Date: Fri, 11 Jun 2004 14:24:34 GMT From: Andreas Norman <andreas@kntel.st> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/67833: 4.10 does not boot after enabling SMP Message-ID: <200406111424.i5BEOYgT031025@www.freebsd.org> Resent-Message-ID: <200406111430.i5BEUKYw006055@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 67833 >Category: i386 >Synopsis: 4.10 does not boot after enabling SMP >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jun 11 14:30:19 GMT 2004 >Closed-Date: >Last-Modified: >Originator: Andreas Norman >Release: 4.10 >Organization: kntel >Environment: this is dmesg when not having SMP enabled: FreeBSD 4.10-RELEASE #0: Fri Jun 11 15:39:06 CEST 2004 andreas@myserver.com:/usr/obj/usr/src/sys/andreas Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073676288 (1048512K bytes) avail memory = 1039986688 (1015612K bytes) Preloaded elf kernel "kernel" at 0xc04f7000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 19 entries at 0xc00fde30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 pci2: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xa000-0xa03f mem 0xfa000000-0xfa01ffff irq 15 at device 9.0 on pci2 em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xa400-0xa43f mem 0xfa020000-0xfa03ffff irq 15 at device 9.1 on pci2 em1: Speed:N/A Duplex:N/A pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 pci3: <PCI bus> on pcib3 ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xb400-0xb4ff,0xb000-0xb0ff mem 0xf9000000-0xf9001fff irq 15 at device 7.0 on pci3 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xbc00-0xbcff,0xb800-0xb8ff mem 0xf9002000-0xf9003fff irq 15 at device 7.1 on pci3 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs pci0: <unknown card> (vendor=0x8086, dev=0x2544) at 2.1 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xd800-0xd81f irq 10 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xd000-0xd01f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xd400-0xd41f irq 12 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci4: <PCI bus> on pcib4 pci4: <ATI Mach64-GR graphics accelerator> at 5.0 irq 11 isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 15 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd1000-0xd27ff,0xd3000-0xd47ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. acd0: CDROM <SR244W> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle em0: Link is up 100 Mbps Full Duplex da0 at ahd1 bus 0 target 0 lun 0 da0: <MAXTOR ATLAS15K_36SCA DTA0> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 35047MB (71776260 512 byte sectors: 255H 63S/T 4467C) Mounting root from ufs:/dev/da0s1a em0: Link is up 100 Mbps Full Duplex >Description: After enable of SMP, done with uncommenting following in kernconf: #options SMP # Symmetric MultiProcessorKernel #options APIC_IO # Symmetric (APIC) I/O and after install the server does not boot. It seem to be some kind of disk-problem. This is error i get just after syslogd is started: ahd1: Timeout SCBs already complete. Interrupts may not be functioning >How-To-Repeat: enable SMP >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406111424.i5BEOYgT031025>