Date: Wed, 22 Mar 2000 11:48:46 -0000 (GMT) From: Pedro Almeida <pedro@qui.uc.pt> To: Brian Budnick <brian@utrave.org> Cc: freebsd-questions@FreeBSD.ORG Subject: RE: 4.0-20000314-CURRENT (Keeps Rebooting!) Message-ID: <XFMail.20000322114846.pedro@qui.uc.pt> In-Reply-To: <4.3.0.20000322115356.00af1a88@mail.utrave.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I have the same sympthoms on a similar machine!
After a few ( 3 - 3,5 hours) the thing reboots.
Just like Brian... the machine ran from 3.0 to 3.4 stable perfectly.
Any ideas??
At this point I'm thinking in that the problem have some relation to the
network card driver modifiactions in this release. Tomorrow I'll try another
card, maybe one Intel Ether Express Pro 100
here it is the dmesg of this machine.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Tue Mar 21 23:22:31 GMT 2000
pedro@metodologia2.uc.pt:/usr/src/sys/compile/BIGORNA
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 267273912 Hz
CPU: \^E (267.27-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x570 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 67108864 (65536K bytes)
config> quit
avail memory = 61669376 (60224K bytes)
Preloaded elf kernel "kernel" at 0xc0346000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034609c.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device
7.3 on pci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 9.0 irq 12
ncr0: <ncr 53c875 fast20 wide scsi> port 0x6500-0x65ff mem
0xe4001000-0xe4001fff,0xe4000000-0
xe40000ff irq 10 at device 10.0 on pci0
ncr0: driver is using old-style compatability shims
rl0: <RealTek 8139 10/100BaseTX> port 0x6600-0x667f mem 0xe4002000-0xe400207f
irq 9 at device
11.0 on pci0
rl0: Ethernet address: 00:4f:4e:01:b6:4b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: supplying EUI64: 00:4f:4e:ff:fe:01:b6:4b
isa0: unexpected tag 14
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard LaserJet 4L> HP ENHANCED PCL5,PJL
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq
1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.16> on sbc0
unknown0: <Game> at port 0x200-0x207 on isa0
unknown1: <WaveTable> at port 0x620-0x623 on isa0
ad0: 6149MB <QUANTUM FIREBALL ST6.4A> [13328/15/63] at ata0-master using UDMA33
afd0: 96MB <IOMEGA ZIP 100 ATAPI Floppy> [96/64/32] at ata0-slave using PIO0
acd0: CDROM <FX320S> at ata1-master using PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9100> at ata1-slave using UDMA33
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
cd0 at ncr0 bus 0 target 4 lun 0
cd0: <TOSHIBA CD-ROM XM-3701TA 3475> Removable CD-ROM SCSI-2 device
cd0: 4.901MB/s transfers (4.901MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
rl0: starting DAD for fe80:0001::024f:4eff:fe01:b64b
rl0: DAD complete for fe80:0001::024f:4eff:fe01:b64b - no duplicates found
==========================================================
Pedro Almeida (aka GoDfAtHeR)
E-Mail: Pedro Almeida <pedro@qui.uc.pt>
Sent on 22-Mar-2000 at 11:33:24 from godfather.mafia.net
Fortune: Overdrawn? But I still have checks left!
PGP key available upon request
"Try to realize the truth... there is no spoon!."
- A kid in the movie "The Matrix"
==========================================================
Next 5 years holiday plan:
2000: Usenix & FreeBSD Conference
2001: Russia
2002: Australia
2003: The world
200Segmentation fault (core dumped)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.20000322114846.pedro>