Date: Sun, 10 Oct 1999 20:18:11 -0500 From: giesen@inil.com (giesen) To: freebsd-questions@FreeBSD.org Cc: giesen@inil.com, giesen@eis.comm.mot.com Subject: Plug-n-play modem woes Message-ID: <38013AD2.9C3884B@inil.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------B47AE1BEDFB57BA83F5EB518 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Here's hoping someone can help... I've looked here for others with the same problem and checked out the FAQ's and "The Complete FreeBSD," but I seem to be at an impasse. I have an internal, plug-n-play Zoom V.34 33.6 Speakerphone faxmodem that I can't seem to get to a usable sio_. I have Win98 on one drive (0) and BSD on the other (the accomplishment of which is a story in its own right) and I wish to keep the system that way, indefinitely. The modem isn't a Winmodem, as far as I can tell; it worked fine under Debian Linux. (I was a bit disappointed that Netscape hiccups caused Linux to crash a few times and decided to give FreeBSD a try.) I had the modem configured for COM3, IRQ5, 0x3e8 under Windows and Linux. (It configured to ttyS2 in Linux.) So, I put the pnp ID that I found (I think -- it was the one in the square brackets in the pnp detection output), and a text field in the sippnp_ids[] struct in sio.c and edited the sio2 line in my kernel config file (removing the "disable"). When I try to use this configuration, the kernel keeps seeming to find the modem at sio4 (yep, four). Since my BIOS is finding the modem (printing its info as "Zoom V.34 33.6 Speakerphone SVD," Card Number 1, Device Number 0, DMA - NA, IRQ 5 at boot time), I tried running "boot -c" upon booting BSD, using "pnp 1 0 bios" -- to no effect. Whether I use boot -c or not, the kernel prints out a message to the effect that it found my modem at sio4. Furthermore, when I "enable" (removed "disable" and rebuild the kernel) sio2 and reboot, the kernel complains "sio2 not probed due to I/O address conflict with sio4 at 0x3e8." So, I decided to try my luck with moving the modem to COM2, IRQ3 -- with no luck. I disabled sio2 again and rebuilt the kernel and tried booting with "boot -c" and without. Again, BSD keeps seeing the modem at sio4 and complains about the address conflict when probing sio1. Can anyone tell me what I'm missing? I'd sure appreciate any words of wisdom. Thanks, Bob Giesen P.S. I'm enclosing the kernel config files with and without the "disable" specifier in the sio2 line (kernenbl.txt & kerndsbl.txt) and the dmesg output after trying to boot with each resultant kernel (dmsgenbl.txt & dmsgdsbl.txt), and the cut from the sio.c file that shows the altered siopnn_ids[] struct (sio_cut.c); that was the only alteration I made to that file. --------------B47AE1BEDFB57BA83F5EB518 Content-Type: text/plain; charset=us-ascii; name="kernenbl.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="kernenbl.txt" # # GIESEN -- My first crack at a kernel configuration file. # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GIESEN 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" #cpu "I586_CPU" cpu "I686_CPU" ident GIESEN maxusers 32 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd1 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty # MAXCONS sets the maximum number of virtual consoles (via Alt-F? keys) options MAXCONS=12 #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether #pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device speaker # Play IBM BASIC-style noises from speaker #pseudo-device log # For logging of kernel messages pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter --------------B47AE1BEDFB57BA83F5EB518 Content-Type: text/plain; charset=us-ascii; name="kerndsbl.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="kerndsbl.txt" # # GIESEN -- My first crack at a kernel configuration file. # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GIESEN 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" #cpu "I586_CPU" cpu "I686_CPU" ident GIESEN maxusers 32 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd1 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty # MAXCONS sets the maximum number of virtual consoles (via Alt-F? keys) options MAXCONS=12 #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether #pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device speaker # Play IBM BASIC-style noises from speaker #pseudo-device log # For logging of kernel messages pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter --------------B47AE1BEDFB57BA83F5EB518 Content-Type: text/plain; charset=us-ascii; name="dmsgenbl.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmsgenbl.txt" Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #3: Sun Oct 10 16:20:59 CDT 1999 root@giesen:/usr/src/sys/compile/GIESEN Timecounter "i8254" frequency 1193182 Hz CPU: Cyrix 6x86MX (208.38-MHz 686-class CPU) Origin = "CyrixInstead" Id = 0x600 Stepping=0 DIR=0x0752 Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> real memory = 33554432 (32768K bytes) config> di zp0 config> di ze0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di wt0 config> di scd0 config> di mcd0 config> di matcdc0 config> di bt0 config> di aha0 config> di adv0 config> q FreeBSD Kernel Configuration Utility - Version 1.2 Type "help" for help or "visual" to go to the visual configuration interface (requires MGA/VGA display or serial terminal capable of displaying ANSI graphics). config> pnp 1 0 bios config> quit avail memory = 29638656 (28944K bytes) Preloaded elf kernel "kernel" at 0xc031e000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031e09c. Probing for devices on PCI bus 0: chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0 chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0 chip2: <AcerLabs M1533 portable PCI-ISA bridge> rev 0xb4 on pci0.7.0 ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0x20 int a irq 255 on pci0.15.0 Probing for devices on PCI bus 1: vga0: <S3 model 8a10 graphics accelerator> rev 0x06 int a irq 11 on pci1.0.0 Probing for PnP devices: CSN 1 Vendor ID: ZTIf761 [0x61f7896a] Serial 0x0013d761 Comp ID: @@@0000 [0x00000000] sio4: type 16550A sio4 (siopnp <Zoom 33.6 Fax-Modem-Speakerphone> sn 0x0013d761) at 0x3e8-0x3ef irq 5 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <12 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 not probed due to I/O address conflict with sio4 at 0x3e8 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <Maxtor 91303D6> wd0: 12427MB (25450992 sectors), 25249 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): <Maxtor 91303D6> wd1: 12427MB (25450992 sectors), 25249 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 1 (atapi): <ATAPI 40X CDROM DRIVE/VER-3.4A>, removable, accel, dma, iordis acd0: drive speed 687 - 6875KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd1s1a --------------B47AE1BEDFB57BA83F5EB518 Content-Type: text/plain; charset=us-ascii; name="dmsgdsbl.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmsgdsbl.txt" Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #2: Sun Oct 10 10:24:21 CDT 1999 root@giesen:/usr/src/sys/compile/GIESEN Timecounter "i8254" frequency 1193182 Hz CPU: Cyrix 6x86MX (208.38-MHz 686-class CPU) Origin = "CyrixInstead" Id = 0x600 Stepping=0 DIR=0x0752 Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> real memory = 33554432 (32768K bytes) config> di zp0 config> di ze0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di wt0 config> di scd0 config> di mcd0 config> di matcdc0 config> di bt0 config> di aha0 config> di adv0 config> q FreeBSD Kernel Configuration Utility - Version 1.2 Type "help" for help or "visual" to go to the visual configuration interface (requires MGA/VGA display or serial terminal capable of displaying ANSI graphics). config> pnp 1 0 bios config> quit avail memory = 29638656 (28944K bytes) Preloaded elf kernel "kernel" at 0xc031e000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031e09c. Probing for devices on PCI bus 0: chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0 chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0 chip2: <AcerLabs M1533 portable PCI-ISA bridge> rev 0xb4 on pci0.7.0 ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0x20 int a irq 255 on pci0.15.0 Probing for devices on PCI bus 1: vga0: <S3 model 8a10 graphics accelerator> rev 0x06 int a irq 11 on pci1.0.0 Probing for PnP devices: CSN 1 Vendor ID: ZTIf761 [0x61f7896a] Serial 0x0013d761 Comp ID: @@@0000 [0x00000000] sio4: type 16550A sio4 (siopnp <Zoom 33.6 Fax-Modem-Speakerphone> sn 0x0013d761) at 0x3e8-0x3ef irq 5 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <12 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <Maxtor 91303D6> wd0: 12427MB (25450992 sectors), 25249 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): <Maxtor 91303D6> wd1: 12427MB (25450992 sectors), 25249 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 1 (atapi): <ATAPI 40X CDROM DRIVE/VER-3.4A>, removable, accel, dma, iordis acd0: drive speed 687 - 6875KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd1s1a --------------B47AE1BEDFB57BA83F5EB518 Content-Type: application/x-unknown-content-type-c_auto_file; name="sio_cut.c" Content-Transfer-Encoding: base64 Content-Disposition: inline; filename="sio_cut.c" c3RhdGljIHBucGlkX3Qgc2lvcG5wX2lkc1tdID0gewoJeyAweDUwMTVmNDM1LCAiTU9UMTU1 MCJ9LAoJeyAweDgxMTNiMDRlLCAiU3VwcmExMzgxIn0sCgl7IDB4OTAxMmIwNGUsICJTdXBy YTEyOTAifSwKCXsgMHg3MTIxYjA0ZSwgIlN1cHJhRXhwcmVzcyA1NmkgU3AifSwKCXsgMHgx MTAwNzI1NiwgIlVTUjAwMTEifSwKCXsgMHgzMDIwNzI1NiwgIlVTUjIwMzAifSwKCXsgMHgz MTMwNzI1NiwgIlVTUjMwMzEifSwKCXsgMHg5MDMwNzI1NiwgIlVTUjMwOTAifSwKCXsgMHgw MTAwNDQwZSwgIkNhcmRpbmFsIE1WUDI4OElWIn0sCiAgICAgICAgeyAweDYxZjc4OTZhLCAi Wm9vbSAzMy42IEZheC1Nb2RlbS1TcGVha2VycGhvbmUiIH0sCgl7IDAgfQp9OwoK --------------B47AE1BEDFB57BA83F5EB518-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38013AD2.9C3884B>