Date: Wed, 4 Feb 1998 09:27:07 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: Lars Koeller <Lars.Koeller@post.uni-bielefeld.de> Cc: scsi@FreeBSD.ORG Subject: Re: SCB and 2940 Problems! Message-ID: <Pine.BSF.3.96.980204092512.15449B-100000@gdi.uoregon.edu> In-Reply-To: <199802040656.AA187635393@pollux.hrz.uni-bielefeld.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 4 Feb 1998, Lars Koeller wrote: > I do all this, before I'm going to contact you! OK, OK, I was making extra extra sure. At this point Im beginning to think that the Seagate is just a bad SCSI boy and could use a firmware upgrade if available. > I use the Seagate DAT at > both busses (see appended E-Mail below a AH2940 and a AH2940UW). The last > test was the ST15150N disk and the Seagate DAT at the 2940 with a very short > internal 50 pol ribbon cable. The disk terminates the bus as usual, > termpower from bus is o.k. No external devices. > The total cable lengthe never exceeds 2.5 meters! check > External cable is a hight quality 50 pol high desity Sub-D > to 50 pol centronics cable! check > There are always both (AH2940 and 2940UW) adapters installed! > In all cases, only the StDAT have hanging SCB's! > Any ideas??? Talk to Seagate, I guess. I'm out of ideas. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980204092512.15449B-100000>