Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 6 Jun 2003 12:51:46 +0200
From:      Alexander Leidinger <Alexander@Leidinger.net>
To:        Jeremy Messenger <mezz7@cox.net>
Cc:        current@freebsd.org
Subject:   Re: VIA ACPI power management controller
Message-ID:  <20030606125146.72adad8c.Alexander@Leidinger.net>
In-Reply-To: <oprqa8dtor8ckrg5@smtp.central.cox.net>
References:  <20030605161425.71dec07a.Alexander@Leidinger.net> <oprqa3fxzr8ckrg5@smtp.central.cox.net> <200306052056.57000.michaelnottebrock@gmx.net> <oprqa5j1e38ckrg5@smtp.central.cox.net> <oprqa8dtor8ckrg5@smtp.central.cox.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 05 Jun 2003 14:57:19 -0500
Jeremy Messenger <mezz7@cox.net> wrote:

> > Do'h! You are right that I didn't check in /usr/src/sys/conf/.. It does 
> > exist and I am doing the rebuild kernel right now.. Thanks..
> 
> Here's the result:
> ================================
> # dmesg | grep via
> viapropm0: SMBus I/O base at 0x5000
> viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at 
> device 7.4 on pci0
> viapropm0: failed to enable port mapping!
> viapropm0: could not allocate bus space
> device_probe_and_attach: viapropm0 attach returned 6
> ================================

> I don't know what the errors mean..

(4) netchild@ttyp0 % dmesg |grep via  
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc04ffc20.
viapropm0: SMBus I/O base at 0x5000
viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device 7.4 on pci0
viapropm0: failed to enable port mapping!
viapropm0: could not allocate bus space
device_probe_and_attach: viapropm0 attach returned 6

This problem is under investigation. We already know why this error gets
printed, but there is still a discussion how to fix it cleanly.

When you install xmbmon you can get some information out of it:
---snip---
(5) netchild@ttyp0 % mbmon 

Temp.=  0.0,  0.0, 24.7; Rot.= 3479,    0,    0
Vcore = 1.64, 3.27; Volt. = 3.29, 5.00, 12.19,   0.00,  0.00
---snip---

I started the thread to know how to integrate it into ACPI.

Bye,
Alexander.

-- 
         The computer revolution is over. The computers won.

http://www.Leidinger.net                       Alexander @ Leidinger.net
  GPG fingerprint = C518 BC70 E67F 143F BE91  3365 79E2 9C60 B006 3FE7



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030606125146.72adad8c.Alexander>