Date: Sun, 4 Oct 2009 12:14:04 -0300 From: Vinicius Abrahao <vinnix.bsd@gmail.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: luigi@freebsd.org, freebsd-current <freebsd-current@freebsd.org>, lars.engels@0x20.net, freebsd-usb@freebsd.org, Florent Thoumie <flz@xbsd.org> Subject: Re: CFH: fix multimedia/pwcbsd with usb2 Message-ID: <1e31c7980910040814o48a1a57bgde86571fa3265c4c@mail.gmail.com> In-Reply-To: <200909131508.05025.hselasky@c2i.net> References: <20090908201713.GD41185@e.0x20.net> <a01628140909121905g2c0eb578kbc105fab5b1ca388@mail.gmail.com> <1e31c7980909130516g1b3cb9fn5df77c23ec072413@mail.gmail.com> <200909131508.05025.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Hans, Thanks for your help! I try to do exactly what you say, but without success= . When I attach my camera I see at dmesg: ugen2.3: <vendor 0x093a> at usbus2 Trying pwcview: #./pwcview -d /dev/ugen2.3 Failed to access webcam: Operation not supported by device *********************************************************** Make sure you have connected your webcam to the root hub or to a USB 1.1 hub, also check your dmesg for any errors. *********************************************************** What I'm doing wrong? Thanks again, Best regards, Vin=EDcius On 9/13/09, Hans Petter Selasky <hselasky@c2i.net> wrote: > On Sunday 13 September 2009 14:16:10 Vinicius Abrahao wrote: >> Thanks Florent, >> >> That's it for sure. I recompile my kernel yesterday and now pwcbsd is >> loading normally. >> Therefore, now I see that pwc is the wrong driver for me. My webcam is >> a Philips SPC500NC. >> ID 093a:2603 Pixart Imaging, Inc. >> >> At Google I found that linux-gspca-kmod is the right driver for me. >> But this seen broken as >> pwcbsd was in the past. > > Hi, > > The closes you will currently get is: > > svn --username anonsvn --password anonsvn \ > checkout svn://svn.turbocat.net/i4b/trunk/usbcam/ulinux > > As root: > > make fetch > make patch > make > > You manually have to patch: > > ee libv4l/v4l2-apps/libv4l/libv4lconvert/control/libv4lcontrol.c > > control/libv4lcontrol.c: In function 'v4lcontrol_vidioc_queryctrl': > control/libv4lcontrol.c:586: error: '__u32' undeclared (first use in this > function) > control/libv4lcontrol.c:586: error: (Each undeclared identifier is report= ed > only once > control/libv4lcontrol.c:586: error: for each function it appears in.) > control/libv4lcontrol.c:586: error: expected ';' before 'orig_id' > control/libv4lcontrol.c:600: error: 'orig_id' undeclared (first use in th= is > function) > > __u32 to uint32_t > > In the end: > > cd pwcview > > ./pwcview > > > Should bring your webcam right up in userland though. > > --HPS > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1e31c7980910040814o48a1a57bgde86571fa3265c4c>