Date: Tue, 18 Jun 2002 19:53:03 -0400 From: "Miroslav Pendev" <shadow@CPE0004761ac738-CM00109515bc65.cpe.net.cable.rogers.com> To: <pjklist@ekahuna.com> Cc: "questions" <freebsd-questions@freebsd.org>, "Matthew Plews" <plews@bigpond.net.au>, "Bruce A. Mah" <bmah@FreeBSD.ORG> Subject: Re: FreeBSD 4.6 Install Problem Message-ID: <001b01c21723$4abc16d0$be01a8c0@XXX> References: <20020618213145646.AAA642@empty1.ekahuna.com@pc02.ekahuna.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Philip, Although the system is OK now (CDROM is not working), I will try this tomorrow, the firewall is at my work place, so... My CD ROM is Acer 56x and the IDE cable is with 40 conductors instead of 80 The hard drive is ATA66 - may be this combination makes ATA Atapi driver problem... I would like to help with tests of the workaround or patch or whatever the guys from _core_ provide if this can help. The system is online and I can give account to someone if it is necessary! I will be glad to help! There was a tread in _security_ about new ISO for 4.6 together with the Apache - patch, may be it is not such a bad idea. The first ISO with 4.5 RELEASE was without the floppy images ... so... I am not trying to start flame war, this is just my opinion... I am ready to help... --Miro ----- Original Message ----- From: "Philip J. Koenig" <pjklist@ekahuna.com> To: <questions@FreeBSD.ORG> Cc: "Matthew Plews" <plews@bigpond.net.au>; "Miroslav Pendev" <shadow@CPE0004761ac738-CM00109515bc65.cpe.net.cable.rogers.com> Sent: Tuesday, June 18, 2002 5:31 PM Subject: Re: FreeBSD 4.6 Install Problem > > Date: Tue, 18 Jun 2002 09:29:10 -0400 > > From: "Miroslav Pendev" <shadow@CPE0004761ac738-CM00109515bc65.cpe.net.cable.rogers.com> > > > > Hi Matthew, > > > > I just got exactly the same problem with 4.6 RELEASE > > The installation stops at 0% because of that error: > > > > ac0: READ_BIG command timeout - resetting > > ATA0: RESETTING dev.. acd0 > > > > DMA limited to UDMA 33, non ATA66 cable or device > > > > The motherboard is IntelSE440BX2. Before 4.6 it was > > Firewall with FreeBSD 4.3 for about a year without > > any problems. The IDE cable is NOT ATA66 this is true! > > > > I was able to continue the installation with FTP installation > > instead of CDROM. It may be due to bad CDROM drive or changes into > > ATA driver, I don't know yet. > > > > The FTP installation may take little bit longer because > > of the load on the ftp.freebsd.org but you can try > > to find a mirror close to you! > > > > Hope that helps! > > > > - --Miro > > > So do you actually have DMA enabled for the CDROM? Apparently this > seems to be the source of many troubles with 4.6. Please see the > message included below, forwarded from the FreeBSD-Stable list, and > thanks to Doug Barton for providing the initial suggestion that Bruce > expanded upon: > > ------------------------ Begin Included Message --------------------- > > Date: Mon, 17 Jun 2002 21:32:35 -0700 > From: "Bruce A. Mah" <bmah@FreeBSD.ORG> > Subject: Re: ATA Atapi 4.6 Release > > > If memory serves me right, John Prince wrote: > > Thanks.. > > and you are right.. > > This worked? OK. > > I'll work on an errata entry for this. Here's my understanding, > mostly based on dougb's message plus a little experimenting: > > This problem is that some users are having difficulty reading CD-ROMs > on certain ATA CD-ROM drives. This has been seen on the AOpen 48x, > 52x, and 56x CD-ROM drives (are there any non-AOpen drives that have > this problem?). The error message one sees is: > > acd0: READ_BIG command timeout - resetting > ata1: resetting devices .. done > > (In some cases, this is followed by a kernel panic.) > > We need first-time CD-ROM users (with affected hardware) to interrupt > their boot process (at the "Hit [Enter] to boot immediately..." > step), and then do: > > ok set hw.ata.ata_dma="1" > ok set hw.ata.atapi_dma="1" > ok boot > > (This gets a working system for a CD-ROM install.) > > Do the install like normal. > > After installation is complete, we need to apply the workaround for > subsequent reboots. Reboot after finishing the installation and then > add these lines to /boot/loader.conf or /boot/loader.conf.local > (create as necessary): > > hw.ata.ata_dma="1" > hw.ata.atapi_dma="1" > > Then reboot one more time. > > Is that roughly right? I'm mostly interested in getting an errata > entry containing the correct workaround out quickly, rather than > getting the list of CDROM drives exactly right. We can fine-tune > said list later. > > Bruce. > > > ------------------------ End Included Message ----------------------- > > > > - ----- Original Message ----- > > From: "Matthew Plews" <plews@bigpond.net.au> > > To: <freebsd-questions@FreeBSD.ORG> > > Sent: Monday, June 17, 2002 5:55 AM > > Subject: FreeBSD 4.6 Install Problem > > > > > > Hi, > > > > i just downloaded the freebsd 4.6 iso and tried installing it on my computer. > > > > everything works fine up untill it goes to "Extracting bin into / directory' > > then it just freezes at 0%... > > > > i've tried reinstalling several times but everytime it just stops there.. > > > > i've had no problems with this on 4.4 or 4.5... > > > > thanks in advance > > > > matt > > plews@bigpond.net.au > > > > -- > Philip J. Koenig pjklist@ekahuna.com > Electric Kahuna Systems -- Computers & Communications for the New Millenium > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001b01c21723$4abc16d0$be01a8c0>