Date: Thu, 19 Jul 2007 19:42:05 GMT From: Christopher Davis <loafier@FreeBSD.org> To: Perforce Change Reviews <perforce@FreeBSD.org> Subject: PERFORCE change 123747 for review Message-ID: <200707191942.l6JJg5iP036428@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=123747 Change 123747 by loafier@chrisdsoc on 2007/07/19 19:41:04 Integrate Affected files ... .. //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/articles/contributing/article.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/faq/book.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/handbook/desktop/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/handbook/install/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/handbook/l10n/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/arch-handbook/driverbasics/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/faq/book.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/kernelconfig/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/ports/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/porters-handbook/book.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/fr_FR.ISO8859-1/books/handbook/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/fr_FR.ISO8859-1/books/handbook/install/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/fr_FR.ISO8859-1/books/handbook/kernelconfig/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/books/handbook/desktop/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/books/handbook/geom/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/books/handbook/install/chapter.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/man-refs.ent#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/mirrors.xml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/doc/zh_TW.Big5/share/sgml/mailing-lists.ent#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/MOVED#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.database.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.emacs.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.kde.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.port.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.qt.mk#1 branch .. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.ruby.mk#2 integrate .. //depot/projects/soc2007/loafier_busalloc/ports/UPDATING#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/ObsoleteFiles.inc#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/FREEBSD-Xlist#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/Makefile.am#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/bootstrap#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/doc/Makefile.am#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/doc/diagmeet.note#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/exgettext#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/Makefile.am#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/alloca.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/alloca_.h#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/dirname.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/fnmatch.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/fnmatch_.h#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/fnmatch_loop.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/getopt.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/getopt1.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/getopt_int.h#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/gettimeofday.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/imaxtostr.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/inttostr.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/malloc.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/mkstemp.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/offtostr.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/realloc.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/regex.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/regex.h#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/setmode.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/stdbool_.h#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/strcasecmp.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/stripslash.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/strncasecmp.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/strtol.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/strtoll.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/strtoul.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/strtoull.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/tempname.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/time_r.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/time_r.h#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/umaxtostr.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/waitpid.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/xstrdup.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/xstrtol.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/xstrtoul.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/lib/xstrtoumax.c#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/man/Makefile.am#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/contrib/diff/src/Makefile.am#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/etc/mtree/BSD.include.dist#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/etc/mtree/BSD.usr.dist#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/include/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_entry.3#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_entry.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_entry.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_read_support_format_tar.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_read_support_format_zip.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_string.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_string_sprintf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_write_disk.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/main.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test_read_format_gtar_sparse.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test_tar_filenames.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test_write_disk_perms.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/lib/libc/sys/ioctl.2#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/libexec/rtld-elf/powerpc/reloc.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/relnotes/article.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/rescue/rescue/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sbin/atm/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/examples/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man4/ipmi.4#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man5/src.conf.5#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man7/ports.7#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man9/contigmalloc.9#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/share/man/man9/module.9#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/amd64/amd64/cpu_switch.S#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/NOTES#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/files#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/options#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_common.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_ctl_defs.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_mc5.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_t3_cpl.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_t3_hw.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_vsc7323.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_xgmac.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_adapter.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_ioctl.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_main.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_offload.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_offload.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_osdep.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_sge.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/sys/mvec.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/t3b_protocol_sram-1.1.0.bin.gz.uu#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/t3b_tp_eeprom-1.1.0.bin.gz.uu#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/t3fw-4.1.0.bin.gz.uu#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/t3fw-4.5.0.bin.gz.uu#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/firewire/firewire.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/firewire/firewirereg.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/ipmi/ipmi_isa.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mxge/eth_z8e.dat.gz.uu#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mxge/eth_z8e.h#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mxge/ethp_z8e.dat.gz.uu#2 delete .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mxge/ethp_z8e.h#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mxge/if_mxge.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mxge/mxge_eth_z8e.c#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mxge/mxge_ethp_z8e.c#1 branch .. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/usb/if_ural.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/fs/tmpfs/tmpfs_vnops.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/gnu/fs/ext2fs/ext2_vfsops.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/i386/i386/genassym.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/i386/i386/swtch.s#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/ia64/ia64/syscall.S#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_event.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_mutex.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_resource.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_sig.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_switch.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/sched_4bsd.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/sched_ule.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/vfs_mount.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/cxgb/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/mxge/mxge_eth_z8e/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/mxge/mxge_ethp_z8e/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/netgraph/atm/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netatm/atm_proto.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_asconf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_cc_functions.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_constants.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_indata.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_input.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_os_bsd.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_output.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_pcb.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_pcb.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_peeloff.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_structs.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_timer.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_usrreq.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_var.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctputil.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctputil.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet6/in6.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet6/sctp6_usrreq.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netipsec/ipsec_input.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netipsec/ipsec_output.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/netipsec/xform_ipip.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/sparc64/sparc64/pmap.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/mutex.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_page.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_phys.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_phys.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_zeroidle.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/tools/build/options/WITHOUT_TOOLCHAIN#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/tools/regression/fstest/fstest.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/tools/regression/fstest/tests/open/16.t#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/tools/regression/fstest/tests/open/18.t#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/kdump/mkioctls#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/atalk.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/bpf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/if.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/inet.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/inet6.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/ipsec.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/ipx.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/main.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/mbuf.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/mcast.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/mroute.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/mroute6.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/netgraph.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/netstat.h#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/pfkey.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/route.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/sctp.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.bin/netstat/unix.c#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/Makefile#2 integrate .. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/wpa/wpa_passphrase/wpa_passphrase.8#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/de/docs/books.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/de/share/sgml/press.xml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/de/where.sgml#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/en/cgi/getmsg.cgi#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/en/cgi/man.cgi#2 integrate .. //depot/projects/soc2007/loafier_busalloc/www/en/internal/machines.sgml#2 integrate Differences ... ==== //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/articles/contributing/article.sgml#2 (text+ko) ==== @@ -2,8 +2,8 @@ The FreeBSD Documentation Project The FreeBSD German Documentation Project - $FreeBSD: doc/de_DE.ISO8859-1/articles/contributing/article.sgml,v 1.3 2005/10/08 15:30:39 jkois Exp $ - $FreeBSDde: de-docproj/articles/contributing/article.sgml,v 1.3 2005/10/08 14:56:56 jkois Exp $ + $FreeBSD: doc/de_DE.ISO8859-1/articles/contributing/article.sgml,v 1.4 2007/07/18 06:28:01 jkois Exp $ + $FreeBSDde: de-docproj/articles/contributing/article.sgml,v 1.4 2007/07/16 06:25:27 jkois Exp $ basiert auf: 1.506 --> @@ -17,7 +17,7 @@ <articleinfo> <title>&os; unterstützen</title> - <pubdate>$FreeBSD: doc/de_DE.ISO8859-1/articles/contributing/article.sgml,v 1.3 2005/10/08 15:30:39 jkois Exp $</pubdate> + <pubdate>$FreeBSD: doc/de_DE.ISO8859-1/articles/contributing/article.sgml,v 1.4 2007/07/18 06:28:01 jkois Exp $</pubdate> <abstract> <para>Dieser Artikel beschreibt, wie Einzelpersonen oder @@ -281,7 +281,7 @@ <para>Wenn Sie einen Fehler gefunden oder eine Verbesserung entwickelt haben, vergessen Sie nicht, einen Bericht über &man.send-pr.1; oder dessen <ulink - url="&url.base;/send-pr.html">Internetschnittstelle</ulink> + url="&url.base;/de/send-pr.html">Internetschnittstelle</ulink> zu erstellen. Versuchen Sie bitte, jedes Feld auszufüllen. Ist Ihr Patch kleiner als 65 KB, sollten Sie ihn direkt in den Bericht einbauen. Kann der Patch direkt auf den Quellcodebaum ==== //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/faq/book.sgml#2 (text+ko) ==== @@ -2,10 +2,10 @@ The FreeBSD Documentation Project The FreeBSD German Documentation Project -$FreeBSD: doc/de_DE.ISO8859-1/books/faq/book.sgml,v 1.75 2007/07/10 18:38:25 jkois Exp $ -$FreeBSDde: de-docproj/books/faq/book.sgml,v 1.597 2007/07/09 18:45:12 jkois Exp $ +$FreeBSD: doc/de_DE.ISO8859-1/books/faq/book.sgml,v 1.76 2007/07/18 06:28:01 jkois Exp $ +$FreeBSDde: de-docproj/books/faq/book.sgml,v 1.598 2007/07/18 06:08:25 jkois Exp $ - basiert auf: 1.799 + basiert auf: 1.802 --> @@ -18,10 +18,10 @@ <book id="faq" lang="de"> <bookinfo> <title>Häufig gestellte Fragen zu FreeBSD - 4.X, 5.X und 6.X</title> + 5.X und 6.X</title> - <subtitle>Frequently Asked Questions für FreeBSD - 4.X, 5.X und 6.X</subtitle> + <subtitle>Frequently Asked Questions zu FreeBSD + 5.X und 6.X</subtitle> <authorgroup> <corpauthor>The FreeBSD German Documentation @@ -33,7 +33,7 @@ </collab> </authorgroup> - <pubdate>$FreeBSDde: de-docproj/books/faq/book.sgml,v 1.597 2007/07/09 18:45:12 jkois Exp $</pubdate> + <pubdate>$FreeBSDde: de-docproj/books/faq/book.sgml,v 1.598 2007/07/18 06:08:25 jkois Exp $</pubdate> <copyright> <year>1995</year> @@ -113,28 +113,29 @@ <abstract> <para>Dies ist die FAQ für die FreeBSD-Versionen - 4.X, 5.X und 6.X. Alle Einträge sollten für FreeBSD - ab Version 4.0 relevant sein, andernfalls wird darauf explizit + 5.X und 6.X. Alle Einträge sollten für FreeBSD + ab Version 5.0 relevant sein, andernfalls wird darauf explizit hingewiesen. Falls Sie daran - interessiert sein sollten, an diesem Projekt mitzuhelfen, + interessiert sein sollten, an diesem Projekt mitzuarbeiten, senden Sie eine Mail an die Mailingliste &a.de.translators;. Die aktuelle Version dieses Dokuments ist ständig auf dem <ulink url="http://www.FreeBSD.org/">FreeBSD - World-Wide-Web-Server</ulink> verfügbar. Es kann auch - per HTTP als eine große <ulink - url="book.html">HTML</ulink>-Datei heruntergeladen werden oder - als Textdatei, im &postscript;, PDF- und anderen Formaten vom - <ulink url="ftp://ftp.de.FreeBSD.org/pub/FreeBSD/doc/">FreeBSD - FTP-Server</ulink>. Sie können die FAQ auch - <ulink url="&url.base;/search/search.html"> - durchsuchen</ulink>.</para> + World-Wide-Web-Server</ulink> verfügbar. Sie kann aber auch + als eine einzige große <ulink + url="book.html">HTML</ulink>-Datei, als Textdatei, als + &postscript;- oder PDF-Datei sowie in verschiedenen anderen + Formaten vom <ulink + url="ftp://ftp.de.FreeBSD.org/pub/FreeBSD/doc/">FreeBSD + FTP-Server</ulink> heruntergeladen werden. Alternativ können + Sie die FAQ auch <ulink + url="&url.base;/search/search.html"> durchsuchen</ulink>.</para> </abstract> </bookinfo> <chapter id="introduction"> <title>Einleitung</title> - <para>Willkommen zur FreeBSD 4.X-6.X FAQ!</para> + <para>Willkommen zur FreeBSD 5.X-6.X FAQ!</para> <para>Wie auch bei den Usenet FAQs üblich, wird mit diesem Dokument beabsichtigt, die am häufigsten gestellten Fragen @@ -1302,17 +1303,13 @@ </question> <answer> - <para>Für 4.X werden zwei Floppy-Images benötigt: - <filename>floppies/kernel.flp</filename> und - <filename>floppies/mfsroot.flp</filename>. Diese Images + <para>Sie benötigen drei Floppy-Images: + <filename>floppies/boot.flp</filename>, + <filename>floppies/kern1.flp</filename> sowie + <filename>floppies/kern2.flp</filename>. Diese Images müssen mit Hilfe von Werkzeugen wie <command>fdimage</command> oder &man.dd.1; auf Disketten - kopiert werden. Seit &os; 5.3 weisen die Bootdisketten - eine neue Struktur auf. Sie benötigen nun das Image - <filename>floppies/boot.flp</filename> sowie alle Dateien - mit den Namen - <filename>floppies/kern<replaceable>X</replaceable></filename> - (von denen es derzeit zwei gibt).</para> + kopiert werden.</para> <para>Falls Sie selbst die einzelnen Distributionen herunterladen müssen (um z.B. von einem @@ -1321,7 +1318,7 @@ <itemizedlist> <listitem> - <para>base/ (bin/ unter 4.X)</para> + <para>base/</para> </listitem> <listitem> @@ -1428,20 +1425,12 @@ </question> <answer> - <para>Für &os;-Versionen vor 5.X benötigen Sie - mindestens einen 386er Prozessor mit mindestens 5 MB - Hauptspeicher und mindestens 60 MB Festplattenspeicher. - Für die Installation von &os; ist dabei mehr - Hauptspeicher als für den eigentlichen Betrieb - nötig, daher sollten 16 RAM als Minimum für - ein Standardsystem ausreichen.</para> - <para>Der Betrieb von &os; 5.X und neuer erfordert mindestens einen 486er Prozessor mit mindestens 24 MB RAM sowie mindestens 150 MB an Festplattenspeicher.</para> <para>Alle &os;-Versionen laufen mit einer einfachen - MDA-Grafikkarte, für X11R6 benötigen Sie allerdings + MDA-Grafikkarte, für &xorg; benötigen Sie allerdings eine VGA- oder eine bessere Videokarte.</para> <para>Lesen Sie auch den <link linkend="hardware">Abschnitt @@ -1450,37 +1439,6 @@ </qandaentry> <qandaentry> - <question id="four-meg-ram-install"> - <para>Ich besitze nur 4 MB Hauptspeicher. Kann ich FreeBSD - installieren?</para> - </question> - - <answer> - <para>Für die Installation von FreeBSD 4.X - benötigen Sie mindestens 5MB RAM, seit &os; 5.X - mindestens 8 MB für die Installation eines neuen - Systems.</para> - - <para>Alle FreeBSD-Versionen vor 5.X - <emphasis>laufen</emphasis> zwar mit 4MB Hauptspeicher, - lediglich ihr Installationsprogramm läuft nicht mit 4MB. - Wenn Sie möchten, können Sie für den - Installationsvorgang zusätzlichen Hauptspeicher - hinzufügen, den Sie nach der Installation wieder - entfernen. Alternativ können Sie Ihre Platte in ein - System mit genügend Hauptspeicher transferieren und die - Platte nach erfolgreicher Installation wieder in Ihr System - einbauen.</para> - - <para>Wenn Sie nur über 4 MB Hauptspeicher - verfügen, müssen Sie einen angepassten Kernel - erzeugen. Irgend jemand hat es sogar geschafft, mit 2 MB - RAM zu booten, allerdings war dieses System nahezu - unbrauchbar.</para> - </answer> - </qandaentry> - - <qandaentry> <question id="custom-boot-floppy"> <para>Wie kann ich eine angepasste Installationsdiskette erstellen?</para> @@ -2118,14 +2076,9 @@ Kernels bei fast jeder Installation von FreeBSD erforderlich, aber neuere Ausgaben haben von der Einführung weitaus benutzerfreundlicherer - Kernelkonfigurationswerkzeuge profitiert. Unter 4.X - und älter geben Sie am FreeBSD Boot-Prompt - (boot:) <option>-c</option> ein, um in ein visuelles - Konfigurationsmenü zu gelangen. Dieses - Programm ermöglicht Ihnen die Konfiguration der - Kerneleinstellungen für die gebräuchlichsten - ISA-Karten. Ab &os; 5.X wurde dieses Konzept durch - die deutlich flexibleren <quote>hints</quote> ersetzt, + Kernelkonfigurationswerkzeuge profitiert. Seit &os; 5.X + erfolgt die Kernelkonfiguration in der Regel durch die + die deutlich flexibleren <quote>hints</quote>, die am Loader-Prompt eingegeben werden können.</para> <para>Es kann dennoch sinnvoll sein, einen neuen Kernel @@ -2504,12 +2457,6 @@ sich, SMP in der Voreinstellung zu deaktivieren, bis diese Probleme behoben sind. Dies ist eine der vordringlichen Aufgaben für &os; 5.4.</para> - - <para>Unter &os; 4.X ist SMP im Standardkernel nicht - aktiviert. Sie müssen daher einen neuen Kernel - mit SMP-Unterstützung bauen. Die dazu nötigen - Optionen entnehmen Sie bitte der Datei - <filename>/sys/i386/conf/LINT</filename>.</para> </answer> </qandaentry> </qandaset> @@ -2527,7 +2474,8 @@ </question> <answer> - <para>FreeBSD unterstützt EIDE- und SCSI-Laufwerke (mit + <para>FreeBSD unterstützt EIDE-, SATA-, SCSI- und + SAS-Laufwerke (mit kompatiblen Controllern - siehe folgenden Abschnitt), sowie alle Laufwerke, die die original <quote>Western Digital</quote>-Schnittstelle (MFM, RLL, ESDI und @@ -2540,7 +2488,7 @@ <qandaentry> <question id="supported-scsi-controllers"> - <para>Welche SCSI-Controller werden + <para>Welche SCSI- oder SAS-Controller werden unterstützt?</para> </question> ==== //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/handbook/desktop/chapter.sgml#2 (text+ko) ==== @@ -2,9 +2,9 @@ The FreeBSD Documentation Project The FreeBSD German Documentation Project - $FreeBSD: doc/de_DE.ISO8859-1/books/handbook/desktop/chapter.sgml,v 1.29 2007/07/10 18:38:26 jkois Exp $ - $FreeBSDde: de-docproj/books/handbook/desktop/chapter.sgml,v 1.59 2007/07/09 12:49:51 jkois Exp $ - basiert auf: 1.72 + $FreeBSD: doc/de_DE.ISO8859-1/books/handbook/desktop/chapter.sgml,v 1.30 2007/07/18 06:28:02 jkois Exp $ + $FreeBSDde: de-docproj/books/handbook/desktop/chapter.sgml,v 1.60 2007/07/16 05:54:00 jkois Exp $ + basiert auf: 1.73 --> <chapter id="desktop"> @@ -194,16 +194,19 @@ entspricht dem HTML-Standard und verfügt über einen E-Mail-Client und einen Newsreader. Für den Fall, dass Sie einige HTML-Seiten selbst verfassen wollen, enthält der - Browser auch einen HTML-Editor. Benutzern von - <application>&netscape;</application> wird die Ähnlichkeit mit - dem <application>Communicator</application> auffallen, die von der - gemeinsamen Grundlage stammt.</para> + Browser auch einen HTML-Editor. Wenn Sie + <application>&netscape;</application> kennen, wird Ihnen + vielleicht die Ähnlichkeit mit dem + <application>Communicator</application> auffallen. Dies liegt + daran, dass die beiden Programme eine gemeinsame + Entwicklungsgeschichte haben (und auf der gleichen + ursprünglichen Codebasis aufbauen).</para> <para>Auf langsamen Maschinen, deren CPU-Taktfrequenz weniger als 233 MHz beträgt, oder die weniger als 64 MB Speicher besitzen, können Sie <application>Mozilla</application> wegen - des Ressourcenbedarfs nur eingeschränkt benutzen. Weniger - Ressourcen verbraucht der <application>Opera</application> Browser, + dessen Ressourcenbedarfs nur eingeschränkt benutzen. Weniger + Ressourcen verbraucht der <application>Opera</application>-Browser, der gleich in diesem Kapitel behandelt wird.</para> <para>Für den Fall, dass Sie <application>Mozilla</application> @@ -415,17 +418,19 @@ wenn der Port <filename role="package">x11/kdebase3</filename> installiert ist. <application>Konqueror</application> ist mehr als nur ein Browser. Sie können das - Programm ebenfalls zur Dateiverwaltung und zum Abspielen + Programm weiters zur Dateiverwaltung und zum Abspielen von Multimedia-Dateien benutzen.</para> <para>Der Port <filename role="package">misc/konq-plugins</filename> - enthält Plugins für + installiert verschiedene Plugins für <application>Konqueror</application>.</para> <para><application>Konqueror</application> kann - <application>&flash;</application>-Seiten darstellen, siehe - die Beschreibung unter - <ulink url="http://freebsd.kde.org/howto.php"></ulink>.</para> + <application>&flash;</application>-Seiten darstellen. Wie Sie + die <application>&flash;</application>-Unterstützung + aktiviern, können Sie unter + <ulink url="http://freebsd.kde.org/howto.php"></ulink> + nachlesen.</para> </sect2> </sect1> @@ -435,11 +440,11 @@ <para>Neue Benutzer suchen oft ein komplettes Office-Paket oder eine leicht zu bedienende Textverarbeitung. Einige <link linkend="x11-wm">Benutzeroberflächen</link> - wie <application>KDE</application> bieten schon ein Office-Paket, - aber unter FreeBSD ist keine derartige Anwendung vorinstalliert. - Unabhängig von der verwendeten Benutzeroberfläche, stellt - Ihnen FreeBSD die benötigten Programme zur - Verfügung.</para> + wie <application>KDE</application> enthalten zwar ein Office-Paket, + diese werden in der Standardeinstellung unter FreeBSD aber nicht + installiert. Unabhängig von der verwendeten + Benutzeroberfläche können Sie diverse Office-Pakete aber + jederzeit über die Ports-Sammlung installlieren.</para> <para>Dieser Abschnitt behandelt die nachstehenden Anwendungen:</para> @@ -610,8 +615,8 @@ <secondary><application>OpenOffice.org</application></secondary> </indexterm> - <para><application>OpenOffice.org</application> enthält alles - was von einem Office-Paket erwartet wird: Textverarbeitung, + <para><application>OpenOffice.org</application> enthält alles, + was von einem Office-Paket erwartet wird: Textverarbeitung, Tabellenkalkulation, Präsentation und ein Zeichenprogramm. Die Bedienung gleicht anderen Office-Paketen und das Programm kann zahlreiche Dateiformate importieren und exportieren. Es gibt @@ -697,10 +702,11 @@ <sect1 id="desktop-viewers"> <title>Anzeigen von Dokumenten</title> - <para>Einige neue Dokumentformate, die sich großer Beliebtheit - erfreuen, können Sie sich mit dem Basissystem nicht ansehen. + <para>Einige neuere Dokumentformate, die sich aktuell großer + Beliebtheit erfreuen, können Sie sich mit den im Basissystem + enthaltenen Programmen und Werkzeugen nicht ansehen. Dieser Abschnitt behandelt Programme, mit denen Sie sich Dokumente in - unterschiedlichen Formaten ansehen können.</para> + unterschiedlichsten Formaten ansehen können.</para> <para>Die nachstehenden Anwendungen werden behandelt:</para> @@ -798,11 +804,11 @@ <!-- It is fast and its interface is clean. --> <!-- Welches Interface? API, Bedienung? --> In <application>gv</application> können Sie viele Operationen - durchführen: Sie können die Ausrichtung + durchführen: Sie können die Ausrichtung und die Papiergröße eines Dokuments ändern, - das Dokument skalieren oder glätten - (<foreignphrase>Anti-Aliasing</foreignphrase>). Fast jede - Operation kann sowohl mit der Tastatur als auch der Maus + das Dokument skalieren oder die Kantenglättung + (<foreignphrase>Anti-Aliasing</foreignphrase>) aktivieren. Fast + jede Operation kann sowohl mit der Tastatur als auch mit der Maus durchgeführt werden.</para> <para>Installieren Sie das <application>gv</application>-Paket wie @@ -886,8 +892,9 @@ <para>Wenn Sie, warum auch immer, Ihre Finanzen mit einem FreeBSD Arbeitsplatz verwalten wollen, stehen Ihnen verschiedene Anwendungen zur Verfügung. Einige von ihnen unterstützen verbreitete - Formate, wie die von <application><trademark class="registered">Quicken</trademark></application> - oder <application>Excel</application> verwendeten.</para> + Formate, darunter Dateiformate, die von + <application><trademark class="registered">Quicken</trademark></application> + oder <application>Excel</application> verwendet werden.</para> <para>Dieser Abschnitt behandelt die folgenden Anwendungen:</para> ==== //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/handbook/install/chapter.sgml#2 (text+ko) ==== @@ -1,9 +1,9 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/de_DE.ISO8859-1/books/handbook/install/chapter.sgml,v 1.18 2007/07/10 18:38:26 jkois Exp $ - $FreeBSDde: de-docproj/books/handbook/install/chapter.sgml,v 1.55 2007/07/10 07:57:24 jkois Exp $ - basiert auf: 1.358 + $FreeBSD: doc/de_DE.ISO8859-1/books/handbook/install/chapter.sgml,v 1.19 2007/07/18 06:28:02 jkois Exp $ + $FreeBSDde: de-docproj/books/handbook/install/chapter.sgml,v 1.57 2007/07/16 17:48:34 jkois Exp $ + basiert auf: 1.360 --> <chapter id="install"> @@ -4877,12 +4877,12 @@ Sie zunächst einige Disketten vorbereiten.</para> <para>Sie müssen mindestens den Inhalt des Verzeichnisses - <filename class="directory">bin</filename> auf - 1.44 MB oder 1.2 MB Disketten kopieren. + <filename class="directory">base</filename> auf + 1.44 MB Disketten kopieren. Wenn Sie die Disketten unter &ms-dos; erstellen, <emphasis>müssen</emphasis> Sie die Disketten mit dem DOS-Kommando - <command>format</command> formatieren. Unter &windows; + <command>FORMAT</command> formatieren. Unter &windows; können Sie Disketten mithilfe des Explorers formatieren (klicken Sie mit der rechten Maustaste auf das <devicename>A:</devicename>-Laufwerk und wählen @@ -4905,11 +4905,6 @@ &prompt.root; <userinput>bsdlabel -w fd0.1440 floppy3</userinput> &prompt.root; <userinput>newfs -t 2 -u 18 -l 1 -i 65536 /dev/fd0</userinput></screen> - <note> - <para>Für 5.25" 1.2 MB Disketten benutzen - Sie das Gerät <devicename>fd0.1200</devicename>.</para> - </note> - <para>Anschließend können Sie die Disketten wie ein normales Dateisystem einhängen und beschreiben.</para> @@ -4922,8 +4917,17 @@ Disketten, wobei Sie so viele Dateien wie möglich auf eine Diskette kopieren. Jede Distribution wird auf der Diskette in einem eigenen Verzeichnis abgelegt, - beispielsweise <filename>a:\bin\bin.aa</filename>, - <filename>a:\bin\bin.ab</filename>.</para> + beispielsweise <filename>a:\base\base.aa</filename>, + <filename>a:\base\base.ab</filename> und so weiter.</para> + + <important> + <para>Die Datei <filename>base.inf</filename> muss + unbedingt auf die erste Diskette des + <filename>base</filename>-Diskettensatzes kopiert werden, + damit das Installationsprogramm feststellen kann, wie viele + Disketten geladen werden müssen, um die Distribution + wieder zusammenzusetzen.</para> + </important> <para>Im Installationsprozess wählen Sie als Installationsmedium <guimenuitem>Floppy</guimenuitem> ==== //depot/projects/soc2007/loafier_busalloc/doc/de_DE.ISO8859-1/books/handbook/l10n/chapter.sgml#2 (text+ko) ==== @@ -2,8 +2,8 @@ The FreeBSD Documentation Project The FreeBSD German Documentation Project - $FreeBSD: doc/de_DE.ISO8859-1/books/handbook/l10n/chapter.sgml,v 1.34 2007/06/05 08:59:21 jkois Exp $ - $FreeBSDde: de-docproj/books/handbook/l10n/chapter.sgml,v 1.56 2007/05/29 19:24:38 jkois Exp $ + $FreeBSD: doc/de_DE.ISO8859-1/books/handbook/l10n/chapter.sgml,v 1.35 2007/07/18 06:28:02 jkois Exp $ + $FreeBSDde: de-docproj/books/handbook/l10n/chapter.sgml,v 1.57 2007/07/16 06:46:45 jkois Exp $ basiert auf: 1.124 --> @@ -207,7 +207,7 @@ nachträglich konfigurieren muss. Um es möglich zu machen, Wide- oder Multibyte-Zeichen einzugeben und zu verarbeiten, unterstützt die <ulink - url="&url.base;/ports/index.html">FreeBSD-Ports-Sammlung</ulink> + url="&url.base;/de/ports/index.html">FreeBSD-Ports-Sammlung</ulink> verschiedene Sprachen für diverse Programme. Bitte konsultieren Sie die I18N-Dokumentation des entsprechenden FreeBSD-Ports.</para> @@ -1018,7 +1018,7 @@ <para>Teile von FreeBSD wurden in andere Sprachen übersetzt. Folgen Sie bitte den Links auf der <ulink - url="&url.base;/">FreeBSD-Webseite</ulink> oder + url="&url.base;/de/">FreeBSD-Webseite</ulink> oder schauen Sie in <filename>/usr/share/doc</filename> nach.</para> </sect2> </sect1> ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#2 (text+ko) ==== @@ -1,4 +1,4 @@ -<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.716 2007/07/09 22:06:11 lme Exp $ --> +<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.717 2007/07/17 08:57:24 chinsan Exp $ --> <!-- NOTE TO COMMITTERS: Contributors lists are sorted in alphabetical order by first name. @@ -9812,6 +9812,11 @@ </listitem> <listitem> + <para>Yi-Feng Tzeng + <email>yftzeng@gmail.com</email></para> + </listitem> + + <listitem> <para>Ying-Chieh Chen <email>yinjieh@csie.nctu.edu.tw</email></para> </listitem> ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/arch-handbook/driverbasics/chapter.sgml#2 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/arch-handbook/driverbasics/chapter.sgml,v 1.36 2006/04/15 20:00:35 maxim Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/arch-handbook/driverbasics/chapter.sgml,v 1.37 2007/07/16 13:55:59 chinsan Exp $ --> <chapter id="driverbasics"> @@ -120,7 +120,7 @@ uprintf("Skeleton KLD unloaded.\n"); break; default: - err = EINVAL; + err = EOPNOTSUPP; break; } return(err); @@ -299,7 +299,7 @@ printf("Echo device unloaded.\n"); break; default: - err = EINVAL; + err = EOPNOTSUPP; break; } return(err); @@ -455,7 +455,7 @@ printf("Echo device unloaded.\n"); break; default: - err = EINVAL; + err = EOPNOTSUPP; break; } return(err); ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/faq/book.sgml#2 (text+ko) ==== @@ -6,11 +6,11 @@ <book> <bookinfo> - <title>Frequently Asked Questions for FreeBSD 4.X, 5.X, and 6.X</title> + <title>Frequently Asked Questions for FreeBSD 5.X and 6.X</title> <corpauthor>The FreeBSD Documentation Project</corpauthor> - <pubdate>$FreeBSD: doc/en_US.ISO8859-1/books/faq/book.sgml,v 1.799 2007/07/08 09:46:14 chinsan Exp $</pubdate> + <pubdate>$FreeBSD: doc/en_US.ISO8859-1/books/faq/book.sgml,v 1.802 2007/07/17 18:04:02 chinsan Exp $</pubdate> <copyright> <year>1995</year> @@ -56,8 +56,8 @@ </legalnotice> <abstract> - <para>This is the FAQ for FreeBSD versions 4.X, 5.X, and 6.X. - All entries are assumed to be relevant to FreeBSD 4.0 and + <para>This is the FAQ for FreeBSD versions 5.X and 6.X. + All entries are assumed to be relevant to FreeBSD 5.X and later, unless otherwise noted. If you are interested in helping with this project, send email to the &a.doc;. The latest version of this document is always available from the @@ -76,7 +76,7 @@ <chapter id="introduction"> <title>Introduction</title> - <para>Welcome to the FreeBSD 4.X-6.X FAQ!</para> + <para>Welcome to the FreeBSD 5.X-6.X FAQ!</para> <para>As is usual with Usenet FAQs, this document aims to cover the most frequently asked questions concerning the FreeBSD operating @@ -1140,15 +1140,12 @@ </question> <answer> - <para>For 4.X you need two floppy images: - <filename>floppies/kernel.flp</filename> and - <filename>floppies/mfsroot.flp</filename>. These images need to + <para>You need three floppy images: + <filename>floppies/boot.flp</filename>, + <filename>floppies/kern1.flp</filename>, and + <filename>floppies/kern2.flp</filename>. These images need to be copied onto floppies by tools like - <command>fdimage</command> or &man.dd.1;. - In &os; 5.3 and later, the boot floppies have been restructured - and you need <filename>floppies/boot.flp</filename> and - all the <filename>floppies/kern<replaceable>X</replaceable></filename> - files (of which there are currently two).</para> + <command>fdimage</command> or &man.dd.1;.</para> <para>If you need to download the distributions yourself (for a DOS filesystem install, for instance), below are some @@ -1157,7 +1154,7 @@ <itemizedlist> <listitem> - <para>base/ (bin/ in 4.X)</para> + <para>base/</para> </listitem> <listitem> @@ -1255,19 +1252,12 @@ </question> <answer> - <para>For versions prior to 5.X, you will need a 386 or better - PC, with 5 MB or more of RAM - and at least 60 MB of hard disk space. The &os; - installation process requires somewhat more memory so in - practice, 16 MB of RAM is a minimum requirement for a - standalone &os; system.</para> - <para>For &os; 5.X and later you will need a 486 or better PC, with 24 MB or more of RAM and at least 150 MB of hard disk space.</para> <para>All versions of &os; can run with a low - end MDA graphics card but to run X11R6, a VGA or better video + end MDA graphics card but to run &xorg;, a VGA or better video card is needed.</para> <para>See also <xref linkend="hardware">.</para> @@ -1276,30 +1266,6 @@ </qandaentry> <qandaentry> - <question id="four-meg-ram-install"> - <para>I have only 4 MB of RAM. Can I install FreeBSD?</para> - </question> - - <answer> - <para>Installing &os; 4.X requires at least 5MB RAM, and - installing &os; 5.X and later requires at least - 8MB.</para> - - <para>All versions of FreeBSD prior to 5.X will - <emphasis>run</emphasis> in 4MB of RAM, they just cannot - run the installation program in 4MB. You can add extra - memory for the install process, and then revert to 4MB - after the system is running. Or you could move your disk - into a system which has sufficient memory, install onto - the disk and then swap it back.</para> - - <para>You must build a custom kernel to run in 4MB. Someone - has even successfully booted &os; with 2 MB RAM, although - the system was almost unusable.</para> - </answer> - </qandaentry> - - <qandaentry> <question id="custom-boot-floppy"> <para>How can I make my own custom install floppy?</para> </question> @@ -1836,12 +1802,9 @@ <para>Building a new kernel was originally pretty much a required step in a FreeBSD installation, but more recent releases have benefited from the introduction of much friendlier kernel - configuration methods. In 4.X and earlier, when at the FreeBSD boot prompt (boot:), - use the <option>-c</option> flag and you will be dropped into a - visual configuration screen which allows you to configure the - kernel's settings for most common ISA cards. In &os; 5.X and later - this has been replaced by much more flexible "hints" which - can be set from the loader prompt.</para> + configuration methods. In &os; 5.X and later, it is very easily + to configure the kernel's configuration by much more flexible + "hints" which can be set from the loader prompt.</para> <para>It may still be worthwhile building a new kernel containing just the drivers that you need, just to save a @@ -2189,11 +2152,6 @@ on certain UP machines led to the decision to disable it until those problems can be addressed. This is a priority for &os; 5.4.</para> - - <para>In &os; 4.X, SMP is not enabled in the default kernel, - so you must recompile your kernel to enable SMP. Take a - look at <filename>/sys/i386/conf/LINT</filename> to learn - which options to put in your kernel config file.</para> </answer> </qandaentry> </qandaset> @@ -2210,9 +2168,9 @@ </question> <answer> - <para>FreeBSD supports EIDE and SCSI drives (with a compatible - controller; see the next section), and all drives using the - original <quote>Western Digital</quote> interface (MFM, RLL, + <para>FreeBSD supports EIDE, SATA, SCSI, and SAS drives (with a + compatible controller; see the next section), and all drives using + the original <quote>Western Digital</quote> interface (MFM, RLL, ESDI, and of course IDE). A few ESDI controllers that use proprietary interfaces may not work: stick to WD1002/3/6/7 interfaces and clones.</para> @@ -2221,7 +2179,7 @@ <qandaentry> <question id="supported-scsi-controllers"> - <para>Which SCSI controllers are supported?</para> + <para>Which SCSI or SAS controllers are supported?</para> </question> <answer> ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml#2 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.359 2007/07/14 17:32:36 blackend Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.360 2007/07/16 14:51:07 chinsan Exp $ --> <chapter id="install"> @@ -4389,9 +4389,9 @@ hardware or simply because you insist on doing things the hard way, you must first prepare some floppies for the installation.</para> - <para>At a minimum, you will need as many 1.44 MB or 1.2 MB floppies + <para>At a minimum, you will need as many 1.44 MB floppies as it takes to hold all the files in the - <filename>bin</filename> (binary distribution) directory. If + <filename>base</filename> (base distribution) directory. If you are preparing the floppies from DOS, then they <emphasis>must</emphasis> be formatted using the &ms-dos; <command>FORMAT</command> command. If you are using &windows;, @@ -4416,11 +4416,6 @@ &prompt.root; <userinput>bsdlabel -w fd0.1440 floppy3</userinput> &prompt.root; <userinput>newfs -t 2 -u 18 -l 1 -i 65536 /dev/fd0</userinput></screen> - <note> - <para>Use <literal>fd0.1200</literal> and - <literal>floppy5</literal> for 5.25" 1.2 MB disks.</para> - </note> - <para>Then you can mount and write to them like any other filesystem.</para> @@ -4431,8 +4426,16 @@ files as will fit on each one, until you have all of the distributions you want packed up in this fashion. Each distribution should go into a subdirectory on the floppy, e.g.: - <filename>a:\bin\bin.aa</filename>, - <filename>a:\bin\bin.ab</filename>, and so on.</para> + <filename>a:\base\base.aa</filename>, + <filename>a:\base\base.ab</filename>, and so on.</para> + + <important> + <para>The <filename>base.inf</filename> file also needs to go on the + first floppy of the <filename>base</filename> set since it is read + by the installation program in order to figure out how many + additional pieces to look for when fetching and concatenating the + distribution.</para> + </important> <para>Once you come to the Media screen during the install process, select <guimenuitem>Floppy</guimenuitem> and you ==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/kernelconfig/chapter.sgml#2 (text+ko) ==== >>> TRUNCATED FOR MAIL (1000 lines) <<<
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200707191942.l6JJg5iP036428>