Date: Sat, 11 Mar 2000 00:02:27 +0100 From: Hans Ottevanger <hansot@iae.nl> To: Soren Schmidt <sos@freebsd.dk> Cc: current@FreeBSD.ORG Subject: Re: RC3 install floppies: panic: resource_list_alloc: resource entry is busy Message-ID: <38C97F03.733B1AA0@iae.nl> References: <200003100804.JAA99578@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------660E6D1FF97F825A67EFD117
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Soren Schmidt wrote:
>
[...]
> Hmm, seems to be a resource conflict problem, question is what is
> causing this. Could you do a verbose boot both with the old
> working kernel, and the new failing one ?
>
Attached are two files. Both kernels used are built from the same config
file, which is mostly GENERIC with devices removed that I do not have.
The file "new" results from booting a kernel built completely from
sources cvsupped yesterday. For "old" I replaced the contents of
/sys/dev/ata by the files of February 17, i.e. before the major changes.
I must remark that this is one of the machines that reports its IDE IRQ
as 0 when asked for it. About two months ago there were problems when
the ata driver took the timer interrupt. This was fixed by a special
clause in ata-all.c, at least up to February 17. Maybe the current
problem is related.
> > This machine has an Intel motherboard with a Mercury chipset, 64 Mbyte
> > RAM, Matrox Millenium II, two Western Digital disks, and it ran all
> > previous FreeBSD releases perfectly for almost five years.
>
> Yeah I notice the RZ 1000 chips in there, BE CAREFULL, I wouldn't
> use this for anything I cared about...
For serious work I now have two BP6 based machines, this became just a
testmachine. I know about the possible data corruption problems with
RZ1000 chips, but I have never seen them with FreeBSD, despite the fact
that I did a "make world" every other week for more than two years.
However, if you run Linux or Solaris on this machine, and forget to
switch off the EIDE prefetch buffers, the results can be quite
dramatic...
Kind regards,
Hans
--------------660E6D1FF97F825A67EFD117
Content-Type: text/plain; charset=us-ascii;
name="new"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="new"
SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
SMAP type=01 base=00000000 00100000 len=00000000 03f00000
SMAP type=02 base=00000000 fffc0000 len=00000000 00040000
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Fri Mar 10 21:43:07 CET 2000
root@myhost.my.domain:/usr/src/sys/compile/CUSTOM
Calibrating clock(s) ... TSC clock: 66643091 Hz, i8254 clock: 1300543 Hz
1300543 Hz differs from default of 1193182 Hz by more than 1%
Timecounter "i8254" frequency 1193182 Hz
TSC clock: 48650664 Hz (Method B)
Timecounter "TSC" frequency 48650664 Hz
CPU: Pentium/P5 (48.65-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x517 Stepping = 7
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002d1000 - 0x03ff7fff, 64122880 bytes (15655 pages)
avail memory = 62267392 (60808K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0120
bios32: Entry = 0xf145c (c00f145c) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1440
pnpbios: Found PnP BIOS data at 0xc00f0130
pnpbios: Entry = f0000:1245 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc02b8000.
Intel Pentium detected, installing workaround for F00F bug
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x00000000 (0xff000001)
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 54761513 bytes/sec
bzero() bandwidth = 27416038 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x00000000 (0xff000001)
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x04a3, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1042, dev=0x1000, revid=0x01
class=01-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
found-> vendor=0x8086, dev=0x0484, revid=0x03
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x102b, dev=0x051b, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base a0000000, size 24
map[14]: type 1, range 32, base a1000000, size 14
map[18]: type 1, range 32, base a1800000, size 23
found-> vendor=0x10b7, dev=0x9200, revid=0x74
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000fc80, size 7
map[14]: type 1, range 32, base ffbffc00, size 7
pci0: <PCI bus> on pcib0
CPU: Pentium, 66MHz, CPU->Memory posting ON, read around write
Warning: Cache parity disabled!
Warning: DRAM parity mask!
Cache: 256KB writeback, cache clocks=3-2-2-2/4-2-2-2
Cache flags: cache-all byte-control
DRAM: page mode memory clocks=X-4-4-4 (70ns)
CPU->PCI: posting ON, burst mode ON, PCI clocks=2-1-1-1
PCI->Memory: posting ON
Refresh: RAS#Only BurstOf4
atapci0: <RZ 100? ATA controller !WARNING! buggy chip data loss possible> port 0x3f4-0x3f7,0x1f0-0x1f7 at device 1.0 on pci0
atapci0: Busmastering DMA not supported
panic: resource_list_alloc: resource entry is busy
Debugger("panic")
Stopped at Debugger+0x35: movb $0,in_Debugger.372
db>
--------------660E6D1FF97F825A67EFD117
Content-Type: text/plain; charset=us-ascii;
name="old"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="old"
SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
SMAP type=01 base=00000000 00100000 len=00000000 03f00000
SMAP type=02 base=00000000 fffc0000 len=00000000 00040000
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Fri Mar 10 22:57:58 CET 2000
root@myhost.my.domain:/home/src/sys/compile/CUSTOM
Calibrating clock(s) ... TSC clock: 66643293 Hz, i8254 clock: 1193159 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 66643293 Hz
CPU: Pentium/P5 (66.64-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x517 Stepping = 7
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002cf000 - 0x03ff7fff, 64131072 bytes (15657 pages)
avail memory = 62275584 (60816K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0120
bios32: Entry = 0xf145c (c00f145c) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1440
pnpbios: Found PnP BIOS data at 0xc00f0130
pnpbios: Entry = f0000:1245 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Intel Pentium detected, installing workaround for F00F bug
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x00000000 (0xff000001)
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 75058170 bytes/sec
bzero() bandwidth = 37572797 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x00000000 (0xff000001)
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x04a3, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1042, dev=0x1000, revid=0x01
class=01-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
found-> vendor=0x8086, dev=0x0484, revid=0x03
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x102b, dev=0x051b, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base a0000000, size 24
map[14]: type 1, range 32, base a1000000, size 14
map[18]: type 1, range 32, base a1800000, size 23
found-> vendor=0x10b7, dev=0x9200, revid=0x74
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000fc80, size 7
map[14]: type 1, range 32, base ffbffc00, size 7
pci0: <PCI bus> on pcib0
CPU: Pentium, 66MHz, CPU->Memory posting ON, read around write
Warning: Cache parity disabled!
Warning: DRAM parity mask!
Cache: 256KB writeback, cache clocks=3-2-2-2/4-2-2-2
Cache flags: cache-all byte-control
DRAM: page mode memory clocks=X-4-4-4 (70ns)
CPU->PCI: posting ON, burst mode ON, PCI clocks=2-1-1-1
PCI->Memory: posting ON
Refresh: RAS#Only BurstOf4
ata-pci0: <Unknown PCI ATA controller (generic mode)> port 0x3f4-0x3f7,0x1f0-0x1f7 at device 1.0 on pci0
ata-pci0: Busmastering DMA not supported
ata0: iobase=0x01f0 altiobase=0x03f4 bmaddr=0x0000
ata0: mask=03 status0=50 status1=50
ata0: mask=03 status0=50 status1=50
ata0: devices = 0x3
ata0 at 0x01f0 irq 14 on ata-pci0
isab0: <Intel 82378ZB PCI to ISA bridge> at device 2.0 on pci0
Bus Modes: Bus Park, Resource Lock,
Coprocessor errors enabled
Keyboard controller: 60h,62h,64h,66h
RTC: 70h-77h
Port 92: enabled
isa0: <ISA bus> on isab0
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> (vendor=0x102b, dev=0x051b) at 12.0 irq 11
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xfc80-0xfcff mem 0xffbffc00-0xffbffc7f irq 10 at device 14.0 on pci0
xl0: Ethernet address: 00:50:04:d8:b3:c4
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
Trying Read_Port at 203
Trying Read_Port at 243
CTL0001: start dependant
CTL0001: adding irq mask 0x20
CTL0001: adding dma mask 0x2
CTL0001: adding dma mask 0x20
CTL0001: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0001: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0001: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0001: start dependant
CTL0001: adding irq mask 0x6a0
CTL0001: adding dma mask 0xa
CTL0001: adding dma mask 0xa0
CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0001: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0001: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0001: start dependant
CTL0001: adding irq mask 0x6a0
CTL0001: adding dma mask 0xa
CTL0001: adding dma mask 0xa0
CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0001: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0001: start dependant
CTL0001: adding irq mask 0x6a0
CTL0001: adding dma mask 0xa
CTL0001: adding dma mask 0xa0
CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0001: start dependant
CTL0001: adding irq mask 0x6a0
CTL0001: adding dma mask 0xa
CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0001: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0001: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0001: start dependant
CTL0001: adding irq mask 0x6a0
CTL0001: adding dma mask 0xa
CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0001: end dependant
CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata-isa0: already registered as ata0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata1: mask=01 status0=00 status1=ff
ata1: mask=01 status0=00 status1=ffffffff
ata1: devices = 0x4
ata1 at port 0x170 irq 15 on isa0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 05 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 flags 0x30 on isa0
sio1: type 16550A, console
ppc0: parallel port found at 0x378
ppc0: ECP SPP ECP+EPP SPP
ppc_detect_fifo: PWord not supported
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
unknown1: <Game> at port 0x200-0x207 on isa0
BIOS Geometries:
0:03fe0f3f 0..1022=1023 cylinders, 0..15=16 heads, 1..63=63 sectors
1:03fe0f3f 0..1022=1023 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: <WDC AC31600H/17.11P19> ATA-0 disk at ata0 as master
ad0: 1549MB (3173184 sectors), 3148 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, BIOSPIO
ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad0
Creating DISK wd0
ad1: <WDC AC33100H/10.07H09> ATA-0 disk at ata0 as slave
ad1: 3020MB (6185088 sectors), 6136 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, BIOSPIO
ad1: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad1
Creating DISK wd1
ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
acd0: <TOSHIBA CD-ROM XM-5602B/1156> CDROM drive at ata1 as master
acd0: read 1377KB/s (1377KB/s), 256KB buffer, BIOSPIO
acd0: Reads: CD-R, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:wd1s1a
wd1s1: type 0xa5, start 63, end = 6185087, size 6185025 : OK
start_init: trying /sbin/init
--------------660E6D1FF97F825A67EFD117--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38C97F03.733B1AA0>