Date: Thu, 15 Dec 2011 17:29:57 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Stefan Bethke <stb@lassitu.de> Cc: freebsd-embedded@freebsd.org Subject: Re: TL-WR1043: switch Message-ID: <CAJ-VmokBfJE4CDUdk=nRwdGM=ixjC3QxbsrJM%2BoYqGzdPK5kiQ@mail.gmail.com> In-Reply-To: <CAJ-VmokGYpwepUYa_a4vJViU_5JRh9PetQpvwhTiMqUNxZnzgA@mail.gmail.com> References: <68ABED76-CB1F-405A-8036-EC254F7511FA@lassitu.de> <3B3DB17D-BF87-40EE-B1C1-445F178E8844@lassitu.de> <86030CEE-6839-4B96-ACDC-2BA9AC1E4AE4@lassitu.de> <2D625CC9-A0E3-47AA-A504-CE8FB2F90245@lassitu.de> <203BF1C8-D528-40C9-8611-9C7AC7E43BAB@lassitu.de> <3C0E9CA3-E130-4E9A-ABCC-1782E28999D1@lassitu.de> <CAJ-VmomWsGy9wMb0zA-WjTRP6Qh%2BO2u_Pe-rgkerFFpi04iKnw@mail.gmail.com> <6387ABA5-AC55-49DD-9058-E45CC0A3E0A0@lassitu.de> <CAJ-VmonM91s-kbbEqVDy9PvtH-gxLWYmusGiqzqCWMtfMdoo2A@mail.gmail.com> <EA0807C1-6FEE-4743-8DCA-1AC873664005@lassitu.de> <74E4AF57-3D22-415E-B913-176753B09B16@lassitu.de> <710E2C7A-E9AC-4103-8C61-0EDC4A3AF9DE@lassitu.de> <C2885254-F02C-401B-B56D-39F62933F3CC@lassitu.de> <24FB4633-B729-4582-9FF6-CA8656742985@lassitu.de> <CAJ-VmokGYpwepUYa_a4vJViU_5JRh9PetQpvwhTiMqUNxZnzgA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! So I have it working; I've not tried vlans yet (I'm still building an updated world complete with your config tool) so I'll report when I've tested that, but so far so good. Both ports work, the default vlan tag works, port status seems to work. Thanks very much for this! So next is looking at ray@'s work in zrouter on the ar8216/ar8316 switch PHYs. There's going to be some rather (un) fun stuff, including figuring out what to do about gluing in ukphy/switchphy entries as needed, shared MII bus, etc. Question: the tplink 1043nd arge0 hints currently has a phymask of 0x000c, with a nailed up media/duplex. This avoids attaching a ukphy to the device. How should that now be handled? Instead of this phymask thing, add a flag which says "don't use a phy, we're attaching another way" so that code path doesn't run, but it doesn't try probing a PHY? Or? Adrian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokBfJE4CDUdk=nRwdGM=ixjC3QxbsrJM%2BoYqGzdPK5kiQ>