Date: Wed, 19 Aug 1998 09:53:59 -0400 From: Mark Fullmer <maf@net.ohio-state.edu> To: freebsd@magnet.geophysik.tu-freiberg.de Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Answering myself, was: URGENT! ASUS P2B/LS supported ? Message-ID: <19980819095359.A20393@net.ohio-state.edu> In-Reply-To: <199807291334.PAA06279@magnet.geophysik.tu-freiberg.de>; from Holm Tiffe on Wed, Jul 29, 1998 at 03:34:59PM %2B0200 References: <19980728120553.A22817@net.ohio-state.edu> <199807291334.PAA06279@magnet.geophysik.tu-freiberg.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 29, 1998 at 03:34:59PM +0200, Holm Tiffe wrote: > > On Tue, Jul 28, 1998 at 01:08:58PM +0200, Holm Tiffe wrote: > [..] > > > > This is -stable around the 2.2.7 branch, not current. The pci code > > has changed quite a bit in -current. > > > > chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:4:0 > > chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1 > > chip4 <Intel 82371AB USB interface> rev 1 int d irq 12 on pci0:4:2 > > chip5 <Intel 82371AB Power management controller> rev 2 on pci0:4:3 > > ahc0 <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0 int a irq 12 on pci0:6:0 > > pci_map_mem failed: bad memory type=0xfffff004 > > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs > > fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 10 on pci0:7:0 > avail memory = 259104768 (253032K bytes) > Probing for devices on PCI bus 0: > chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0 > chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0 > chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0 > chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.4.2 > chip4: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3 > ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0 > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs > fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 10 on pci0.7.0 > fxp0: Ethernet address 00:e0:18:90:2b:8f > > This is from my dmesg output. You are sure, that you have used the cam-drivers? > [yeah, I know, a stupid question] (I've never tryed to use the old drivers) > Have we the same revision of the host to pci bridge ? It's a -stable problem, not -current. I do have the CAM patches applied, but that shouldn't matter. -- mark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980819095359.A20393>