Date: Fri, 11 Jun 2004 05:09:41 GMT From: Adam Dawson <adenergy@hotmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/67818: Marvell if_sk driver watchdog timeout issue on asus p4p800 motherboard Message-ID: <200406110509.i5B59f3A096329@www.freebsd.org> Resent-Message-ID: <200406110510.i5B5ACKh053160@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 67818 >Category: i386 >Synopsis: Marvell if_sk driver watchdog timeout issue on asus p4p800 motherboard >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jun 11 05:10:11 GMT 2004 >Closed-Date: >Last-Modified: >Originator: Adam Dawson >Release: 5.2.1-RELEASE >Organization: Home >Environment: FreeBSD host 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386 >Description: sk0 network interface stops passing traffic during high traffic load. Occasionally a "sk0: watchdog timeout" error is sent to console,messages but not always. Tried unplugging/reconnecting network cable - no go Tried ifconfig sk0 down; ifconfig sk0 up - no go Sometimes it returns after about a minute or 2, most times requires a reboot. >From the server I can use FTP to get a large file from another server OK. Breaks if I try to put a large fle to another server. Using a 2.8Ghz processor with hyperthreading enabled on an asus p4p800 motherboard. The interface is built into the motherboard. Interface still appears to be recieving packets eg. tcpdump sees traffic such as ping requests but no replies are sent. Using IPFW but tried with ipfw disabled and it is still a problem. CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2798.66-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1072889856 (1023 MB) avail memory = 1032847360 (985 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled .. skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 22 at device 5.0 on pci2 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0e:a6:94:b8:fd miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto >How-To-Repeat: Standard FreeBSD 5.2.1 install on hardware specified above. Transfer alot of traffic. Appears to be high outbound traffic that causes the problem. >Fix: Dont know one. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406110509.i5B59f3A096329>