Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Mar 2001 15:44:36 +0100 (CET)
From:      Alexander Leidinger <Alexander@Leidinger.net>
To:        gibbs@freebsd.org
Cc:        current@freebsd.org
Subject:   aic7880 prints some timeouts after recent commit (yesterday)
Message-ID:  <200103121444.f2CEicK04384@Magelan.Leidinger.net>

next in thread | raw e-mail | index | archive | help
--0-1804289383-984408280=:3603
Content-Type: TEXT/plain; charset=us-ascii

Hi,

dmesg and the output of "ident /sys/dev/aic7xxx/*" and pciconf is
attached (BTW: the -v options to pciconf isn't documented in the
synopsis section of the man page).

Do you need more information, e.g. the output of a verbose boot?

Bye,
Alexander.

-- 
                Where do you think you're going today?

http://www.Leidinger.net                       Alexander @ Leidinger.net
  GPG fingerprint = C518 BC70 E67F 143F BE91  3365 79E2 9C60 B006 3FE7

--0-1804289383-984408280=:3603
Content-Type: TEXT/plain; name="dmesg.mist"
Content-Disposition: attachment; filename="dmesg.mist"

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #6: Sun Mar 11 20:42:30 CET 2001
    root@Magelan.Leidinger.net:/big/usr/src/sys/compile/WORK
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.93-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134205440 (131060K bytes)
avail memory = 126312448 (123352K bytes)
Preloaded elf kernel "kernel" at 0xc0419000.
Preloaded elf module "vesa.ko" at 0xc041909c.
Preloaded elf module "cd9660.ko" at 0xc0419138.
Preloaded elf module "mfs.ko" at 0xc04191d8.
Preloaded elf module "msdos.ko" at 0xc0419274.
Preloaded elf module "procfs.ko" at 0xc0419314.
Preloaded elf module "linux.ko" at 0xc04193b4.
Preloaded elf module "usb.ko" at 0xc0419454.
Preloaded elf module "random.ko" at 0xc04194f0.
Preloaded elf module "atspeaker.ko" at 0xc0419590.
Preloaded elf module "agp.ko" at 0xc0419634.
Preloaded elf module "accf_data.ko" at 0xc04196d0.
Preloaded elf module "accf_http.ko" at 0xc0419774.
Preloaded elf module "joy.ko" at 0xc0419818.
Preloaded elf module "snd_pcm.ko" at 0xc04198b4.
Preloaded elf module "snd_sbc.ko" at 0xc0419954.
Preloaded elf module "snd_sb16.ko" at 0xc04199f4.
Pentium Pro MTRR support enabled
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc036b357 (1000117)
VESA: 3dfx Interactive, Inc.
Using $PIR table, 7 entries at 0xc00f0d10
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0xe800-0xe80f irq 9 at device 4.3 on pci0
intpm0: I/O mapped e800
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped e400 
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xb000-0xb0ff mem 0xd9800000-0xd9800fff irq 9 at device 6.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xa800-0xa81f irq 9 at device 10.0 on pci0
ed0: address 00:80:ad:40:bd:e7, type NE2000 (16 bit) 
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x6 on isa0
sc0: VGA <16 virtual consoles, flags=0x206>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20010 on isa0
sio0: type ST16650A
sio1 at port 0x2e8-0x2ef irq 10 flags 0x20000 on isa0
sio1: type ST16650A
pca0 at port 0x40 on isa0
isic0 at port 0x1b00-0x1b1f,0x16e0-0x16ff,0x6e0-0x6ff,0xee0-0xeff,0x1300-0x131f,0x300-0x31f,0xb00-0xb1f irq 3 flags 0x4 on isa0
isic0: passive stack unit 0
isic0: AVM A1 or Fritz!Card Classic
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
sc1: <System console> on isa0
sc1: MDA <16 virtual consoles, flags=0x0>
WARNING: Driver mistake: repeat make_dev("consolectl")
vga1: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sbc0: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0303> can't assign resources
pca1: <AT-style speaker sound> at port 0x61 on isa0
WARNING: Driver mistake: repeat make_dev("pcaudio")
WARNING: Driver mistake: repeat make_dev("pcaudioctl")
i4bctl: ISDN system control port attached
i4brbch: 2 raw B channel access device(s) attached
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
i4bisppp: 2 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
i4btrc: 2 ISDN trace device(s) attached
ad0: 19547MB <FUJITSU MPE3204AT> [39714/16/63] at ata0-master UDMA33
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata1-master PIO0
Waiting 5 seconds for SCSI devices to settle
(probe13:ahc0:0:14:0): SCB 0x10 - timed out in Data-out phase, SEQADDR == 0x177
STACK == 0x180, 0x189, 0x0, 0xe
SXFRCTL0 == 0x80
ahc0: Dumping Card State at SEQADDR 0x177
SCSISEQ = 0x12, SBLKCTL = 0x2, SSTAT0 0x5
SCB count = 20
Kernel NEXTQSCB = 7
Card NEXTQSCB = 16
QINFIFO entries: 16 15 14 8 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
Pending list: 8 14 15 16 
Kernel Free SCB list: 17 18 19 0 1 2 3 4 5 6 9 13 12 11 10 
Untagged Q(1): 14 
Untagged Q(2): 8 
Untagged Q(14): 16 
Untagged Q(15): 15 
sg[0] - Addr 0x596684 : Length 36
(probe13:ahc0:0:14:0): SCB 16: Immediate reset.  Flags = 0x6040
(probe13:ahc0:0:14:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 4 SCBs aborted
Mounting root from ufs:/dev/ad0s2a
cd1 at ahc0 bus 0 target 2 lun 0
cd1: <PIONEER CD-ROM DR-U16S 1.01> Removable CD-ROM SCSI-2 device 
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ahc0:0:1:0): SCB 0xf - timed out in Data-out phase, SEQADDR == 0x177
STACK == 0x180, 0x189, 0xe, 0xe
SXFRCTL0 == 0x80
ahc0: Dumping Card State at SEQADDR 0x177
SCSISEQ = 0x12, SBLKCTL = 0x2, SSTAT0 0x5
SCB count = 20
Kernel NEXTQSCB = 16
Card NEXTQSCB = 15
QINFIFO entries: 15 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
Pending list: 15 
Kernel Free SCB list: 14 8 7 17 18 19 0 1 2 3 4 5 6 9 13 12 11 10 
Untagged Q(1): 15 
sg[0] - Addr 0x4571e0 : Length 32
(cd0:ahc0:0:1:0): SCB 15: Immediate reset.  Flags = 0x6048
(cd0:ahc0:0:1:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <TEAC CD-R55S 1.0Q> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Logical unit is in process of becoming ready
i4b-L2 i4b_T202_timeout: unit 0, N202 = 3
i4b: unit 0, assigned TEI = 79 = 0x4f
i4b-L2 i4b_T200_timeout: unit 0, RC = 0

--0-1804289383-984408280=:3603
Content-Type: TEXT/plain; name="ident.txt"
Content-Disposition: attachment; filename="ident.txt"

/sys/dev/aic7xxx/CVS/:

/sys/dev/aic7xxx/ahc_eisa.c:
     $FreeBSD: src/sys/dev/aic7xxx/ahc_eisa.c,v 1.21 2001/03/11 06:34:16 gibbs Exp $

/sys/dev/aic7xxx/ahc_pci.c:
     $FreeBSD: src/sys/dev/aic7xxx/ahc_pci.c,v 1.41 2001/03/11 06:34:16 gibbs Exp $

/sys/dev/aic7xxx/aic7770.c:
     $Id: //depot/src/aic7xxx/aic7770.c#8 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7770.c,v 1.4 2001/03/11 06:34:16 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx.c:
     $Id: //depot/src/aic7xxx/aic7xxx.c#34 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx.c,v 1.71 2001/03/11 06:34:16 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx.h:
     $Id: //depot/src/aic7xxx/aic7xxx.h#22 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx.h,v 1.37 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx.reg:
     $Id: //depot/src/aic7xxx/aic7xxx.reg#14 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx.reg,v 1.35 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx.seq:
     $Id: //depot/src/aic7xxx/aic7xxx.seq#23 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx.seq,v 1.113 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx_93cx6.c:
     $Id: //depot/src/aic7xxx/aic7xxx_93cx6.c#7 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx_93cx6.c,v 1.13 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx_93cx6.h:
     $Id: //depot/src/aic7xxx/aic7xxx_93cx6.h#5 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx_93cx6.h,v 1.9 2000/12/20 01:11:37 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx_freebsd.c:
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx_freebsd.c,v 1.23 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx_freebsd.h:
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx_freebsd.h,v 1.8 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx_inline.h:
     $Id: //depot/src/aic7xxx/aic7xxx_inline.h#17 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx_inline.h,v 1.14 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aic7xxx_pci.c:
     $Id: //depot/src/aic7xxx/aic7xxx_pci.c#19 $
     $FreeBSD: src/sys/dev/aic7xxx/aic7xxx_pci.c,v 1.13 2001/03/11 06:34:17 gibbs Exp $

/sys/dev/aic7xxx/aicasm/:

--0-1804289383-984408280=:3603
Content-Type: TEXT/plain; name="pciconf.txt"
Content-Disposition: attachment; filename="pciconf.txt"

agp0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0x71808086 rev=0x03 hdr=0x00
pcib1@pci0:1:0:	class=0x060400 card=0x00000000 chip=0x71818086 rev=0x03 hdr=0x01
isab0@pci0:4:0:	class=0x060100 card=0x00000000 chip=0x71108086 rev=0x01 hdr=0x00
atapci0@pci0:4:1:	class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
uhci0@pci0:4:2:	class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
intpm0@pci0:4:3:	class=0x068000 card=0x00000000 chip=0x71138086 rev=0x01 hdr=0x00
ahc0@pci0:6:0:	class=0x010000 card=0x78809004 chip=0x80789004 rev=0x01 hdr=0x00
ed0@pci0:10:0:	class=0x020000 card=0x802910ec chip=0x802910ec rev=0x00 hdr=0x00
none0@pci1:0:0:	class=0x030000 card=0x0030121a chip=0x0005121a rev=0x01 hdr=0x00

--0-1804289383-984408280=:3603--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103121444.f2CEicK04384>