Date: Tue, 5 Nov 2002 03:48:13 +0100 (CET) From: Marc Schneiders <marc@schneiders.org> To: Jeff Love <jl@burghcom.com> Cc: Glenn Johnson <gjohnson@srrc.ars.usda.gov>, <stable@FreeBSD.ORG> Subject: Re: SMP broken on PPro Message-ID: <20021105034312.U35007-100000@voo.doo.net> In-Reply-To: <20021105014516.67904.qmail@snoop.burghcom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 4 Nov 2002, at 20:45 [=GMT-0500], Jeff Love wrote:
> I'm running 4.7-STABLE on a dual ppro/200. I'll cvsup and see what
> happens(takes a while on these old boxes).
No problems here, as far as I can see (machine has no screen though
:-). I was rebuilding when the message about problems came in.
Rebooted fine afterwards. Dmesg below (which may help to narrow down
the device that causes problems??).
Cvsup-ped about 6 hours ago from the Dutch cvsup mirror.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.7-STABLE #0: Tue Nov 5 02:17:10 CET 2002
marc@fuchsia.bijt.net:/usr/obj/usr/src/sys/FUCHSIA
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (199.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 134217728 (131072K bytes)
avail memory = 127287296 (124304K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0349000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 17 -> irq 2
IOAPIC #0 intpin 19 -> irq 16
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0x7f80-0x7f9f irq 2 at
device 10.0 on pci0
ed0: address 00:xxxxxxxxxxxxx, type NE2000 (16 bit)
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 12.0
irq 16
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 10 on
isa0
ep0: Ethernet address 00:xxxxxxxxxxxxxxx
ep1: <3Com 3C509-Combo EtherLink III> at port 0x230-0x23f irq 5 on
isa0
ep1: Ethernet address 00:xxxxxxxxxxxxxxx
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 4111MB <ST34312A> [8354/16/63] at ata0-master WDMA2
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021105034312.U35007-100000>