Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 3 Aug 2001 09:49:41 -0500
From:      "Thomas T. Veldhouse" <veldy@veldy.net>
To:        "j mckitrick" <jcm@FreeBSD-uk.eu.org>
Cc:        <freebsd-stable@freebsd.org>
Subject:   Re: moving to XFree86-4
Message-ID:  <010101c11c2b$8a0ca320$3028680a@tgt.com>
References:  <20010802112630.A9855@dogma.freebsd-uk.eu.org> <3B69550D.3060803@lmc.ericsson.se> <20010802143532.A11148@dogma.freebsd-uk.eu.org> <01080212254800.01448@saffron.my.domain> <20010803154352.A25257@dogma.freebsd-uk.eu.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Yes -- but there could be other causes as well (i.e. compile options were to
optimized -- I have had this problem using -march=k6).

Tom Veldhouse
veldy@veldy.net

----- Original Message -----
From: "j mckitrick" <jcm@FreeBSD-uk.eu.org>
To: "William Richard" <wdr@tdl.com>
Cc: <freebsd-stable@FreeBSD.ORG>
Sent: Friday, August 03, 2001 9:43 AM
Subject: Re: moving to XFree86-4


> | Before you deinstall all of your X ports, make sure the new X server
> | works.  And make sure you can go back to 3.3.6 relatively expeditiously
> | (mv /usr/X11R6 /usr/X11backup).  The XFree86-4 X server dumped core on
> | my allegedly-supported Matrox Mystique shortly after starting, so I
> | never got past the configuration.  If I hadn't had the old X11R6
> | directory backed up, I would have been mightily screwed.
>
> I ran XFree86 -configure, then ran it again using that file.  I got a
signal
> 10 error, and a core dump.  Does a signal 10 under XFree86 mean the same
as
> a signal 10 in make world, namely bad memory?
>
>
>
> jm
> --
> "Investigators have discovered the cause of the TWA 800 explosion
> was a frayed wire.  The wire became frayed when it was struck
> by a missile."
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?010101c11c2b$8a0ca320$3028680a>