Date: Thu, 02 Mar 2000 20:19:44 +0900 From: Ichise <IZY00466@nifty.ne.jp> To: freebsd-questions@FreeBSD.ORG Subject: Please Check my kernel config Message-ID: <200003021119.UAA01179@ums503.nifty.ne.jp>
next in thread | raw e-mail | index | archive | help
Please correct my kernel config !
*$BF|K\8l$GNI$$$N$+$I$&$+J,$+$i$J$$$N$G!"$3$N$h$&$K=q$-$^$7$?!#(B
*$B%+!<%M%k$N:F9=C[$N$H$-!"(Bmake $B$G$D$^$C$F$7$^$$$^$7$?!#(B
*$B2<$K%3%s%U%#%0%l!<%7%g%s$H(B make $B$G$N%(%i!<$rIU$1$^$9$N$G!"(B
*$B8+D>$7$r<jEA$C$F$/$@$5$$!#(B
--------------this is my kernel config-----------
machine "i386"
#cpu "I386_CPU"
#cpu "I486_CPU"
cpu "I586_CPU"
cpu "I686_CPU"
ident "N4MINI"
maxusers 10
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MFS #Memory Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffer
s
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options USER_LDT
# If your laptop have not had Windoze95-Ready BIOS, please update it.
# Such old BIOS'es sometimes have critical bugs at 32-bit protected
# mode APM BIOS interface (which have not used by Windoze 3.1).
# PC-card suspend/resume support (experimental)
options APM_PCCARD_RESUME
options PCIC_RESUME_RESET
# Keep power for serial cards when the system suspends
# (If your machine hangs up when you try to suspend the system with
# FAX/Modem PCMCIA card, uncomment this option).
options SIO_SUSP_KEEP_PWR
# Detach SCSI devices when the SCSI card is removed
options SCSI_DETACH
# Detach ATAPI devices when the ATA card is removed
options ATAPI_DETACH
# Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz
# band that US version uses. If you want to use Japanese version of
# WaveLAN, uncomment this line, or edit the corresponding config entry
# of /etc/pccard.conf.
options "WAVELAN_PCMCIA_24"
# Suspend the system when the battery status is "Low"
options "APM_BATT_LOW_SUSPEND"
# If you want to use NTP on laptop machines, uncomment the following
# option. Current APM implementation affects NTP client.
#options "APM_NO_CLOCK_ADJUST"
# For Win98 BIOS of ThinkPad options
#options "APM_TP_WIN98BIOS"
# Some X-servers cannot survive suspend/resume on laptop.
# This option kicks her when the system is resumed from suspended mode.
#options SYSCONS_VTY_RESUME
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
# Dont remove these two lines!
pseudo-device card 1
device pcic0
# You must use "flags 0x1" when you don't hear any negotiation noise(?)
# if you use modem card, or pccardd doesn't read cis tuple, tell you
# 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's
# pcic is your PC.
device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 vector pcicintr
device pcic0 at isa? port 0x3e0 irq 11 vector pcicintr
device pcic0 at isa? port 0x3e4 irq 11 vector pcicintr
device pcic1 at isa? port 0x3e2 # for HiNote Ultra II
device pcic1 at isa? port 0x3e4 # for Chandra II
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#controller fdc1 at isa? disable port "IO_YEFDC" bio irq 6 vector fdint
r
#disk fd1 at fdc1 drive 0
options FDC_YE
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd1 at wdc1 drive 0
controller wdc2 at isa? disable port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc2 drive 0
controller wdc3 at isa? disable port "IO_WD2" bio irq 15 vector wdintr
disk wd3 at wdc3 drive 0
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
#device wcd0 #IDE CD-ROM
device wfd0 #IDE floppy (LS-120)
# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
controller ncr0
controller amd0
controller ahb0
controller ahc0
controller dpt0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
controller nin0 at isa? port 0x280 bio irq 5 vector ninintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector se
aintr
controller spc0 at isa? port 0x320 bio irq 11 iomem 0xd0000 flags 0x01
vector spcintr
# Future domain and Q-logic PC-card SCSI drivers
# ported from NetBSD/pc98 (based on NetBSD 1.2)
#options SCSI_LOW # XXX: for ncv? and stg? driver
#controller ncv0 at isa? port 0x320 bio irq 5 vector ncvintr
controller stg0 at isa? port 0x320 bio irq 5 vector stgintr
#options DPT_MEASURE_PERFORMANCE # Required by DPT driver??
#options DPT_VERIFY_HINTR # Some hardware must have it!
#options DPT_TRACK_CCB_STATES # Some hardware must have it!
#options DPT_HANDLE_TIMEOUTS # Some hardware must have it!
#options DPT_TIMEOUT_FACTOR=4 # Some hardware needs more
controller scbus0
device sd0
device od0 #See LINT for possible `od' options.
device st0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? # Advanced Power Management
options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? disable port "IO_COM3" tty irq 5 vector sioint
r
device sio3 at isa? disable port "IO_COM4" tty irq 9 vector sioint
r
device sio4 at isa? disable port "IO_COM3" tty irq 5 vector sioint
r
device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt1 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmi
ntr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device tl0
#device tx0
#device vx0
#device xl0
device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr
device ed1 at isa? disable port 0x300 net irq 10 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
device ep1 at isa? disable port 0x300 net irq 10 vector epintr
#device ex0 at isa? port? net irq? vector exintr
device fe0 at isa? port 0x300 net irq 10 vector feintr
device fe1 at isa? disable port 0x300 net irq 10 vector feintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
device sn0 at isa? port 0x300 net irq 10 vector snintr
device sn1 at isa? disable port 0x300 net irq 10 vector snintr
#device wlp0 at isa? port 0x300 net irq 11 vector wlpintr
#device wlp1 at isa? disable port 0x300 net irq 11 vector wlpintr
#device cs0 at isa? disable port 0x300 net irq ? vector csintr
#device cnw0 at isa? port 0x300 net irq 5 vector cnwintr
#device cnw1 at isa? disable port 0x300 net irq 5 vector cnwintr
# do not enable ze0 and zp0 (these devices are obsolete)
##device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
##device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
# IBM Smart Capture PCMCIA card
#device scc0
#device scc1
# Hitachi microcomputer system Speach Synthesizer card
#device hss0
#device hss1
# PCMCIA Joystick
#device joy0 at isa? port "IO_GAME"
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
#DHCP uses BPF (Berkeley Packet Filter)
pseudo-device bpfilter 4
#ijppp uses tun instead of ppp device
pseudo-device ppp 1
pseudo-device vn 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
options DDB
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
#options KTRACE #kernel tracing
# This provides support for System V shared memory.
#
options SYSVSHM
options SYSVSEM
options SYSVMSG
#sound driver
#device pcm0 at isa? port 0x530 tty irq 05 drq 1 flags 0x0
#controller pnp0
-----------------------end of my kernel config--------------
======================make error============================
../../pci/pcic_p.c:144: warning: no previous prototype for `get_pci_pcic_info'
../../pci/pcic_p.c:158: warning: no previous prototype for `get_pci_pcic_slots
'
../../pci/pcic_p.c:590: warning: no previous prototype for `set_controller_inf
o'../../pci/ncr.c:1486: warning: initialization discards `volatile' from point
er target type
../../pci/ncr.c:1486: warning: initialization discards `volatile' from pointer
target type
../../i386/isa/clock.c:645: warning: function declaration isn't a prototype
../../i386/isa/sio.c:2796: warning: function declaration isn't a prototype
tmc18c30.o: Undefined symbol `_scsi_low_reset_nexus' referenced from text segm
ent
tmc18c30.o: Undefined symbol `_scsi_low_calcf' referenced from text segment
tmc18c30.o: Undefined symbol `_scsi_low_bus_reset' referenced from text segmen
t
tmc18c30.o: Undefined symbol `_scsi_low_reselected' referenced from text segme
nttmc18c30.o: Undefined symbol `_scsi_low_print' referenced from text segment
tmc18c30.o: Undefined symbol `_scsi_low_restart' referenced from text segment
tmc18c30.o: Undefined symbol `_scsi_low_disconnected' referenced from text seg
ment
tmc18c30.o: Undefined symbol `_scsi_low_start' referenced from text segment
tmc18c30.o: Undefined symbol `_scsi_low_msgout' referenced from text segment
tmc18c30.o: Undefined symbol `_scsi_low_msgin' referenced from text segment
tmc18c30if.o: Undefined symbol `_scsi_low_attach' referenced from text segment
tmc18c30if.o: Undefined symbol `_scsi_low_init_ccbque' referenced from text se
gment
tmc18c30if.o: Undefined symbol `_scsi_low_timeout' referenced from text segmen
t
tmc18c30if.o: Undefined symbol `_scsi_low_scsi_cmd' referenced from data segme
nttmc18c30if.o: Undefined symbol `_scsi_low_scsi_minphys' referenced from data
segment
tmc18c30if.o: Undefined symbol `_scsi_low_target_open' referenced from data se
gment
=========================end of make error==============================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003021119.UAA01179>