Date: Fri, 02 Apr 1999 14:45:17 -0500 From: "Gary Palmer" <gpalmer@freebsd.org> To: freebsd-mobile@freebsd.org Subject: 3com 575 Message-ID: <12335.923082317@noop.colo.erols.net>
next in thread | raw e-mail | index | archive | help
Hi, I've downloaded and patched up a kernel with the patches posted by `UCHIYAMA Yasushi <uch@nop.or.jp>' two weeks ago or so. I have a 3Com 3CCFE575BT-D (according to the back) (rebadged as a Dell card). However, the vendor/product ID's don't match any 3Com card (infact I suspect the vendor is Intel). dmesg shows: Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (267.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping=2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>> real memory = 134217728 (131072K bytes) avail memory = 128118784 (125116K bytes) Preloaded elf kernel "kernel.3.1" at 0xf025e000. mainbus0 (root) BIOS32 rev. 0 found at 0xffe90 PCI BIOS rev. 2.1 config mechanism: [1][x] special cycle: [x][x] last bus#:00 pcibios_get_intr_routing: interrupt routing map is broken. mainbus_attach: PCI BIOS fix up failed. pci0 at mainbus0 Probing for devices on PCI bus 0: pchb0 at pci0 dev 0 func 0: Intel 82443BX host to PCI bridge (AGP disabled) vga1 at pci0 dev 2 func 0: NeoMagic NM2160 laptop SVGA controller cbb0 at pci0 dev 3 func 0 (TI1131), flags 3 cbb0: CardBus resister address 0x0 -> 0x68000000 intrpin A, intrtag 11 CardBus latency time 0x10 PCI latency time 0x20 ExCA regs: 0x803: 10 0x805: 00 0x81e: 00 intr_establish:irq=11 trigger=level ipl=bio cbb0: interrupting at irq 11 PCI config regs: 0x00: ac15104c 02000007 06070001 00822008 0x10: 68000000 02000000 10000000 fffff000 0x20: 00000000 fffff000 00000000 fffffffc 0x30: 00000000 fffffffc 00000000 0340010b 0x40: 00741028 00000001 00000000 00000000 0x80: 00241024 00000000 00000000 00000000 0x90: 0070aa00 00000000 00000000 00000000 0xa0: 00000000 00000000 00000000 00000000 socket regs: 00000000 00000006 30000006 00000000 00000000 ExCA regs: 84 00 00 10 00 00 00 00 cardbus0 at cbb0 bus 0 device 0 pccbbattach: found cardbus pcmcia0 at cbb0 slot 0 cbb1 at pci0 dev 3 func 1 (TI1131), flags 3 cbb1: CardBus resister address 0x0 -> 0x68010000 intrpin B, intrtag 11 CardBus latency time 0x10 PCI latency time 0x20 ExCA regs: 0x803: 10 0x805: 00 0x81e: 00 intr_establish:irq=11 trigger=level ipl=bio cbb1: interrupting at irq 11 PCI config regs: 0x00: ac15104c 02000007 06070001 00822008 0x10: 68010000 02000000 10000000 fffff000 0x20: 00000000 fffff000 00000000 fffffffc 0x30: 00000000 fffffffc 00000000 0340020b 0x40: 00741028 00000001 00000000 00000000 0x80: 00243024 00000000 00000000 00000000 0x90: 0070aa00 00000000 00000000 00000000 0xa0: 00000000 00000000 00000000 00000000 socket regs: 00000000 00000006 30000820 00000000 00000000 ExCA regs: 84 0c 00 10 00 00 00 00 cardbus1 at cbb1 bus 0 device 1 cardbusattach: CardBus card found [0x2] cardbus_attach_card: cb1 start pccbb_power: CARDBUS_VCC_3V and CARDBUS_VPP_UC [1] cardbus_attach_card: Vendor 0x8086, Product 0x7192, CIS 0x0 WRONG TUPLE xl0 at cardbus1 dev 0 function 0pccbb_io_open: 0x8300[0x2c] - 0x8380[0x30] pccbb_cardenable: command reg 0x2000007 xl0: failed to enable I/O ports! pccbbattach: found cardbus pcmcia1 at cbb1 slot 1 pcib0 at pci0 dev 7 func 0: Intel 82371AB PCI to ISA bridge vendor 0x8086 id 0x7111 at pci0 dev 7 func 1: not configured uhci0 at pci0 dev 7 func 2: Intel 82371AB/EB USB Host Controller intr_establish:irq=11 trigger=level ipl=bio usb0 at uhci0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chipset0 at pci0 dev 7 func 3: Intel 82371AB Power management controller isa0 at pcib0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support sc0 at isa0 sc0: VGA color <16 virtual consoles, flags=0x0> vga0 at isa0 npx0 at isa0 irq 13: INT 16 interface apm0 at isa0: found APM BIOS version 1.2 atkbdc0 at isa0 atkbd0 at isa0 irq 1 psm0 at isa0 irq 12 intr_establish:irq=12 trigger=level ipl=bio : model Generic PS/2 mouse, device ID 0 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 intr_establish:irq=6 trigger=edge ipl=bio : FIFO enabled, 8 bytes threshold wdc0 at isa0 irq 14 wd0 at wdc0 unit 0: <IBM-DKLA-24320> 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S isapnp0: no ISA Plug 'n Play devices found changing root device to wd0s2a As you can see, I hacked the cardbus stuff a bit to try and get the xl0 driver to attach to the card, but no luck. Is this indeed a card based on an intel chip? Anyone know? What is a good card to get which is available today and supported? Thanks, Gary P.S. This is a Dell Lattitude CPi, if anyone is curious. -- Gary Palmer FreeBSD Core Team Member FreeBSD: Turning PC's into workstations. See http://www.FreeBSD.ORG/ for info To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?12335.923082317>