Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 22 Jul 2004 11:23:53 +0200
From:      Jan Lentfer <lentferj@bio.tu-darmstadt.de>
To:        freebsd-current@www.freebsd.org
Subject:   5.2-CURRENT constantly crashing
Message-ID:  <200407221123.53863.lentferj@bio.tu-darmstadt.de>

next in thread | raw e-mail | index | archive | help

Hi,

i am running 5.2-CURRENT on an old 4x PPRO (200) Amdahl EnVista Server.
The system is constantly crashing under heavy load for about 2-3 month now.
Since all drives are connected to a Mylex Raid Controller, I can't get any 
kernel dumps :(.

The system fails with "panic: page fault. fatal trap 12. fault code = 
supervisor read, page not present".

Since this is old hardware I am not quite sure if this is a hardware or 
software problem, but the system used to run stable with 5.1-RELEASE.

I don't have a serial console either, so i can't copy and paste the panic 
warning. Any way this can be sent over ssh so I can post the complete kernel 
panic??

This is the output from systat -vmstat from the last crash (don't know if it 
helps):

    2 users    Load 11.96 12.03 10.58                  Jul 22 10:23

Mem:KB    REAL            VIRTUAL                     VN PAGER  SWAP PAGER
        Tot   Share      Tot    Share    Free         in  out     in  out
Act  226024   12128   585524    18944   27160 count
All  482280   43796  3256020   172068         pages    1
                                                     1508 zfod   Interrupts
Proc:r  p  d  s  w    Csw  Trp  Sys  Int  Sof  Flt     96 cow     242 total
     3    14113 12   2044 1884 1740  350   40 1671  94240 wire        1: atkb
                                                   257092 act         5: ahc1
15.8%Sys   1.1%Intr 51.0%User 23.6%Nice  8.4%Idl   130564 inact       6: fdc0
|    |    |    |    |    |    |    |    |    |       1992 cache   129 8: rtc
========>>>>>>>>>>>>>>>>>>>>>>>>>>------------      25832 free        9: ahc0
                                                          daefr     7 10: xl0
Namei         Name-cache    Dir-cache                1257 prcfr     6 11: mlx
    Calls     hits    %     hits    %                     react       13: npx
    11579    11522  100                                   pdwak   100 0: clk
                                                          pdpgs
Disks mlxd0 mlxd1   cd0   fd0 pass0                       intrn
KB/t   5.21  0.00  0.00  0.00  0.00                 61888 buf
tps       5     0     0     0     0                   105 dirtybuf
MB/s   0.03  0.00  0.00  0.00  0.00                 35957 desiredvnodes
% busy    4     0     0     0     0                  8989 numvnodes
                                                     1193 freevnodes




amdahl# uname -a
FreeBSD amdahl.bio.tu-darmstadt.de 5.2-CURRENT FreeBSD 5.2-CURRENT #2: Thu Jul  
8 12:37:12 CEST 2004     
lentferj@amdahl.bio.tu-darmstadt.de:/usr/obj/usr/src/sys/PPRO_SMP  i386




amdahl# cat /usr/src/sys/i386/conf/PPRO_SMP

machine         i386
#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           PPRO_SMP

# Turn on Filesystem Quotas
options         QUOTA

# Enable IP Filtering
options IPFIREWALL
options IPDIVERT
options IPFIREWALL_DEFAULT_TO_ACCEPT
options DUMMYNET

#To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         #Default places to look for devices.

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug 
symbols

options         SCHED_4BSD              #4BSD scheduler
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_ACL                 #Support for access control lists
options         UFS_DIRHASH             #Improve performance on big 
directories
options         MD_ROOT                 #MD is a potential root device
options         NFSCLIENT               #Network Filesystem Client
options         NFSSERVER               #Network Filesystem Server
options         NFS_ROOT                #NFS usable as root device, requires 
NFSCLIENT
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem (requires 
PSEUDOFS)
options         PSEUDOFS                #Pseudo-filesystem framework
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         COMPAT_FREEBSD4         #Compatible with FreeBSD4
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time 
extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.

# Debugging for use in -current
#options        DDB                     #Enable the kernel debugger
#options        INVARIANTS              #Enable calls of extra sanity checking
options         INVARIANT_SUPPORT       #Extra sanity checks of internal 
structures, required by INVARIANTS
#options        WITNESS                 #Enable checks to detect deadlocks and 
cycles
#options        WITNESS_SKIPSPIN        #Don't run witness on spinlocks for 
speed

# To make an SMP kernel, the next two are needed
options         SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O
device          apic

device          isa
device          eisa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI Controllers
#device         ahb             # EISA AHA1742 family
device          ahc             # AHA2940 and onboard AIC7xxx devices
#device         ahd             # AHA39320/29320 and onboard AIC79xx devices
#device         amd             # AMD 53C974 (Tekram DC-390(T))
#device         isp             # Qlogic family
#device         mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
#device         sym             # NCR/Symbios Logic (newer chipsets + those of 
`ncr')
#device         trm             # Tekram DC395U/UW/F DC315U adapters

#device         adv             # Advansys SCSI adapters
#device         adw             # Advansys wide SCSI adapters
#device         aha             # Adaptec 154x SCSI adapters
#device         aic             # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device         bt              # Buslogic/Mylex MultiMaster SCSI adapters

#device         ncv             # NCR 53C500
#device         nsp             # Workbit Ninja SCSI-3
#device         stg             # TMC 18C30/18C50

# RAID controllers interfaced to the SCSI subsystem
#device         asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device         ciss            # Compaq Smart RAID 5*
#device         dpt             # DPT Smartcache III, IV - See NOTES for 
options!
#device         iir             # Intel Integrated RAID
#device         mly             # Mylex AcceleRAID/eXtremeRAID

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          ch              # SCSI media changers
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
device          ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers
#device         aac             # Adaptec FSA RAID
#device         aacp            # SCSI passthrough for aac (requires CAM)
#device         amr             # AMI MegaRAID
#device         ida             # Compaq Smart RAID
#device         ips             # IBM (Adaptec) ServeRAID
device          mlx             # Mylex DAC960 family
#device         pst             # Promise Supertrak SX6000
#device         twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

# Enable this for the pcvt (VT220 compatible) console driver
#device         vt
#options        XSERVER                 # support for X server on a vt console
#options        FAT_CURSOR              # start with block cursor

#device         agp             # support several AGP chipsets

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
#device         cbb                     # cardbus (yenta) bridge
#device         pcic                    # ExCA ISA and PCI bridges
#device         pccard                  # PC Card (16-bit) bus
#device         cardbus                 # CardBus (32-bit) bus

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da


# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
#device         em              # Intel PRO/1000 adapter Gigabit Ethernet Card
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         dc              # DEC/Intel 21143 and various workalikes
#device         fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over 
'lnc')
#device         rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         sk              # SysKonnect SK-984x and SK-982x gigabit 
ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device         bge             # Broadcom BCM570xx Gigabit Ethernet

# ISA Ethernet NICs.  pccard nics included.
#device         cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device         lnc             # NE2100, NE32-VL Lance Ethernet cards
#device         sn              # SMC's 9000 series of ethernet chips
#device         xe              # Xircom pccard ethernet

# ISA devices that use the old ISA shims
#device         le

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         awi             # BayStack 660 and others
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless 
NICs.
#device         wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices - the number indicates how many units to allocate.
device          random          # Entropy device
device          loop            # Network loopback
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf             # Berkeley packet filter

# USB support
#device         uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
#device         usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
#device         ugen            # Generic
#device         uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
#device         ums             # Mouse
#device         urio            # Diamond Rio 500 MP3 player
#device         uscanner        # Scanners
# USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         axe             # ASIX Electronics USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet

# FireWire support
#device         firewire        # FireWire bus code
#device         sbp             # SCSI over FireWire (Requires scbus and da)
#device         fwe             # Ethernet over FireWire (non-standard!)




amdahl# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #2: Thu Jul  8 12:37:12 CEST 2004
    lentferj@amdahl.bio.tu-darmstadt.de:/usr/obj/usr/src/sys/PPRO_SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium Pro (198.95-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 536870912 (512 MB)
avail memory = 519884800 (495 MB)
MPTable: <INTEL    ALDER       >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  4
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-15 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> at pcibus 0 on 
motherboard
pci0: <PCI bus> on pcib0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xfc80-0xfcff mem 
0xfeaffc00-0xfeaffc7f irq 10 at device 13.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:a8:b4:cf
xl0: [GIANT-LOCKED]
eisab0: <PCI-EISA bridge> at device 14.0 on pci0
eisa0: <EISA bus> on eisab0
mainboard0: <INT31c0 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
pci0: <unknown> at device 15.0 (no driver attached)
pci0: <memory, RAM> at device 20.0 (no driver attached)
pcib1: <Intel 82454KX/GX (Orion) host to PCI bridge> at pcibus 1 on 
motherboard
pci1: <PCI bus> on pcib1
mlx0: <Mylex version 3 RAID interface> port 0xec80-0xecff mem 
0xfe8ffc00-0xfe8ffc7f irq 11 at device 10.0 on pci1
mlx0: [GIANT-LOCKED]
mlx0: DAC960P/PD, 2 channels, firmware 3.51-0-04, 32MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 8188MB (16769024 sectors) RAID 0 (online)
mlxd1: <Mylex System Drive> on mlx0
mlxd1: 20455MB (41891840 sectors) RAID 0 (online)
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xe800-0xe8ff mem 
0xfe8fe000-0xfe8fefff irq 9 at device 11.0 on pci1
ahc0: Using left over BIOS settings
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xe400-0xe4ff mem 
0xfe8fd000-0xfe8fdfff irq 5 at device 12.0 on pci1
ahc1: Using left over BIOS settings
ahc1: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
cpu0 on motherboard
cpu1 on motherboard
cpu2 on motherboard
cpu3 on motherboard
orm0: <ISA Option ROMs> at iomem 
0xec000-0xeffff,0xea000-0xebfff,0xcf000-0xcf7ff,0xce800-0xcefff,0xc0000-0xc7fff 
on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
psmcpnp0: irq resource info is missing; assuming irq 12
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to 
accept, logging disabled
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
cd0 at ahc1 bus 0 target 0 lun 0
cd0: <TEAC CD-ROM CD-516S 1.0D> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/mlxd0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 40 files 10
WARNING: /usr was not properly dismounted
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 12 files 0
/var: superblock summary recomputed
WARNING: /blast was not properly dismounted
Accounting enabled



Thanks,


Jan 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200407221123.53863.lentferj>