Date: Wed, 06 Apr 2005 14:42:43 -0500 From: "Paul T. Root" <ptroot@iaces.com> To: Shea Frederick <justarock@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: unable to mount secondary hard disks now Message-ID: <42543BB3.1000202@iaces.com> In-Reply-To: <6bd74b4b05040612163e0dcc88@mail.gmail.com> References: <6bd74b4b05040612163e0dcc88@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm not entirely sure, but it sure looks like da1s4c to me.
Why is one drive da0c and the other da1s1c? How did you set them
up?
Shea Frederick wrote:
> Im running FreeBSD 5.3, its an almost fresh install. Its been running
> for about 7 days now. I have an internal IDE drive that the OS runs
> from, then I have two external firewire drives (da0, da1) that are
> only used as Samba shares.
>
> This morning i found that one of the firewire drives are no longer
> mounted (da1), this might have happened when I uninstalled Samba 2.x
> and installed 3.x yesterday, then rebooted. but im not sure, because i
> didnt check to see if the drive was still mounted after the reboot.
>
> So i figured i would just mount it again (even though da1 in the fstab)....
>
> FileServer# mount /dev/da1s1c /mnt/jabba
> mount: /dev/da1s1c on /mnt/jabba: incorrect super block
>
> So now im not realy sure what to do, this drive was working perfectly
> before the reboot.
>
> someone told me to run fsck on the drive, but that gives me the following error.
>
> FileServer# fsck /dev/da1s1c
> ** /dev/da1s1c
> Cannot find file system superblock
> /dev/da1s1c: NOT LABELED AS A BSD FILE SYSTEM (unused)
>
> here is what fdisk returns...
>
> FileServer# fdisk /dev/da1s1c
> ******* Working on device /dev/da1s1c *******
> parameters extracted from in-core disklabel are:
> cylinders=9728 heads=255 sectors/track=63 (16065 blks/cyl)
>
> Figures below won't work with BIOS for partitions not in cyl 1
> parameters to be used for BIOS calculations are:
> cylinders=9728 heads=255 sectors/track=63 (16065 blks/cyl)
>
> Media sector size is 512
> Warning: BIOS sector numbering starts with sector 1
> Information from DOS bootblock is:
> The data for partition 1 is:
> <UNUSED>
> The data for partition 2 is:
> <UNUSED>
> The data for partition 3 is:
> <UNUSED>
> The data for partition 4 is:
> sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
> start 0, size 50000 (24 Meg), flag 80 (active)
> beg: cyl 0/ head 0/ sector 1;
> end: cyl 1023/ head 254/ sector 63
>
> Here are the relevant lines from my fstab...
> /dev/da0c /mnt/yoda ufs rw 2 2
> /dev/da1s1c /mnt/jabba ufs rw 2 2
>
> Thanks in advance
> -Shea
--
______ Paul T. Root
/ _ \ 1977 MGB
/ /|| \\
||\/ || _ |
|| || ||
\ ||__//
\______/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42543BB3.1000202>