Date: Thu, 6 Apr 2000 01:49:58 +0800 From: "Alex Kwan" <alexkwan@pacific.net.hk> To: <freebsd-mobile@FreeBSD.ORG> Subject: Fw: How to config PCMCIA Atapi Cdrom Drive and PCMCIA Atapi Zip Drive Message-ID: <001001bf9f27$5ce33bc0$291e40ca@alexkwan>
next in thread | raw e-mail | index | archive | help
----- Original Message ----- From: Alex Kwan <alexkwan@pacific.net.hk> To: Warner Losh <imp@village.org> Sent: Thursday, April 06, 2000 1:48 AM Subject: Re: How to config PCMCIA Atapi Cdrom Drive and PCMCIA Atapi Zip Drive > Hi! Warner, > > (1) CDROM: > I already have a internal CDROM (but it is too slowly), > device is acd0a and acd0c (why one CDROM have two device a and c?), > do I need create acd1a and acd1c manually? > > (2) ZIP Drive > I have create a entry on pccard.conf by myself as follow > (you have told me how to do that before), > card "Iomega" "PCMCIA to 16 bit ATAPI Adapter" > config 0x1 "ata2" ? > insert logger -t pccard: $device -s Iomega Zip 250MB inserted > remove logger -t pccard: $device -s Iomega Zip 250MB removed > > it was detected by pccardd and the ata2 was up, but I got following error > message: > 'ata2 - slave : ata2_command: timeout waiting fot intr.' > 'ata2 - slave : ata2 identify failed' > 'ata2 - master: <IOMEGA ZIP250 ATAPI/31.G>floppy device - No Driver' > > my drive was detected but no driver, how can I do next step? > > Thanks a lot! > > > > > > Use pccard dumpcis to find out the mfg and "version" strings for the > > card and then put pccard.conf. And send them to me so I can add them > > to pccard.conf.sample. The device you want to deal with in > > pccard.conf is ata since that's the controller. Other devices will > > attach to that. > > > > : Do I need waiting for the PAO4.0 ? > > > > There will be no PAO 4. > > > > : because I read their documents said that the above drive are supported > > : by PAO3.3, device are acd and wfd0. > > > > Snag the entry from PAO3's pccard.conf, hack on it to make FreeBSD 4's > > pccardd happy and you should be set. > > > > Warner > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001001bf9f27$5ce33bc0$291e40ca>