Date: Fri, 20 Aug 1999 07:52:58 +0200 (SAST) From: Randy Bush <randy@psg.com> To: FreeBSD Laptoppers <freebsd-mobile@freebsd.org> Cc: Mark Murray <mark@grondar.za> Subject: wi0 nic problem Message-ID: <m11Hhbm-00000BC@cdsec.com>
next in thread | raw e-mail | index | archive | help
3.2-release + PAO3-19990809.tar.gz sony 505tx 128m lucent pc24e-00-fc p/n 01q420/a wavelan ieee802.11 # Lucent WaveLAN/IEEE card "Lucent Technologies" "WaveLAN/IEEE" config default "wi0" any insert logger -p Lucent WaveLAN/IEEE inserted insert /etc/pccard_ether $device remove logger -p Lucent WaveLAN/IEEE removed remove /etc/pccard_ether_remove $device Return IRQ=10 Card removed, slot 0 Slot 0, unfielded interrupt (0) Aug 20 07:36:33 roam root: Etherlink III removed Card inserted, slot 0 Aug 20 07:38:34 roam pccardd[58]: Card "Lucent Technologies"("WaveLAN/IEEE") [Ve rsion 01.01] [] matched "Lucent Technologies" ("WaveLAN/IEEE") [(null)] [(null)] card0: assign wi0 iobase 0x300 irq 10 wi0: <WaveLAN/IEEE 802.11> at 0x300-0x33f irq 10 on isa wi0: Ethernet address: 00:60:1d:03:f3:fb wi0: device timeout wi0: init failed wi0: failed to allocate 1594 bytes on NIC wi0: tx buffer allocation failed wi0: failed to allocate 1594 bytes on NIC wi0: mgmt. buffer allocation failed wi0: xmit failed wi0: device timeout wi0: init failed wi0: failed to allocate 1594 bytes on NIC wi0: tx buffer allocation failed wi0: failed to allocate 1594 bytes on NIC wi0: mgmt. buffer allocation failed wi0: xmit failed wi0: device timeout wi0: init failed wi0: failed to allocate 1594 bytes on NIC wi0: tx buffer allocation failed wi0: failed to allocate 1594 bytes on NIC wi0: mgmt. buffer allocation failed # # Sample Laptop Configuration # for lenlen.ntc.keio.ac.jp (Toshiba Libretto 50CT) # Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org> # machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" #cpu "I686_CPU" ident ROAM maxusers 64 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem #options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem #options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console #options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor # Soft updates is technique for improving file system speed and # making abrupt shutdown less risky. It is not enabled by default due # to copyright restraints on the code that implement it. # # Read .../../ufs/ffs/README.softupdates to learn what you need to # do to enable this. ../../../contrib/sys/softupdates/README gives # more details on how they actually work. # options SOFTUPDATES # You may need to reset all pccards after resuming options PCIC_RESUME_RESET # Detach SCSI devices when the SCSI card is removed #options SCSI_DETACH # Detach ATAPI devices when the ATA card is removed #options ATAPI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" #options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. #options "APM_NO_CLOCK_ADJUST" # PAO Enhanced PCI-PCIC support (experimental) #options CB_TEST #options FORCE_IRQ_ROUTING config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 #controller pnp0 #controller eisa0 controller pci0 # Dont remove these two lines! pseudo-device card 1 # You must use "flags 0x1" when you don't hear any negotiation noise(?) # if you use modem card, or pccardd doesn't read cis tuple, tell you # 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's # pcic is your PC. #device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 device pcic0 at isa? port 0x3e0 irq 11 #device pcic0 at isa? port 0x3e4 irq 11 #device pcic1 at isa? port 0x3e2 # for HiNote Ultra II #device pcic1 at isa? port 0x3e4 # for Chandra II controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device acd0 #IDE CD-ROM #device wfd0 #IDE floppy (LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller scbus0 #device da0 #device sa0 #device pass0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty options MAXCONS=4 # number of virtual consoles # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # pcm: Luigi's sound driver device pcm1 at isa? port? tty irq 5 drq 1 flags 0x0 vector pcmintr # # Laptop support (see LINT for more options) # device apm0 at isa? # Advanced Power Management device sio0 at isa? port "IO_COM1" tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 #device sio2 at isa? disable port "IO_COM3" tty irq 5 #device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? #device plip0 at ppbus? #device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ed1 at isa? disable port 0x300 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 #device ep1 at isa? disable port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq 10 #device fe1 at isa? disable port 0x300 net irq 10 #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device sn0 at isa? port 0x300 net irq 10 #device sn1 at isa? disable port 0x300 net irq 10 device wlp0 at isa? port 0x300 net irq 10 #device wlp1 at isa? disable port 0x300 net irq 11 #device cs0 at isa? disable port 0x300 net irq ? #device cnw0 at isa? port 0x300 net irq 5 #device cnw1 at isa? disable port 0x300 net irq 5 #device ux0 at isa? port 0x300 net irq 5 device wi0 device xe0 # do not enable ze0 and zp0 (these devices are obsolete) ##device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 ##device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 # IBM Smart Capture PCMCIA card #device scc0 #device scc1 # Hitachi microcomputer system Speach Synthesizer card #device hss0 #device hss1 # PCMCIA Joystick #device joy0 at isa? port "IO_GAME" # PCMCIA GPIB card #device gp0 at isa? port 0x2c0 tty pseudo-device loop pseudo-device ether #pseudo-device sl 1 #pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 2 pseudo-device pty 16 #pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. #options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVSEM options SYSVMSG # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 4 #Berkeley packet filter Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #0: Fri Aug 20 10:13:20 SAST 1999 root@roam.psg.com:/usr/src/sys/compile/ROAM Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (quarter-micron) (298.45-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x582 Stepping=2 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 134217728 (131072K bytes) avail memory = 127770624 (124776K bytes) Preloaded elf kernel "kernel" at 0xc02a0000. Probing for devices on PCI bus 0: chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0 chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3 vga0: <NeoMagic NM2160 laptop SVGA controller> rev 0x01 int a irq 9 on pci0.8.0 pcic0: <Ricoh RL5C475 PCI-CardBus Brige> rev 0x00 int a irq 0 on pci0.10.0 RL5C4XX PCI Config Reg: [CSC isa irq] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <4 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 pcm1 at 0x220 irq 5 drq 1 on isa ESS1879 (rev 11, native mode) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <TOSHIBA MK6412MAT> wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ep0 not found at 0x300 wlp0 not found at 0x300 pcic0 at 0x3e0-0x3e1 irq 11 on isa PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 Initializing PC-card drivers: ep wi wlp xe sio wdc Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s2a Card inserted, slot 0 ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates cmd ntpd pid 116 tried to use non-present sched_get_priority_min cmd ntpd pid 116 tried to use non-present sched_setscheduler card0: assign ep0 iobase 0x300 irq 10 ep0: utp/bnc[*UTP*] address 00:a0:24:ac:89:33 ep0: unload Return IRQ=10 Card removed, slot 0 Slot 0, unfielded interrupt (0) Card inserted, slot 0 card0: assign wi0 iobase 0x300 irq 10 wi0: <WaveLAN/IEEE 802.11> at 0x300-0x33f irq 10 on isa wi0: Ethernet address: 00:60:1d:03:f3:fb wi0: device timeout wi0: init failed wi0: failed to allocate 1594 bytes on NIC wi0: tx buffer allocation failed wi0: failed to allocate 1594 bytes on NIC wi0: mgmt. buffer allocation failed wi0: xmit failed wi0: device timeout wi0: init failed wi0: failed to allocate 1594 bytes on NIC wi0: tx buffer allocation failed wi0: failed to allocate 1594 bytes on NIC wi0: mgmt. buffer allocation failed wi0: xmit failed wi0: device timeout wi0: init failed wi0: failed to allocate 1594 bytes on NIC wi0: tx buffer allocation failed wi0: failed to allocate 1594 bytes on NIC roam.psg.com:/usr/home/randy/Mail> pccardc dumpcis Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 01 f7 Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 2Kb, 1 units Device number 2, type Reserved, WPS = OFF , Memory block size = 512b, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4 000: 68 52 08 ff Attribute memory device information: Device number 1, type SRAM, WPS = ON Speed = No speed, Memory block size = 8Kb, 11 units Device number 2, type No device, WPS = ON Speed = No speed, Memory block size = reserved, 32 units Tuple #3, code = 0x1e (Geometry info for common memory), length = 236 000: 04 40 5a 08 ff 15 50 05 00 4c 75 63 65 6e 74 20 010: 54 65 63 68 6e 6f 6c 6f 67 69 65 73 00 57 61 76 020: 65 4c 41 4e 2f 49 45 45 45 00 56 65 72 73 69 6f 030: 6e 20 30 31 2e 30 31 00 00 00 00 00 00 00 00 00 040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 050: 00 00 00 00 00 00 ff 20 04 56 01 02 00 21 02 06 060: 00 22 02 01 07 22 05 02 40 42 0f 00 22 05 02 80 070: 84 1e 00 22 02 03 07 22 08 04 06 00 60 1d 03 f3 080: fb 22 02 05 01 1a 07 03 01 e0 03 00 00 01 1b 0f 090: c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff ff 0a0: 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d0: ff ff ff ff ff ff ff ff ff ff ff ff 00 fa ff ff 0e0: ff ff ff ff ff ff ff ff ff ff ff ff width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80 partition = 0x40000000, interleave = 0x100000 Tuple #4, code = 0xff (Terminator), length = 0 1 slots found To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m11Hhbm-00000BC>