Date: Wed, 7 Nov 2007 00:31:11 -0800 From: Jeremy Chadwick <koitsu@FreeBSD.org> To: Rusty Nejdl <rnejdl@ringofsaturn.com> Cc: d@delphij.net, "Andrey V. Elsukov" <bu7cher@yandex.ru>, "Aryeh M. Friedman" <aryeh.friedman@gmail.com>, Justin Hibbits <jrh29@alumni.cwru.edu>, freebsd-current@freebsd.org Subject: Re: [ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up Message-ID: <20071107083111.GA22235@eos.sc1.parodius.com> In-Reply-To: <52072.71.164.232.42.1194411864.squirrel@mail.ringofsaturn.com> References: <472F5846.1020304@gmail.com> <472F5D9A.9050900@delphij.net> <472FCC15.9040903@gmail.com> <472FD0FB.9090608@delphij.net> <473001E7.2090201@yandex.ru> <473017DF.7070105@gmail.com> <62151.71.164.232.42.1194356793.squirrel@mail.ringofsaturn.com> <20071106144749.GA91218@eos.sc1.parodius.com> <47525.209.159.98.1.1194362931.squirrel@mail.ringofsaturn.com> <52072.71.164.232.42.1194411864.squirrel@mail.ringofsaturn.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Nov 06, 2007 at 11:04:24PM -0600, Rusty Nejdl wrote: > I removed the jumpers per the doc and unfortunately, there was no change: There was a change -- look at the output from atacontrol again: > ATA channel 6: > Master: ad12 <ST3750640AS/3.AAK> Serial ATA II > Slave: no device present > ATA channel 8: > Master: ad16 <ST3750640AS/3.AAK> Serial ATA II > Slave: no device present The devices now claim to support SATA300 (or hould. Scott Long's mail is also applicable, but in this case I believe the drives should in fact be utilising SATA300 speeds). The dmesg output shows that the maximum speed being negotiated between the OS and the controller is SATA150, which means there's likely a driver (FreeBSD) issue going on here. Keep the jumpers off the drives, though, otherwise you won't get SATA300 once the problem is fixed. -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071107083111.GA22235>