Date: Sat, 6 Oct 2001 08:50:19 -0700 From: John Merryweather Cooper <john_m_cooper@yahoo.com> To: Maxim Sobolev <sobomax@FreeBSD.org> Cc: gnome@FreeBSD.org, ports@FreeBSD.org Subject: Re: GNOME megaupdate [gal/gtkhtml/ORBit/bonobo-conf/librsvg/evolution/sodipodi] - correct patch Message-ID: <20011006085019.A14625@johncoop.MSHOME> In-Reply-To: <200110060723.KAA03417@ipcard.iptcom.net>; from sobomax@FreeBSD.org on Sat, Oct 06, 2001 at 00:23:23 -0700 References: <20011005223443.A73833@johncoop.MSHOME> <200110060723.KAA03417@ipcard.iptcom.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2001.10.06 00:23 Maxim Sobolev wrote:
> It is likely that you see this because you did not follow recommended
> testing procedure (see my original message below). Due to some
> changes,
> you have to remove all GNOME components first, and then rebuild them
> all from scratch. portupgrade is of little help here, sorry.
>
> -Maxim
>
No, I followed the instructions in the e-mail for the first pass
(pkg_delete'd ORBit, make clean, make install in gnome-fifth-toe).
I was using portupgrade only in an attempt to recover/build as much
as possible. I have a working system, it just doesn't have quite
everything . . . :)
I think my suggestion on including portupgrade was confusing. My
appologies.
--
jmc
MacroHard -- the perfection of form over
substance, marketing over
performance, and greed over
design . . .
> On Fri, 5 Oct 2001 22:34:43 -0700, John Merryweather Cooper wrote:
> >
> > On 2001.10.05 07:51 Maxim Sobolev wrote:
> > > OOPS, sorry I've attached wrong file. Trying again.
> > >
> > > -Maxim
> > >
> >
> > I've made five passes on getting it all to build so far.
> >
> > On pass I, oaf failed in the configure stage (I'd deinstalled ORBit
> > prior to starting the re-build of gnome-fifth-toe). ORBit got built
> > a little further down in the build, so . . .
> >
> > On pass II, I used portupgrade -fr oaf. oaf, gconf, and gnome-print
> > (plus some other stuff) got built. Build of bonobo fails toward the
> > end when it can't find libgnomeprint/gnome-print.h. So, on to pass
> III
> > . .
> >
> > On pass III, I used portupgrade -fr bonobo. Bonobo fails in the
> same
> > manner as previously described. So, on to pass IV . . .
> >
> > On pass IV, I used portupgrade -fr gnomeprint. gnomeprint rebuilt
> fine,
> > but Bonobo remains broken. Oh, well; I'll try one more time . . .
> >
> > On pass V, I used portupgrade -fr bonobo again. Samo, samo.
> >
> > --
> > jmc
> >
> > MacroHard -- the perfection of form over
> > substance, marketing over
> > performance, and greed over
> > design . . .
> >
> > P.S. Now might be a good time to add portupgrade to one or both
> GNOME
> > mega-meta-ports. Although the last megaupdate built fine, changes
> to
> > the ABI numbers for GAL and gtkhtml required rebuild Balsa, etc.
> > portupgrade makes this so much simpler. :)
> > ==========================================================================
> > > Maxim Sobolev wrote:
> > >
> > > > Hi Gnome'rs!
> > > >
> > > > Attached please find a patch that updates five core GNOME
> > > > components and two applications included into GNOME metaport
> > > > to the latest versions. Please test this patch and report
> > > > any problems. If there are no serious problems I'm planning
> > > > to commit it at the very beginning of the next week.
> > > >
> > > > As usually following is the correct procedure to test the
> > > > patchset:
> > > >
> > > > 1. Remove old ORBit and all ports that depend on it:
> > > >
> > > > # pkg_delete `cat /var/db/pkg/ORBit-*/+REQUIRED_BY`;
> > > > pkg_delete ORBit*
> > > > (users of -current and very recent -stable can use
> > > > "pkg_delete -r ORBit*" instead)
> > > >
> > > > 2. Patch your /usr/ports tree;
> > > >
> > > > # cd /usr/ports ; patch -p1 -s <
> > > > /where/you/put/it/gnomeupdate.diff
> > > >
> > > > 3. Run build either of full GNOME metaport:
> > > >
> > > > # cd /usr/ports/x11/gnome-fifth-toe ; make clean ; make
> > > > install clean
> > > >
> > > > or core GNOME components:
> > > >
> > > > # cd /usr/ports/x11/gnome ; make clean ; make install clean
> > > >
> > > > 4. Test it and report back any unusual problems.
> > > >
> > > > Thanks!
> > > >
> > > > -Maxim
> > >
> > > Index: ports/x11-toolkits/gal/Makefile
> [snip]
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011006085019.A14625>