Date: Sat, 10 Apr 2004 17:29:28 +0100 From: Scott Mitchell <scott+freebsd@fishballoon.org> To: Pete Carss <itinerant@mac.com> Cc: freebsd-current@freebsd.org Subject: Re: Cisco driver stopped working with -current Message-ID: <20040410162928.GA25661@llama.fishballoon.org> In-Reply-To: <4078026A.9070907@mac.com> References: <4078026A.9070907@mac.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Apr 10, 2004 at 03:19:22PM +0100, Pete Carss wrote: > I've updated my system last night, an acpi-only compaq nx9005 laptop. No > difference to my ability to suspend/resume, still doesn't work. Also it > seems to have broken the an0 driver (for Cisco Cards) or rather my > pcmcia card is now picked up by the xe driver rather than an. I get the > following from dmesg: > > xe0: <Cisco Systems 340 Series Wireless LAN Adapter> at port 0x100-0x13f > irq 10 function 0 config 5 on pccard1 > device_probe_and_attach: xe0 attach returned 19 Your second problem is probably my fault - I added a bunch of cards that are supported by xe yesterday. Not sure why it picked up your Cisco card though. Can you boot with hw.pccard.debug=1 and hw.pccard.cis_debug=1 (you'll need to break into the loader at boot time and set them there) and send me the resulting output (should end up in /var/run/dmesg.boot)? Cheers, Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott at fishballoon.org | 0xAA775B8B | -- Anon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040410162928.GA25661>