Date: Wed, 16 Jul 2003 09:00:22 +1000 From: JacobRhoden <jrhoden@unimelb.edu.au> To: Josef Karthauser <joe@freebsd.org> Cc: freebsd-hackers@freebsd.org Subject: Re: Intel D845EPT2 Motherboard - USB broken :( Message-ID: <200307160900.22018.jrhoden@unimelb.edu.au> In-Reply-To: <20030715222950.GA39907@genius.tao.org.uk> References: <200307141446.35380.jrhoden@unimelb.edu.au> <20030715222950.GA39907@genius.tao.org.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 16 Jul 2003 08:29 am, Josef Karthauser wrote:
> > Does anyone here use the Intel EPT2 motherboard? Have they managed to get
> > USB working, and if so how?
>
> Can you mail us a copy of your 'dmesg' after a boot? What kind of
> controller is it?
Its an Intel 82801DB (ICH4) according to dmesg. I have attached the dmesg
output below for reference. You can see at the bottom, when you plug a
device in you get an error message from uhub[012]. If theres any more useful
things I can attach let me know! (: I dont know enough to go hacking around
in uhub.c but I may try if I get desperate! (:
Thanks,
Jacob
FreeBSD 4.8-STABLE #3: Mon Jul 14 11:02:34 EST 2003
jrhoden@elkanah.its.unimelb.edu.au:/usr/obj/usr/src/sys/JOAB2
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz (1599.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536084480 (523520K bytes)
avail memory = 515932160 (503840K bytes)
Preloaded elf kernel "kernel" at 0xc0586000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f4670
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11
at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 9 at
device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 10
at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdc00-0xdc1f irq 10 at device
2.0 on pci2
ed0: address 00:50:ba:f2:33:79, type NE2000 (16 bit)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xd880-0xd8bf mem
0xfeaff000-0xfeafffff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:03:47:2a:2f:61
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <SMBus controller> port 0xe000-0xe01f irq 5 at device 31.3 on pci0
pcm0: <Intel 82801DB (ICH4)> port 0xe080-0xe0bf,0xe400-0xe4ff mem
0xfebff800-0xfebff8ff,0xfebffc00-0xfebffdff irq 5 at device 31.5 on pci0
pcm0: <unknown ac97 codec> (id=0x41445372)
orm0: <Option ROM> at iomem 0xc0000-0xc8fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to accept, logging limited to 100 packets/entry by default
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100
acd0: CD-RW <CD-RW 24X10X40> at ata0-slave PIO4
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. done
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. done
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. done
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. done
acd1: CDROM <SONY CD-ROM CDU523 1> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name:
build-570 $
/dev/vmmon: Module vmmon: initialized
uhub0: device problem, disabling port 1
uhub2: device problem, disabling port 1
uhub2: device problem, disabling port 2
uhub2: device problem, disabling port 1
uhub0: device problem, disabling port 1
Jacob Rhoden Phone: +61 3 8344 4478
ITS Division Email: jrhoden@unimelb.edu.au
Melbourne University Mobile: +61 403 788 386
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200307160900.22018.jrhoden>