Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 8 Sep 2004 02:44:37 -0500
From:      Axel Gonzalez <loox@e-shell.net>
To:        freebsd-current@freebsd.org
Subject:   [PATCH] Clie TH55 sync over usb (maybe other OS 5 devices too)
Message-ID:  <200409080244.37726.loox@e-shell.net>

next in thread | raw e-mail | index | archive | help

Finally got my TH55 to hotsync with pilot-link.

There was a couple issues:

* It doesn't like the 'getting connection info' part, it just timed out. After 
removing it, attach/detach work fine (don't know if its needed for other 
devices, so in the patch I don't remove it.. my m505 works ok with this 
code).
It was the same problem as described on this thread:
http://lists.freebsd.org/pipermail/freebsd-current/2004-August/033438.html

so maybe this will work for other devices too.


* This device uses 2 pairs of bulk ports, uses first pair for 'in', second for 
'out'. You need to map the correct addresses in order to work (got a hint for 
a little bird on this one).


After this couple fixes (and adding id's for the device), it works just fine.


***begin usbdevs patch***
--- usbdevs.orig        Sat Sep  4 02:07:35 2004
+++ usbdevs     Sun Sep  5 22:34:12 2004
@@ -1312,6 +1312,7 @@
 product SONY CLIE_41_MS                0x0099  Sony Clie v4.1 Memory Stick 
slot
 product SONY CLIE_41           0x009a  Sony Clie v4.1
 product SONY CLIE_NX60         0x00da  Sony Clie nx60
+product SONY CLIE_TH55         0x0144  Sony Clie th55

 /* Sony Ericsson products */
 product        SONYERICSSON DCU10      0x0528  USB Cable
***end usbdevs patch***

***begin uvisor.c patch***
--- uvisor.c.orig       Sun Jun 27 07:41:44 2004
+++ uvisor.c    Wed Sep  8 02:14:44 2004
@@ -207,6 +207,7 @@
        struct usb_devno        uv_dev;
        u_int16_t               uv_flags;
 #define PALM4  0x0001
+#define PALM5  0x0002
 };
 static const struct uvisor_type uvisor_devs[] = {
        {{ USB_VENDOR_HANDSPRING, USB_PRODUCT_HANDSPRING_VISOR }, 0 },
@@ -227,6 +228,7 @@
        {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_S360 }, PALM4 },
        {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_NX60 }, PALM4 },
        {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_35 }, 0 },
+       {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_TH55 }, PALM5 },
 /*     {{ USB_VENDOR_SONY, USB_PRODUCT_SONY_CLIE_25 }, PALM4 },*/
 };
 #define uvisor_lookup(v, p) ((const struct uvisor_type 
*)usb_lookup(uvisor_devs, v, p))
@@ -313,8 +315,11 @@
                addr = ed->bEndpointAddress;
                dir = UE_GET_DIR(ed->bEndpointAddress);
                attr = ed->bmAttributes & UE_XFERTYPE;
-               if (dir == UE_DIR_IN && attr == UE_BULK)
+               if (dir == UE_DIR_IN && attr == UE_BULK) {
+                       if (ucom->sc_bulkin_no != -1)
+                                       continue;
                        ucom->sc_bulkin_no = addr;
+               }
                else if (dir == UE_DIR_OUT && attr == UE_BULK)
                        ucom->sc_bulkout_no = addr;
                else {
@@ -417,17 +422,19 @@
        uWord avail;
        char buffer[256];

-       DPRINTF(("uvisor_init: getting connection info\n"));
-       req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
-       req.bRequest = UVISOR_GET_CONNECTION_INFORMATION;
-       USETW(req.wValue, 0);
-       USETW(req.wIndex, 0);
-       USETW(req.wLength, UVISOR_CONNECTION_INFO_SIZE);
-       err = usbd_do_request_flags(sc->sc_ucom.sc_udev, &req, &coninfo,
-                                   USBD_SHORT_XFER_OK, &actlen,
-                                   USBD_DEFAULT_TIMEOUT);
-       if (err)
-               return (err);
+       if (!(sc->sc_flags & PALM5)) {
+               DPRINTF(("uvisor_init: getting connection info\n"));
+               req.bmRequestType = UT_READ_VENDOR_ENDPOINT;
+               req.bRequest = UVISOR_GET_CONNECTION_INFORMATION;
+               USETW(req.wValue, 0);
+               USETW(req.wIndex, 0);
+               USETW(req.wLength, UVISOR_CONNECTION_INFO_SIZE);
+               err = usbd_do_request_flags(sc->sc_ucom.sc_udev, &req, 
&coninfo,
+                                           USBD_SHORT_XFER_OK, &actlen,
+                                           USBD_DEFAULT_TIMEOUT);
+               if (err)
+                       return (err);
+       }

 #ifdef USB_DEBUG
        {
***end uvisor.c patch***



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409080244.37726.loox>