Date: Wed, 11 Nov 1998 01:53:28 -0500 From: Rick <ric@home.com> To: freebsd-questions@FreeBSD.ORG Subject: mykernel wont make Message-ID: <3.0.5.32.19981111015328.007e8290@mail>
next in thread | raw e-mail | index | archive | help
--=====================_910785208==_ Content-Type: text/plain; charset="us-ascii" this custom kernel configs ok but i get error code 1 if i try to make it any ideas on why? i ran make depend first, it gives a bunch of undefined symbol errors before it goes to error code 1, stop. --=====================_910785208==_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="MYKERNEL" # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in= LINT. # # $Id: GENERIC,v 1.130 1998/11/03 22:01:21 des Exp= $ machine "i386" cpu "I586_CPU" ident MYKERNEL maxusers = 5 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep= this!] #options MFS #Memory Filesystem #options MFS_ROOT #MFS usable as root device, "MFS"= req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS"= req'ed #options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660"= req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP= THIS!] options SCSI_DELAY=3D15000 #Be pessimistic about Joe SCSI= device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on= wd0 controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. tape ft0 at fdc0 drive 2 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE= bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed= devices. controller= ncr0 #controller amd0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 #controller aic0 at isa? port 0x340 bio irq 11 #controller nca0 at isa? port 0x1f88 bio irq 10 #controller nca1 at isa? port 0x350 bio irq 5 #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz= 0x2000 #controller= scbus0 device da0 device sa0 device pass0 #device cd0 #Only need one of these, the code dynamically= grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO= console device sc0 at isa? port IO_KBD conflicts tty irq 1 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console= driver #device vt0 at isa? port IO_KBD conflicts tty irq 1 #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT= lines #options PCVT_SCANSET=3D2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 device lpt0 at isa? port? tty irq 7 device psm0 at isa? port IO_KBD conflicts tty irq 12 # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device rl0 #device tl0 #device tx0 #device vx0 #device xl0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq= ? pseudo-device= loop pseudo-device= ether #pseudo-device= sl= 1 #pseudo-device= ppp 1 #pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter --=====================_910785208==_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19981111015328.007e8290>