midwest-connections.com>
To:        freebsd-net@freebsd.org, hellbinder@gazeta.pl
Subject:   Re: inter pro wireless problems
Message-ID:  <20060411091516.6d489ea9@zerda>
In-Reply-To: <14002189.19331144748304428.JavaMail.webadm@ew11>
References:  <14002189.19331144748304428.JavaMail.webadm@ew11>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 11 Apr 2006 11:38:24 +0200 (CEST)
<hellbinder@gazeta.pl> wrote:

> I have a problem setting up Intel PRO / Wireless 2200BG on Asus
> A3500N machine running FreeBSD 6.0. I tried to follow instructions
> at http://damien.bergamini.free.fr/ipw/ipw-freebsd.html but they are
> ok up till some point. I've installed iwi-firmware as needed and
> dmesg shows right wireless adapted at booting. 
> First problem: No iwicontrol installed and I can't find anywhere.
> But the interface is up anyway.
> Second problem: sysctl dev.iwi.0.radio shown my card is running but
> the led on the computer is not on - so is it really on? I guess yes
> if ifconfig iwi0 returns:
> iwi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>         inet6 fe80::212:f0ff:fe86:724c%iwi0 prefixlen 64 scopeid 0x2
>         inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
>         ether 00:12:f0:86:72:4c
>         media: IEEE 802.11 Wireless Ethernet autoselect
>         status: no carrier
>         ssid mcstudio channel 1
>         authmode OPEN privacy ON deftxkey UNDEF txpowmax 100
> protmode CTS
> Final problem when I tried to connect to AP by:
>  ifconfig iwi0 ssid mcstudio wepkey 0x6f73696f6c wepmode on
> I received:
> ifconfig: SIOCS80211: Invalid argument
> 
> What's that how to solve these problems??

iwicontrol is provided by the net/iwi-firmware port. Just install it
and put iwi_enable="YES" in rc.conf. I would honestly suggest running
with iwiNG and the iwi-firmware-kmod port though. You can find iwiNG on
the list here recently. I've had a problem with data corruption with
current iwi driver on releng_6. I've also had problems with the device
becoming unresponsive after a scan is done. IwiNG fixed both problems.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060411091516.6d489ea9>