Date: Fri, 21 Nov 1997 13:12:44 -0500 (EST) From: Dylan Northrup <northrup@ucet.ufl.edu> To: freebsd-questions@freebsd.org Subject: ccd question Message-ID: <Pine.A41.3.96.971121131105.26094D-100000@ronell.ucet.ufl.edu>
next in thread | raw e-mail | index | archive | help
I've asked this question on comp.unix.bsd.freebsd.misc, but repost it here in the hope of increasing my chances of getting an answer. Does anyone have instructions for setting up a couple of drives to work as one ccd? I've been mucking around with it for a bit, but seem to not quite have everything down. Here's the steps I went through... sh MAKEDEV ccd0 # Everything worked fine here and the dev files were # created disklabel -er /dev/sd1s1 # Had to change the disklabel from unused to disklabel -er /dev/sd2s1 # 4.2BSD ccdconfig -cv ccd0 0 none /dev/sd1s1 /dev/sd2s1 Here's where I'm stuck. I've been told that I need to newfs the ccd0. Through trial and error I've found that /dev/ccd0c seems to be the device I want to work on (if you can tell me an automated way to know which device is the right one to work with, I'd appreciate that too). Doing a 'newfs /dev/ccd0c' tells me that ccd0c is not a character-special device, the device is not configured and that can't read the disk label; disk type must be specified. I can't disklabel /dev/ccd0c (or any other ccd0 devices) because it says the device is not configured. Are there any instructions that will give me a direction to follow from here? -- Dylan Northrup <*> northrup@nwe.ufl.edu <*> http://web.nwe.ufl.edu/~northrup <*> --------------- Random B5 Quote "So, I ask myself 'Now who on the station could pull together the ingredients of bagna cauda so far from Earth?' You qualifications precede you, Mr. Orwell." -- Dr. Franklin to Mr. Orwell and Mr. Garibaldi, "A Distant Star"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.A41.3.96.971121131105.26094D-100000>