Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Oct 2006 15:25:36 -0400 (EDT)
From:      Charles Sprickman <spork@bway.net>
To:        freebsd-scsi@freebsd.org
Subject:   mysterious panic w/adaptec RAID
Message-ID:  <Pine.OSX.4.61.0610091516450.416@gee5.nat.fasttrackmonkey.com>

next in thread | raw e-mail | index | archive | help
Hi all,

I have a problem that is moving from box to box as I move a specific 
Postgres database around.  I think so far it has happened on at least 
three different boxes.  I am unable to get a kernel dump since the panic 
seems to lock up the whole disk subsystem and then freeze up the box.

These are all 4.11 boxes, all using Adaptec 2110s or 2015s ZCR cards.  2 
are supermicro boxes, 1 an older Intel box.  All are dual processor boxes 
(1 dual P-III, 2 dual Xeon).  I understand this is not much to go on, but 
are there any known issues with the asr driver in 4.11?

In all examples, the "current process" is dpteng.

This is all I get, the panic message gets caught by the console server and 
saved in a log:

[-- MARK -- Fri Oct  6 03:00:00 2006]


Fatal trap 12: page fault while in kernel mode
mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
fault virtual address   = 0x4
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc012c76e
stack pointer           = 0x10:0xe9b4dc44
frame pointer           = 0x10:0xe9b4dc44
code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 29675 (dpteng)
interrupt mask          = cam  <- SMP: XXX
trap number             = 12
panic: page fault
mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
boot() called on cpu#0

syncing disks... asr0: Blink LED 0x43 resetting adapter
[-- MARK -- Fri Oct  6 04:00:00 2006]

Another:

[-- MARK -- Tue Aug  1 16:00:00 2006]


Fatal trap 12: page fault while in kernel mode
mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
fault virtual address   = 0x4
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc012c78e
stack pointer           = 0x10:0xeb8b2c44
frame pointer           = 0x10:0xeb8b2c44
code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 23840 (dpteng)
interrupt mask          = cam  <- SMP: XXX
trap number             = 12
panic: page fault
mp_lock = 00000002; cpuid = 0; lapic.id = 00000000
boot() called on cpu#0

syncing disks... asr0: Blink LED 0x3 resetting adapter
(da0:asr0:0:0:0): lost device

Any ideas?

Thanks,

Charles



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSX.4.61.0610091516450.416>