Date: Sat, 25 Oct 1997 13:48:24 +0000 From: "Hai T. Le" <hai@flash.net> To: freebsd-questions@FreeBSD.ORG Subject: X server Message-ID: <3451F8A8.5825@flash.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------652C42EF79E2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi: I recently got this problem. When I boot up FreeBSD, I configured it to start XDM. However when I type in my login and password, X tries to log me in, but then logs me out again. I can't seem to get into my account using X. If you use one of my other consoles, I can log in. I recently purchased a 3 button mouse. Do you think this has anything to do with it? I have a microsoft 2-button mouse before. I didn't do anything different. I used to log in without any problems. Also, I don't know if this is the correct method, but when I shutdown, I generally logout of my account in X, hit CTRL-ALT-F1 to get to a non-X terminal, login, and then type "shutdown now". The reason I do this is because, xsm always asks me the next time I log in if I want to loag in as failsafe, or default if I shutdown in X. Any thoughts??? I included the xdm-error file. I don't know what the errors mean though. -- Thanks, Hai --------------652C42EF79E2 Content-Type: text/plain; charset=us-ascii; name="Xdm.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="Xdm.txt" XFree86 Version 3.2 / X Window System (protocol Version 11, revision 0, vendor release 6100) Release Date: Oct 26 1996 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.2.0 Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /usr/X11R6/lib/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: disabled (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/psm0, baudrate: 1200 (**) S3: Graphics device ID: "S3 Trio64V+ (generic)" (**) S3: Monitor ID: "My Monitor" (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xf8000000 (--) S3: card type: PCI (--) S3: chipset: Trio64V+ rev. 541 (--) S3: chipset driver: newmmio (--) S3: videoram: 1024k (--) S3: for Trio32/64 chips you shouldn't specify a Ramdac (--) S3: Ramdac type: s3_trio64 (--) S3: Ramdac speed: 135 (--) S3: Using Trio32/64 programmable clock (MCLK 50.114 MHz) (--) S3: Maximum allowed dot-clock: 135.000 MHz (**) S3: Mode "640x480": mode clock = 31.500 (**) S3: Mode "800x600": mode clock = 50.000 (**) S3: Mode "1024x768": mode clock = 65.000 (--) S3: Using 6 bits per RGB value (**) S3: Virtual resolution set to 1024x768 (--) S3: Local bus LAW is 0xF8000000 (--) S3: Using a banksize of 1024k, line width of 1024 (--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps (--) S3: Using 8 planes of 960x255 at (0,769) aligned 8 as font cache PEX extension module not loaded XIE extension module not loaded X connection to :0.0 broken (explicit kill or server shutdown). PEX extension module not loaded XIE extension module not loaded X connection to :0.0 broken (explicit kill or server shutdown). PEX extension module not loaded XIE extension module not loaded --------------652C42EF79E2--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3451F8A8.5825>