Date: Fri, 16 Jan 2004 21:31:51 +0100 (CET) From: Eivind Olsen <eivind@aminor.no> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/61443: FreeBSD 5.2-RELEASE installation stops at /stand/sysinstall Message-ID: <20040116203151.3766B78E10@vimes.aminor.no> Resent-Message-ID: <200401162040.i0GKeD48096157@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 61443 >Category: i386 >Synopsis: FreeBSD 5.2-RELEASE installation stops at /stand/sysinstall >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jan 16 12:40:12 PST 2004 >Closed-Date: >Last-Modified: >Originator: Eivind Olsen >Release: FreeBSD 5.2-RELEASE i386 >Organization: Aminor >Environment: Fujitsu Siemens Lifebook. Intel Pentium 4, 1.6GHz. 256MB RAM >Description: The FreeBSD 5.2-RELEASE CDs are unable to start the installation. Doing a verbose boot, the last lines I see are: [...] start_init: trying /stand/sysinstall [...and after a while:...] acpi_cmbat1: battery initialization failed, giving up Then nothing more happens. The computer hasn't crashed since it does allow me to for example scroll up/down in the console. A very similar problem was reported by someone else in PR 60671, but that person managed to continue by removing the NIC (PCCARD). I have tried disabling the built-in wireless NIC but it didn't help. Here is the boot-log (booting using 'boot -Dhv' to get it all on serial console): SMAP type=01 base=0000000000000000 len=000000000009e800 SMAP type=02 base=000000000009e800 len=0000000000001800 SMAP type=02 base=00000000000dc000 len=0000000000024000 SMAP type=01 base=0000000000100000 len=000000000fdf0000 SMAP type=03 base=000000000fef0000 len=000000000000b000 SMAP type=04 base=000000000fefb000 len=0000000000005000 SMAP type=01 base=000000000ff00000 len=0000000000080000 SMAP type=02 base=000000000ff80000 len=0000000000080000 SMAP type=02 base=00000000fff00000 len=0000000000100000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e6b000. Preloaded mfs_root "/boot/mfsroot" at 0xc0e6b254. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e6b298. Calibrating clock(s) ... i8254 clock: 1193133 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1594836608 Hz CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz (1594.84-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 267911168 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001029000 - 0x000000000fa53fff, 245542912 bytes (59947 pages) 0x000000000ff00000 - 0x000000000ff77fff, 491520 bytes (120 pages) avail memory = 246341632 (234 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6590 bios32: Entry = 0xfd790 (c00fd790) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd790+0x1f8 pnpbios: Found PnP BIOS data at 0xc00f65c0 pnpbios: Entry = f0000:90ef Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <FUJ ROCK > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 30 A 0x60 3 4 5 7 9 10 11 embedded 0 30 B 0x61 3 4 5 7 9 10 11 embedded 0 30 C 0x62 3 4 5 7 9 10 11 embedded 0 30 D 0x63 3 4 5 7 9 10 11 embedded 2 10 A 0x60 3 4 5 7 9 10 11 embedded 2 10 B 0x61 3 4 5 7 9 10 11 embedded 2 13 A 0x62 3 4 5 7 9 10 11 embedded 2 13 B 0x63 3 4 5 7 9 10 11 embedded 2 12 A 0x62 3 4 5 7 9 10 11 embedded 2 14 A 0x61 3 4 5 7 9 10 11 embedded 0 0 A 0x60 3 4 5 7 9 10 11 embedded 0 0 B 0x61 3 4 5 7 9 10 11 embedded 0 0 C 0x62 3 4 5 7 9 10 11 embedded 0 0 D 0x63 3 4 5 7 9 10 11 embedded 0 31 A 0x62 3 4 5 7 9 10 11 embedded 0 31 B 0x61 3 4 5 7 9 10 11 embedded 0 29 A 0x60 3 4 5 7 9 10 11 embedded 0 29 B 0x63 3 4 5 7 9 10 11 embedded 0 29 C 0x62 3 4 5 7 9 10 11 embedded 0 1 A 0x60 3 4 5 7 9 10 11 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 2 dev 10 func 0 AcpiOsDerivePciId: bus 2 dev 10 func 1 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 ACPI timer looks GOOD min = 4, max = 4, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0 acpi_cpu0: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.PCI0.LPC0.LNKA irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.29.0 \_SB_.PCI0.LPC0.LNKD irq 0: [ 3 4 5 7 9 10 11] low,level,sharable 0.29.1 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.29.2 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.31.0 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.31.1 ---- before setting priority for links ------------ \_SB_.PCI0.LPC0.LNKD: interrupts: 3 4 5 7 9 10 11 penalty: 1110 1110 110 1110 110 110 510 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \_SB_.PCI0.LPC0.LNKD: interrupts: 3 4 5 7 9 10 11 penalty: 1110 1110 110 1110 110 110 510 references: 1 priority: 595 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.LPC0.LNKA irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.29.0 \_SB_.PCI0.LPC0.LNKD irq 10: [ 3 4 5 7 9 10 11] low,level,sharable 0.29.1 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.29.2 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.31.0 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base ec000000, size 26, enabled found-> vendor=0x8086, dev=0x1a30, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1a31, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000018c0, size 5, enabled pcib0: matched entry for 0.29.INTA (source \_SB_.PCI0.LPC0.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 000018e0, size 5, enabled pcib0: matched entry for 0.29.INTC (source \_SB_.PCI0.LPC0.LNKC) pcib0: slot 29 INTC is routed to irq 11 found-> vendor=0x8086, dev=0x2487, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001c20, size 4, enabled map[24]: type 1, range 32, base e8000000, size 10, enabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001c00, size 5, enabled pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2483, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00001000, size 8, enabled map[14]: type 4, range 32, base 00001880, size 6, enabled pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00001400, size 8, enabled map[14]: type 4, range 32, base 00001800, size 7, enabled pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xe8100000-0xe81fffff pcib1: prefetched decode 0xf0000000-0xf7ffffff ---- initial configuration ------------------------ \_SB_.PCI0.LPC0.LNKA irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 1.0.0 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 1.0.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.LPC0.LNKA irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 1.0.0 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 4, range 32, base 00002000, size 8, enabled map[18]: type 1, range 32, base e8100000, size 16, enabled pcib1: matched entry for 1.0.INTA (source \_SB_.PCI0.LPC0.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x4c57, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x18c0-0x18df irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x18e0-0x18ff irq 11 at device 29.2 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 4 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xe8200000-0xe82fffff pcib2: prefetched decode 0xf8000000-0xf80fffff ---- initial configuration ------------------------ \_SB_.PCI0.LPC0.LNKA irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.10.0 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.10.1 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.12.0 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.13.0 \_SB_.PCI0.LPC0.LNKD irq 10: [ 3 4 5 7 9 10 11] low,level,sharable 2.13.1 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.14.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.LPC0.LNKA irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.10.0 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.10.1 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.12.0 \_SB_.PCI0.LPC0.LNKC irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.13.0 \_SB_.PCI0.LPC0.LNKD irq 10: [ 3 4 5 7 9 10 11] low,level,sharable 2.13.1 \_SB_.PCI0.LPC0.LNKB irq 11: [ 3 4 5 7 9 10 11] low,level,sharable 2.14.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 pcib2: matched entry for 2.10.INTA (source \_SB_.PCI0.LPC0.LNKA) pcib2: slot 10 INTA is routed to irq 11 found-> vendor=0x1217, dev=0x6933, revid=0x02 bus=2, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pcib2: matched entry for 2.10.INTB (source \_SB_.PCI0.LPC0.LNKB) pcib2: slot 10 INTB is routed to irq 11 found-> vendor=0x1217, dev=0x6933, revid=0x02 bus=2, slot=10, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00003000, size 8, enabled map[14]: type 1, range 32, base e8204800, size 8, enabled pcib2: matched entry for 2.12.INTA (source \_SB_.PCI0.LPC0.LNKC) pcib2: slot 12 INTA is routed to irq 11 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=2, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f8000000, size 12, enabled pcib2: matched entry for 2.13.INTA (source \_SB_.PCI0.LPC0.LNKC) pcib2: slot 13 INTA is routed to irq 11 found-> vendor=0x1260, dev=0x3873, revid=0x01 bus=2, slot=13, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8204000, size 11, enabled map[14]: type 1, range 32, base e8200000, size 14, enabled pcib2: matched entry for 2.14.INTA (source \_SB_.PCI0.LPC0.LNKB) pcib2: slot 14 INTA is routed to irq 11 found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=2, slot=14, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> irq 11 at device 10.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xe8200000-0xe82fffff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x69331217 0x04100007 0x06070002 0x00822000 0x10: 0xe8200000 0x020000a0 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x0c0023bf 0x824203ea 0x20500000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> irq 11 at device 10.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xe8200000-0xe82fffff cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x69331217 0x04100007 0x06070002 0x00822000 0x10: 0xe8201000 0x020000a0 0x20040402 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400020b 0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x0c0023bf 0x824203ea 0x20500000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pcib2: device re0 requested decoded I/O range 0x3000-0x30ff pcib2: device rl0 requested decoded I/O range 0x3000-0x30ff rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xe8204800-0xe82048ff irq 11 at device 12.0 on pci2 pcib2: device rl0 requested decoded I/O range 0x3000-0x30ff rl0: Ethernet address: 00:e0:00:ae:51:50 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 13.0 on pci2 pcib2: device wi0 requested decoded memory range 0xf8000000-0xf8000fff wi0: 802.11 address: 00:e0:00:89:17:f7 wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.1) wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0xe8200000-0xe8203fff,0xe8204000-0xe82047ff irq 11 at device 14.0 on pci2 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xe8204000-0xe82047ff fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:0e:10:00:e0:73:1c fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x3 loop=0, retry=0 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:0e:e0:73:1c fwe0: bpf attached sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe8000000-0xe80003ff at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) acpi_button0: <Power Button> on acpi0 unknown: not probed (disabled) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 73 02 14 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console unknown: not probed (disabled) sio1: irq maps: 0x801 0x809 0x801 0x801 sio1 port 0x400-0x43f,0x2e8-0x2ef irq 3 drq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1594836608 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ata1: spurious interrupt - status=0x00 error=0x01 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 0f5ac000 OUTL ST2 ALL ALL 12 00000000 0f5ac080 8411:0774 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 bus_explore done sbp_post_explore (sbp_cold=2) md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09dff74 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 4 steps (100% to 25.0%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start cbb0: Unsupported card type detected cbb1: Unsupported card type detected ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH3 chip ata0-master: setting UDMA100 on Intel ICH3 chip GEOM: Configure md0a, start 0 length 4423680 end 4423679 GEOM: Configure md0c, start 0 length 4423680 end 4423679 GEOM: create disk ad0 dp=0xc32cc360 ad0: <HITACHI_DK23EA-30/00K4A0A2> ATA-5 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 ar: FreeBSD check1 failed GEOM: new disk ad0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:58605057 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 30005789184 end 30005821439 GEOM: Configure ad0s1a, start 0 length 419430400 end 419430399 GEOM: Configure ad0s1b, start 419430400 length 1073741824 end 1493172223 GEOM: Configure ad0s1c, start 0 length 30005789184 end 30005789183 GEOM: Configure ad0s1e, start 1493172224 length 134217728 end 1627389951 GEOM: Configure ad0s1f, start 1627389952 length 8589934592 end 10217324543 GEOM: Configure ad0s1g, start 10217324544 length 8589934592 end 18807259135 GEOM: Configure ad0s1h, start 18807259136 length 11198530048 end 30005789183 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel ICH3 chip acd0: <HITACHI DVD-ROM GD-S250/0012> DVDROM drive at ata1 as master acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error Mounting root from ufs:/dev/md0 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /stand/sysinstall acpi_cmbat1: battery initialization failed, giving up >How-To-Repeat: Boot from mini-install CD or CD1 of FreeBSD 5.2-RELEASE on similar hardware. >Fix: unknown >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040116203151.3766B78E10>