Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 Sep 1998 11:17:35 +1000 (KDT)
From:      HoGwan Kang <hgkang@kies.co.kr>
To:        freebsd-questions@FreeBSD.ORG
Subject:   Please check this config file[2]
Message-ID:  <Pine.HPP.3.96.980925111603.8981A-100000@kies.co.kr>

next in thread | raw e-mail | index | archive | help

Hello.  I have trouble with CD-ROM driver(atapi wd0)...
Using 2.2.5-RELEASE, there was no problem with detecting and mounting
CD-ROM driver as wd0.  And, after installing 2.2.7-RELEASE, there was also
no problem...  But, aftering compiling new kernel with following
configuration, CD-ROM driver is not detected nor mounted.
Please find out my fault(s) in the following configuration.

-[/sys/i386/conf/TOTORO]-
machine         "i386"
ident           TOTORO
maxusers        10
options         CHILD_MAX=128
options         OPEN_MAX=128
options         FAILSAFE
config          kernel  root on wd0 dumps on wd0
cpu             "I586_CPU"              # aka Pentium(tm)
options         "CPU_FASTER_5X86_FPU"   

options         "COMPAT_43"
options         SYSVSHM
options         SYSVSEM
options         SYSVMSG
options         "MD5"

options         UCONSOLE        
options         INET                    #Internet communications protocols
pseudo-device   ether                   #Generic Ethernet
pseudo-device   loop                    #Network loopback device
options         IPFIREWALL              #firewall
options         IPFIREWALL_VERBOSE      #print information about
                                        # dropped packets
options         "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity
options         IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options         IPDIVERT                #divert sockets

options         FFS                     #Fast filesystem
options         NFS                     #Network File System
options         MSDOSFS                 #MS DOS filesystem
options         "CD9660"                #ISO 9660 filesystem

options         USERCONFIG              #boot -c editor
pseudo-device   pty     16      #Pseudo ttys - can go as high as 256
pseudo-device   speaker         #Play IBM BASIC-style noises out your
speaker
pseudo-device   log             #Kernel syslog interface (/dev/klog)
pseudo-device   gzip            #Exec gzipped a.out's
options         "MSGBUF_SIZE=40960"     

controller      isa0
options         BOUNCE_BUFFERS
options         "MAXMEM=(32*1024)"      

controller      pnp0
device          sc0     at isa? port "IO_KBD" tty irq 1 vector scintr
options         MAXCONS=4               # number of virtual consoles
device          npx0    at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13
vector npxintr

options         "CMD640"        #Enable work around for CMD640 h/w bug
controller      wdc0    at isa? port "IO_WD1" bio irq 14 vector wdintr
disk            wd0     at wdc0 drive 0
disk            wd1     at wdc0 drive 1 
controller      wdc1    at isa? port "IO_WD2" bio irq 15 vector wdintr
disk            wd2     at wdc1 drive 0 
disk            wd3     at wdc1 drive 1

options         ATAPI           #Enable ATAPI support for IDE bus
device          wcd0

controller      fdc0    at isa? port "IO_FD1" bio irq 6 drq 2 vector 
fdintr
disk            fd0     at fdc0 drive 0
disk            fd1     at fdc0 drive 1
tape            ft0     at fdc0 drive 2

device          sio0    at isa? port "IO_COM1" tty irq 4 vector siointr
device          sio1    at isa? disable port "IO_COM2" tty irq 3 vector
siointr
device          lpt0    at isa? port? tty irq 7 vector lptintr
device          lpt1    at isa? disable port "IO_LPT3" tty irq 5 vector
lptintr
device          mse0    at isa? disable port 0x23c tty irq 5 vector
mseintr
device          psm0    at isa? port "IO_KBD" conflicts tty irq 12 vector
psmintr
controller      snd0    
device sb0      at isa? port 0x220 irq 5 drq 1 vector sbintr
device sbxvi0   at isa? conflicts drq 7
device sbmidi0  at isa? port 0x330
device awe0     at isa? port 0x620
options         EXCLUDE_SB_EMULATION            # NO PAS SB emulation
support
options         EXCLUDE_GUS_IODETECT            # NO GUS io detection
options         EXCLUDE_PRO_MIDI                # NO PAS MIDI support
device pca0 at isa? port IO_TIMER1 tty

controller      pci0
device          vx0

-[End of Cofiguration]-



     =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
     |  _!_  |  HoGwan Paul Kang               KIES. Firewall Dev. Team  |
     | (o,o) |  mailto: hgkang@kies.co.kr                                |
     | {`"'} |  http://www.kies.co.kr/~hgkang                            |
     | -"-"- |  office tel: +82-2-529-8400     office fax: +82-2-529-8851|
     =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
	---------------------------------------------------------
$)C
	       8BCc4:=:<-:q=:URL  http://iquick.kies.co.kr
		@LA&4B >I>F<- ?xGO4B A$:88& 9^>F:8<<?d!!!
	---------------------------------------------------------


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.HPP.3.96.980925111603.8981A-100000>