Date: Fri, 1 May 1998 15:08:40 +0200 (CEST) From: Andre Albsmeier <andre.albsmeier@mchp.siemens.de> To: gaa@dgms.com (Gary Algier) Cc: andre.albsmeier@mchp.siemens.de, freebsd-questions@FreeBSD.ORG Subject: Re: cdrecord: what device? Message-ID: <199805011308.PAA20203@internal> In-Reply-To: <3548BA85.D6F04E89@dgms.com> from Gary Algier at "Apr 30, 98 01:53:09 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> andre.albsmeier@mchp.siemens.de wrote: > > > > > Ok, I have a Yamaha CRW4260. It is connected to an Adaptec 2940UW. > > > I am running FreeBSD 2.2.6. > [...] > > > I can access the device just fine as /dev/cd0c as if it is a cdrom > [...] > > > > > I have enabled worm0 in the kernel and the cdrecord port will > > create the following link when being installed: > > > > lrwxrwxrwx 1 root sys 10 Feb 13 10:09 scgx@ -> rworm0.ctl > > > > which works great here with my Yamaha CDR100 > > > > -Andre > > I looked at the /dev directory and there was: > lrwxrwxrwx 1 root sys 10 Apr 14 14:23 sgx@ -> rworm0.ctl > > Notice the misspelled name. I checked and the other FreeBSD system I have > had the same entry. I have no idea how it got created. It was created, by mistake, by an earlier version of the Makefile in the cdrecord port. Look at http://www.freebsd.org/cgi/cvsweb.cgi/ports/sysutils/cdrecord/Makefile > > I tried to install the worm driver, but it won't find it, no how. > I unconfigured "cd0" and it then shows up as "uk0". I finally configured > "cd0" in and "worm0" out. I then just tried a variation on what you did > and: > cd /dev ; ln -s rcd0.ctl scgx > > This works just fine. That's interesting. I have also heard that cdrecord doesn't use the worm device. However, I have always had the worm device in the kernel (and the CDR100 gets properly detected by it) and it worked... But know I can throw out the worm entry and will configure it like you did. > > Thanks for the help. No problem. -Andre To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199805011308.PAA20203>