Date: Mon, 24 Sep 2007 09:35:48 -0400 From: Yousif Hassan <yousif@alumni.jmu.edu> To: vermaden <vermaden@interia.pl> Cc: freebsd-x11@freebsd.org Subject: Re: ASUS P5B-MX + 6.2-STABLE + xf86-video-intel Message-ID: <1190640948.1245.2.camel@localhost> In-Reply-To: <20070924130245.12FEB12390B@f44.poczta.interia.pl> References: <20070924130245.12FEB12390B@f44.poczta.interia.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
Can't really tell from what you've sent if you've enabled/loaded "device agp". Either put that in your kernel, or kldload it. I believe modern Intel cards require this. On Mon, 2007-09-24 at 15:02 +0200, vermaden wrote: > Long story short. > > Can not get intel driver (from xf86-video-intel 2.1.1) to work with Asus P5B-MX IGA. > > vesa driver works, but that is not the point here... > > kernel config: GENERIC > > # uname -a > FreeBSD siewa 6.2-STABLE FreeBSD 6.2-STABLE #0: Mon Sep 24 12:58:17 CEST 2007 root@siewa:/usr/obj/usr/src/sys/CUSTOM i386 > > # kldstat > Id Refs Address Size Name > 1 12 0xc0400000 7cfd04 kernel > 2 1 0xc0bd0000 6348c acpi.ko > 3 1 0xc52b1000 1c000 linux.ko > 4 1 0xc5543000 6000 i915.ko > 5 1 0xc5549000 f000 drm.ko > > # dmesg > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-STABLE #0: Mon Sep 24 12:58:17 CEST 2007 > root@siewa:/usr/obj/usr/src/sys/CUSTOM > ACPI APIC Table: <A_M_I_ OEMAPIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Genuine Intel(R) CPU 2160 @ 1.80GHz (1800.01-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x6f2 Stepping = 2 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,<b9>,CX16,<b14>,<b15>> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 1064960000 (1015 MB) > avail memory = 1028931584 (981 MB) > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <A_M_I_ OEMRSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <display, VGA> at device 2.0 (no driver attached) > pci0: <multimedia> at device 27.0 (no driver attached) > uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 23 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 19 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 18 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 16 at device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe9f7c00-0xfe9f7fff irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 19 at device 0.0 on pci1 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:90:cc:de:5e:0c > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port 0xc480-0xc487,0xc400-0xc403,0x8f0-0x8f7,0x8f8-0x8fb,0xbc00-0xbc0f irq 18 at device 31.1 on pci0 > ata2: <ATA channel 0> on atapci0 > ata3: <ATA channel 1> on atapci0 > atapci1: <Intel ICH7 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f irq 19 at device 31.2 on pci0 > ata4: <ATA channel 0> on atapci1 > ata5: <ATA channel 1> on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > ata1 at port 0x170-0x177,0x376 irq 15 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1800012429 Hz quality 800 > Timecounters tick every 1.000 msec > acd0: CDROM <SAMSUNG CD-ROM SC-148S/SS03> at ata2-slave PIO4 > ad8: 152627MB <WDC WD1600JS-60MHB5 10.02E04> at ata4-master SATA150 > Trying to mount root from ufs:/dev/ad8s1a > > # pciconf -lv > hostb0@pci0:0:0: class=0x060000 card=0x823b1043 chip=0x29708086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > class = bridge > subclass = HOST-PCI > none0@pci0:2:0: class=0x030000 card=0x823b1043 chip=0x29728086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > class = display > subclass = VGA > none1@pci0:27:0: class=0x040300 card=0x82901043 chip=0x27d88086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) High Definition Audio' > class = multimedia > uhci0@pci0:29:0: class=0x0c0300 card=0x81791043 chip=0x27c88086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > uhci1@pci0:29:1: class=0x0c0300 card=0x81791043 chip=0x27c98086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > uhci2@pci0:29:2: class=0x0c0300 card=0x81791043 chip=0x27ca8086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > uhci3@pci0:29:3: class=0x0c0300 card=0x81791043 chip=0x27cb8086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > ehci0@pci0:29:7: class=0x0c0320 card=0x81791043 chip=0x27cc8086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' > class = serial bus > subclass = USB > pcib1@pci0:30:0: class=0x060401 card=0x81791043 chip=0x244e8086 rev=0xe1 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge' > class = bridge > subclass = PCI-PCI > isab0@pci0:31:0: class=0x060100 card=0x81791043 chip=0x27b88086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801GB/GR (ICH7 Family) LPC Interface Controller' > class = bridge > subclass = PCI-ISA > atapci0@pci0:31:1: class=0x01018f card=0x81791043 chip=0x27df8086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) Ultra ATA Storage Controller' > class = mass storage > subclass = ATA > atapci1@pci0:31:2: class=0x01018f card=0x81791043 chip=0x27c08086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller' > class = mass storage > subclass = ATA > none2@pci0:31:3: class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) SMBus Controller' > class = serial bus > subclass = SMBus > rl0@pci1:0:0: class=0x020000 card=0x10015354 chip=0x813910ec rev=0x10 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' > class = network > subclass = ethernet > > > # cat /etc/X11/xorg.conf > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > RgbPath "/usr/local/share/X11/rgb" > ModulePath "/usr/local/lib/xorg/modules" > EndSection > > Section "Module" > Load "dri" > Load "glx" > Load "dbe" > Load "extmod" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/sysmouse" > EndSection > > Section "Monitor" > Identifier "Monitor0" > HorizSync 30.0 - 83.0 > VertRefresh 55.0 - 75.0 > Option "DPMS" > EndSection > > Section "Device" > Identifier "Card0" > Driver "intel" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1280x1024" > EndSubSection > EndSection > > % startx (as user) > xddc64f78f1b2b3b2d02454c8cd0c339c: not found > xauth: creating new authority file /home/vermaden/.serverauth.860 > > > X Window System Version 7.2.0 > Release Date: 22 January 2007 > X Protocol Version 11, Revision 0, Release 7.2 > Build Operating System: FreeBSD 6.2-STABLE i386 > Current Operating System: FreeBSD siewa 6.2-STABLE FreeBSD 6.2-STABLE #0: Mon Sep 24 12:58:17 CEST 2007 root@siewa:/usr/obj/usr/src/sys/CUSTOM i386 > Build Date: 31 July 2007 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 24 14:55:11 2007 > (==) Using config file: "/etc/X11/xorg.conf" > (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Couldn't allocate video memory > > Fatal server error: > AddScreen/ScreenInit failed for driver 0 > > X connection to :0.0 broken (explicit kill or server shutdown). > > # ls -l /dev/agpgart > ls: /dev/agpgart: No such file or directory > > Thanks in advance. > > > ---------------------------------------------------------------------- > Gra - zostan agentem ABW! > Zobacz >>> http://link.interia.pl/f1ba5 > > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1190640948.1245.2.camel>