Date: Sat, 10 Apr 2004 10:44:16 -0400 From: "Jeff Racine" <jracine@maxwell.syr.edu> To: <freebsd-current@freebsd.org> Subject: sk ethernet driver: watchdog timeout Message-ID: <32A8B2CB12BFC84D8D11D872C787AA9A015E9ACC@EXCHANGE.forest.maxwell.syr.edu>
next in thread | raw e-mail | index | archive | help
Hi.
Still getting this behavior on current... ftp and sftp on large files is =
fine.=20
However, cvsup, rsync etc. crashes the nic with a `watchdog timeout'. =
/etc/netstart
does not do the job, however, if left for a period of hours, the =
interface comes
back up. Thanks Ruslan for keeping an eye on this!
Some information... am running current amd64 dual proc, Iwill DK8X =
motherboard, 3com 7000=20
series controller in a raid 1 configuration... the nic controller is =
onboard...
skc0: Bus reserved 0x4000 bytes for rid 0x10 type 3 at 0xfd9fc000
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:d0:68:03:d4:99
miibus0: <MII bus> on sk0
-- uname -a
FreeBSD jracine.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT #1: Fri =
Apr 9 21:48:00 EDT 2004 =
root@jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON amd64
-- dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Fri Apr 9 21:48:00 EDT 2004
root@jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff808dd000.
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2205.02-MHz K8-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0xf58 Stepping =3D 8
=
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory =3D 3623813120 (3455 MB)
avail memory =3D 3494551552 (3332 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
random: <entropy source, Software, Yarrow>
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [GIANT-LOCKED]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0:0:0: setting power state D0
pci0:7:0: setting power state D0
pci0:7:1: setting power state D0
pci0:7:3: setting power state D0
pci0:7:5: setting power state D0
pci0:10:1: setting power state D0
pci0:11:1: setting power state D0
pci0:24:0: setting power state D0
pci0:24:1: setting power state D0
pci0:24:2: setting power state D0
pci0:24:3: setting power state D0
pci0:25:0: setting power state D0
pci0:25:1: setting power state D0
pci0:25:2: setting power state D0
pci0:25:3: setting power state D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1:0:0: setting power state D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2:0:0: setting power state D0
pci2:0:1: setting power state D0
pci2:6:0: setting power state D0
pci2:7:0: setting power state D0
pci2:7:1: setting power state D0
pci2:7:2: setting power state D0
ohci0: <OHCI (generic) USB controller> mem 0xfd8fe000-0xfd8fefff irq 19 =
at device 0.0 on pci2
ohci0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8fe000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfd8ff000-0xfd8fffff irq 19 =
at device 0.1 on pci2
ohci1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8ff000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
fwohci0: <Texas Instruments TSB43AB22/A> mem =
0xfd8f8000-0xfd8fbfff,0xfd8fd800-0xfd8fdfff irq 18 at device 6.0 on pci2
fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xfd8fd800
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=3D1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:00:00:00:01:0e:f8
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:01:0e:f8
fwe0: Ethernet address: 02:00:00:01:0e:f8
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
ohci2: <NEC uPD 9210 USB controller> mem 0xfd8f7000-0xfd8f7fff irq 19 at =
device 7.0 on pci2
ohci2: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8f7000
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xfd8fc000-0xfd8fcfff irq 16 at =
device 7.1 on pci2
ohci3: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xfd8fc000
ohci3: [GIANT-LOCKED]
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 7.2 (no driver attached)
pci2: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER
pci2:7:2: setting power state D3
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf at device 7.1 =
on pci0
atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0:7:3: setting power state D3
pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 17 at device 7.5 =
on pci0
pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0xcc00
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC655 AC97 Codec>
pcib3: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3:3:0: setting power state D0
skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem =
0xfd9fc000-0xfd9fffff irq 19 at device 3.0 on pci3
skc0: Bus reserved 0x4000 bytes for rid 0x10 type 3 at 0xfd9fc000
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:d0:68:03:d4:99
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, =
1000baseTX-FDX, auto
skc0: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver =
attached)
pci0:10:1: setting power state D3
pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4:1:0: setting power state D0
twe0: <3ware 7000 series Storage Controller. Driver version 1.50.01.000> =
port 0xbc00-0xbc0f mem 0xfe000000-0xfe7fffff irq 17 at device 1.0 on =
pci4
twe0: Bus reserved 0x10 bytes for rid 0x10 type 4 at 0xbc00
twe0: [GIANT-LOCKED]
twe0: 4 ports, Firmware FE7S 1.05.00.063, BIOS BE7X 1.08.00.048
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver =
attached)
pci0:11:1: setting power state D3
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port =
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0 on motherboard
cpu1 on motherboard
orm0: <Option ROMs> at iomem 0xcf800-0xd07ff,0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
Timecounters tick every 0.976 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDRW <SAMSUNG CDRW/DVD SM-352B> at ata1-master PIO4
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 70910MB (145224064 sectors)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/twed0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?32A8B2CB12BFC84D8D11D872C787AA9A015E9ACC>